Audio System
3. Press and hold one of the preset
Alternative Frequencies
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been stored.
The audio unit will also mute
The majority of programs that broadcast
on the FM waveband have a program
identification code, it can be recognized by
audio units.
momentarily as confirmation.
When your vehicle moves from one
transmission area to another with the
alternative frequencies tuning switched
on, this function will search for the
strongest station signal.
You can repeat this on each waveband and
for each preset button.
Note: When you drive to another part of the
country, stations that broadcast on
alternative frequencies, and are stored on
preset buttons, may be updated with the
correct frequency and station name for that
area.
Under certain conditions, alternative
frequencies tuning may temporarily disrupt
normal reception.
When selected, the unit continually
evaluates signal strength and, if a better
signal becomes available, the unit will
switch to that alternative. It mutes while
it checks a list of alternative frequencies
and if necessary, it will search once across
the selected waveband for a genuine
alternative frequency.
Autostore Control
Note: This will store up to a maximum of
the 10 strongest signals available, either
from the AM or the FM waveband, and
overwrite the previously stored stations. You
can also store stations manually in the same
way as other wavebands.
It will restore radio reception when it finds
one or if one is not found, the unit will
return to the original stored frequency.
•
•
Press and hold the RADIO button.
When the search is complete, sound is
restored and the strongest signals are
stored on the autostore presets.
When selected, AF will be shown in the
display.
Automatic Volume Control
1. Press the MENU button.
2. Select Audio Settings.
When available, automatic volume control
adjusts the volume level to compensate
for engine noise and road speed noise.
3. Scroll to Alternat. freq. or Alt.
Frequency. and turn on or off with the
OK button.
1. Press the MENU button and
selectAudio Settings.
4. Press the MENU button to return.
2. Select Spd. Comp. Vol.
3. Use the left or right arrow button to
adjust the setting.
4. Press the OK button to confirm your
selection.
5. Press the MENU button to return.
253
Fiesta (CCT), enUSA, Second Printing
English 
