Telephone
Bond another Bluetooth
phone
Handling of phones
A phone can be connected to the
vehicle system by using either a
cradle connection or a Bluetooth
connection.
Note: Before another Bluetooth
phone can be bonded, the existing
active Bluetooth connection has to
be deactivated by the mobile phone.
On vehicles with a mobile phone
cradle, up to five Bluetooth phones
can be bonded to the vehicle system.
Bond a new Bluetooth phone as
described in the requirements for a
Bluetooth connection.
On vehicles without a mobile phone
cradle, up to six Bluetooth phones
can be bonded to the vehicle system.
Phones stored in the system are
accessible by using the phone list on
the audio or navigation unit.
Note: If there is an ongoing call
when the phone in use is selected as
the new active phone, the call is
transferred to the vehicle audio
system.
Note: If six (five Bluetooth phones
for cradle phone system) Bluetooth
phones have been bonded, one of
these has to be deleted in order to
bond a new phone.
Note: Even if connected to the car
system, your phone can still be used
in the usual way.
Cradle phone
With your phone fitted in the mobile
phone cradle this does not
automatically become the active
phone.
Requirements for Bluetooth
connection
The following are required before a
Bluetooth phone connection can be
made.
In these cases refer to Changing
the active phone in the
appropriate section which describes
the system fitted to your vehicle.
1. The Bluetooth feature must be
activated on the phone and on
the audio unit. For additional
information, refer to your phone
user guide
BLUETOOTH SETUP
Before you can use your telephone
with your vehicle it must be bonded
to the vehicle telephone system.
2. The private mode must not be
activated on the Bluetooth phone.
3. Search for audio device.
4. Select Ford Audio.
5. The Bluetooth PIN number 0000
must be entered on the phone
keypad.
142
Downloaded from m manuals search engine
English 