Keys and remote controls
GENERAL INFORMATION
ON RADIO FREQUENCIES
CAUTION
The radio frequency used by
your remote control can also be
used by other short distance radio
transmissions (e.g. amateur radios,
medical equipment, wireless
headphones, remote controls and
alarm systems). If the frequencies are
jammed, you will not be able to use
your remote control. You can lock
and unlock the doors with the key.
E72191
To programme a new remote
control:
• Turn the ignition key to position II
four times within six seconds.
• Switch off the ignition. A tone
sounds to indicate that it is now
possible to programme a new
remote control.
Note: You could unlock the doors if
you press the buttons on the remote
control unintentionally.
The operating range between your
remote control and your vehicle
varies depending on the
environment.
• Press any button on a new
remote control. A tone will sound
as confirmation. Repeat this last
step for all of your remote
controls, including the original.
PROGRAMMING THE
REMOTE CONTROL
• Switch the ignition back on or wait
for ten seconds without
programming another remote
control to end remote control
programming. Only the remote
controls which you have just
programmed are now able to lock
and unlock your vehicle.
A maximum of four remote controls
(including the ones supplied with the
vehicle) can be programmed.
27
Downloaded from m manuals search engine
English 