Lighting
CAUTION
1
2
5
Do not pull the bumper more
than 10 mm from its original
position.
6. Carefully pull the bumper towards
the front of the vehicle and
remove the screw.
7. Disconnect the electrical
connector and remove the
headlamp.
3
CAUTION
4
When fitting the headlamp, take
care not to damage the locating
points.
E90592
Note: When fitting the headlamp,
make sure that you fully engage the
headlamp in the fixing points.
5. Remove the screws.
3
CHANGING A BULB
WARNINGS
Switch the lights and the ignition
off.
Let the bulb cool down before
removing it.
CAUTIONS
Do not touch the glass of the
bulb.
E90593
Only fit bulbs of the correct
specification. See Bulb
specification chart (page 50).
45
Downloaded from m manuals search engine