Vehicle battery
3. Connect the positive (+) terminal
of vehicle A with the positive (+)
terminal of vehicle B (cable C).
C
D
Positive connection cable
Negative connection cable
4. Connect the negative (-) terminal
of vehicle B to the turbocharger
of vehicle A (cable D).
Vehicles with a petrol engine
CAUTIONS
Do not connect to the
negative (–) terminal of the
flat battery.
To start the engine
1. Run the engine of vehicle B at
moderately high speed.
Make sure that the jump leads
are clear of any moving parts.
2. Start the engine of vehicle A.
3. Run both vehicles for a minimum
of three minutes before
disconnecting the leads.
1. Position the vehicles so that they
do not touch one another.
2. Switch off the engine and any
electrical equipment.
CAUTION
Do not switch on the headlamps
when disconnecting the cables.
The peak voltage could blow the
bulbs.
3. Connect the positive (+) terminal
of vehicle A with the positive (+)
terminal of vehicle B (cable C).
4. Connect the negative (-) terminal
of vehicle B to the engine block
or engine mount of vehicle A
(cable D), as far from the battery
as possible.
Disconnect the cables in the reverse
order.
Vehicles with a diesel engine
CAUTIONS
Do not connect to the
negative (–) terminal of the
flat battery.
Make sure that the jump leads
are clear of any moving parts.
1. Position the vehicles so that they
do not touch one another.
2. Switch off the engine and any
electrical equipment.
126
Downloaded from m manuals search engine
English 
