Maintenance
Note: Make sure that the wiper arm does
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
not spring back against the glass when the
wiper blade is not attached.
2. Slightly rotate the wiper blade.
3. Remove the wiper blade.
3. To install, reverse the removal
procedure.
Note: Make sure that the wiper blade locks
4. To install, reverse the removal
into place.
procedure.
Note: Make sure that the wiper blade locks
CHANGING A BULB
into place.
CHANGING THE REAR WIPER
BLADES
You can improve poor wiper quality by
cleaning the wiper blades and the
windshield.
WARNING: Switch the lamps and
the ignition off. Failure to do so could
result in serious personal injury.
WARNING:Bulbs can become hot.
Let the bulb cool down before removing
it. Failure to do so could result in
personal injury.
Replace the wiper blades at least annually
for optimum performance.
Use the correct specification bulb. See
Bulb Specification Chart (page 419).
Install in the reverse order unless otherwise
stated.
Rear Direction Indicator and
Reversing Lamp
E292168
1. Switch all of the lamps and the ignition
off.
E183236
2. Use a suitable tool, for example a
screwdriver, to carefully remove the
access cover.
1. Lift the wiper arm.
Note: Do not hold the wiper blade to lift the
3. Remove the side cover.
wiper arm.
4. Remove the screw that secures the
2. Remove the wiper blade.
lamp assembly.
341
Explorer (CTW), enUSA, Edition date: 202007, Second-Printing
