2024-2026 Ford Edge SUV Vehicle Care User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Vehicle Care for Your Ford Edge SUV Third Generation (2024-2026)

REMOVING A HEADLAMP
ASSEMBLY
1. Open the hood. See Opening and
Closing the Hood (page 283).
E194758
2. Remove the screws.
3. Pull the headlamp toward the front of
the vehicle to disengage it from the
lower fixing point.
4. Lift the headlamp up and remove it.
E133750
5
5. Disconnect the electrical connector.
CHANGING A HEADLAMP BULB
WARNING: Switch the lamps and
the ignition off. Failure to follow this
warning could result in serious personal
injury.
WARNING: Bulbs can become hot.
Let the bulb cool down before removing
it. Failure to do so could result in
personal injury.
299
2024 Edge (CDQ) Canada/United States of America, enUSA, Edition date: 202306, DOM
Maintenance
E188959
C
Headlamp low beam.A
Headlamp low and high beam -
vehicles with high-intensity
discharge headlamps.
Headlamp high beam.B
Daytime running lamp.
Front turn signal lamp.C
Headlamp Low Beam
1. Remove the cover.
2. Turn the bulb counterclockwise and
remove it.
3. Disconnect the electrical connector.
Note: Do not touch the bulb glass.
Note: You cannot separate the bulb from
the bulb holder.
Headlamp High Beam
1. Remove the cover.
2. Turn the bulb counterclockwise and
remove it.
3. Disconnect the electrical connector.
Note: Do not touch the bulb glass.
Note: You cannot separate the bulb from
the bulb holder.
High-Intensity Discharge
Headlamps
These lamps operate at a high voltage.
See an authorized dealer if they fail.
Daytime Running Lamp
1. Remove the cover.
2. Turn the bulb counterclockwise and
remove it.
3. Disconnect the electrical connector.
Note: Do not touch the bulb glass.
Note: You cannot separate the bulb from
the bulb holder.
CHANGING A FRONT TURN
SIGNAL LAMP BULB
E188959
C
Headlamp low beam.A
Headlamp low and high beam -
vehicles with high-intensity
discharge headlamps.
Headlamp high beam.B
Daytime running lamp.
Front turn signal lamp.C
1. Remove the headlamp assembly. See
Removing a Headlamp Assembly
(page 299).
300
2024 Edge (CDQ) Canada/United States of America, enUSA, Edition date: 202306, DOM
Maintenance
2. Turn the bulb holder counterclockwise
and remove it.
3. Remove the bulb by pulling it straight
out.
CHANGING A LICENSE PLATE
LAMP BULB
E72789
1. Use a suitable tool, for example a
screwdriver, to carefully remove the
lamp.
2. Remove the lamp.
3. Turn the bulb holder counterclockwise
and remove it.
4. Remove the bulb by pulling it straight
out.
INTERIOR BULBS
INTERIOR BULB SPECIFICATION
CHART
Your vehicle has LED lamps. These are not
serviceable items. See an authorized dealer
if they fail.
301
2024 Edge (CDQ) Canada/United States of America, enUSA, Edition date: 202306, DOM
Maintenance
CLEANING PRODUCTS
Materials
For best results, use the following products
or products of equivalent quality:
For additional information and assistance,
we recommend that you contact an
authorized dealer.
SpecificationName
Motorcraft® Bug and Tar Remover, ZC-42 (U.S. & Canada)
ESR-M5B194-BMotorcraft® Custom Bright Metal Cleaner, ZC-15 (U.S. & Canada)
ESR-M14P4-AMotorcraft® Detail Wash, ZC-3-A (U.S. & Canada)
ESR-M14P3-AMotorcraft® Engine Shampoo and Degreaser, ZC-20 (U.S.)
Motorcraft® Engine Shampoo, CXC-66-A (Canada)
Motorcraft® Premium Leather and Vinyl Cleaner, ZC-56 (U.S. &
Canada)
Motorcraft® Multi-Purpose Cleaner, CXC-101 (Canada)
WSS-M14P19-AMotorcraft® Premium Windshield Wash Concentrate with
Bitterant, ZC-32-B2 (U.S.)
WSS-M14P19-AMotorcraft® Premium Quality Windshield Washer Fluid, CXC-37-
F/M (Canada)
Motorcraft® Professional Strength Carpet & Upholstery Cleaner,
ZC-54 (U.S. & Canada)
ESR-M14P5-AMotorcraft® Premium Glass Cleaner, CXC-100 (Canada)
Motorcraft® Spot and Stain Remover, ZC-14 (U.S.)
ESR-M14P5-AMotorcraft® Ultra-Clear Spray Glass Cleaner, ZC-23 (U.S.)
Motorcraft® Wheel and Tire Cleaner, ZC-37-A (U.S. & Canada)
302
2024 Edge (CDQ) Canada/United States of America, enUSA, Edition date: 202306, DOM
Vehicle Care

Related Topics

Popular Owner Manuals