Starting the engine
Position I
GENERAL INFORMATION
Steering unlocked. Ignition and all
main electrical circuits are disabled.
The ignition key should not be left in
this position for too long to avoid
discharging the battery.
General points on starting
If the battery has been disconnected
the vehicle may exhibit some unusual
driving characteristics for approx. 8
kilometres (5 miles) after
Positon II
reconnecting the battery.
Ignition switched on, all electrical
circuits operational. Warning and
indicator lamps illuminate. This is the
key position when driving, and must
also be selected when being towed.
This is because the engine
management system must realign
itself with the engine. Any unusual
driving characteristics during this
period may be disregarded.
Postion III
Starting the engine by
towing or pushing
Starter motor activated. Release the
key as soon as the engine starts.
WARNING
To prevent damage you must
not push or tow start your
vehicle. Use booster cables and a
booster battery. See Using
booster cables (page 125).
STARTING A PETROL
ENGINE
Note: You can only operate the
starter for a maximum of 30 seconds
at a time.
IGNITION SWITCH
Cold or hot engine
All vehicles
Ignition switch positions
Position 0
CAUTION
WARNING
When the temperature is below
-20ºC (-4ºF), switch the ignition
on for at least one second before
starting the engine. This will make
sure that the maximum fuel pressure
is established for starting the engine.
Never return the key to the 0
position when the vehicle is in
motion.
Ignition off. When the key is removed
from the ignition switch, the steering
column lock will be activated as soon
as the steering wheel is turned.
78
Downloaded from m manuals search engine
English 
