2009-2016 Ford Fiesta 4 Door Audio System User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio System for Your Ford Fiesta 4 Door Sixth Generation (2009-2016)

Audio System  
GENERAL INFORMATION  
Radio Frequencies and Reception Factors  
Radio reception factors  
Distance and Strength  
Terrain  
The further you travel away from an FM station, theweaker  
the signal and the weaker the reception.  
Hills, mountains, tall buildings, bridges, tunnels, freeway  
overpasses, parking garages, dense tree foliage and  
thunderstorms can interfere with the reception.  
Station overload  
When you pass near a radio transmission tower, a stronger  
signal can override a weaker signal and can cause interfer-  
ence in the audio system.  
MP3 and WMA Track and Folder  
Structure  
CD and CD Player Information  
Note: CD units play commercially pressed  
4.75-inch (12 centimeter) audio compact  
discs only. Due to technical incompatibility,  
certain recordable and re-recordable  
compact discs may not function correctly  
when used in Ford CD players.  
Audio systems capable of recognizing and  
playing MP3 and WMA individual tracks  
and folder structures work as follows:  
•
There are two different modes for MP3  
and WMA disc playback: MP3 and  
WMA track mode (system default) and  
MP3 and WMA folder mode.  
Note: Do not insert CDs with homemade  
paper (adhesive) labels into the CD player  
as the label may peel and cause the CD to  
become jammed. You should use a  
permanent felt tip marker rather than  
adhesive labels on your homemade CDs.  
Ballpoint pens may damage CDs. Please  
contact an authorized dealer for further  
information.  
•
MP3 and WMA track mode ignores any  
folder structure on the MP3 and WMA  
disc. The player numbers each MP3  
and WMA track on the disc (noted by  
the MP3 or WMA file extension) from  
T001 to a maximum of T255. The  
maximumnumberofplayableMP3and  
WMA files may be less depending on  
the structure of the CD and exact  
model of radio present.  
Note: Do not use any irregularly shaped  
discs or discs with a scratch protection film  
attached.  
Always handle discs by their edges only.  
Clean the disc with an approved CD  
cleaner only. Wipe it from the center of the  
disc toward the edge. Do not clean in a  
circular motion.  
Do not expose discs to direct sunlight or  
heat sources for extended periods.  
245  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
•
MP3 and WMA folder mode represents  
In track mode, the system displays and  
plays the structure as if it were only one  
level deep (all MP3 and WMA files play,  
regardless of being in a specific folder). In  
folder mode, the system only plays the  
MP3 and WMA files in the current folder.  
a folder structure consisting of one  
level of folders. The CD player numbers  
all MP3 and WMA tracks on the disc  
(noted by the MP3 or WMA file  
extension) and all folders containing  
MP3 and WMA files, from F001 (folder)  
T001 (track) to F253 T255.  
AUDIOUNIT-VEHICLESWITH:  
AM/FM/CD  
•
Creating discs with only one level of  
folders helps with navigation through  
the disc files.  
WARNING  
If you are burning your own MP3 and WMA  
discs, it is important to understand how  
the system reads the structures you create.  
While various files may be present, (files  
with extensions other than MP3 and  
WMA), only files with the MP3 and WMA  
extension are played; other files are  
ignored by the system. This enables you to  
use the same MP3 and WMA disc for a  
variety of tasks on your work computer,  
home computer and your in-vehicle  
system.  
Driving while distracted can result in  
loss of vehicle control, crash and  
injury. We strongly recommend that  
you use extreme caution when using any  
device that may take your focus off the  
road. Your primary responsibility is the safe  
operation of your vehicle. We recommend  
against the use of any hand-held device  
while driving and encourage the use of  
voice-operated systems when possible.  
Make sure you are aware of all applicable  
local laws that may affect the use of  
electronic devices while driving.  
246  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
A
B
D
E
C
F
O
N
M
L
G
K
J
I
H
E156613  
A
B
C
D
E
Eject: Press the button to eject a CD.  
Cursor arrows: Press a button to scroll through on-screen choices.  
CD slot: Where you insert a CD.  
OK: Press the button to confirm on-screen selections.  
Clock: Press to set the time. Use the H and M buttons outside the audio display  
to adjust the hours and minutes. Press OK to finish. (The clock can also be set  
by pressing MENU, then scrolling to the clock settings menu.)  
F
Tune: Press the button to manual tune on AM and FM wavebands.  
G
Numeric keypad: Press the button to recall a previously stored station. To  
store a favorite station press and hold until the sound returns.  
H
I
Seek up: Press the button to go to the next station up the radio frequency band  
or the next track on a CD.  
On, Off and Volume: Press the button to switch the audio system on or off.  
Turn the dial to adjust the volume.  
247  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
J
Seek down: Press the button to go to the next station down the radio frequency  
band or the previous track on a CD.  
K
L
MENU: Press the button to access different audio system features.  
INFO: Press the button to access radio or CD information.  
M
SOUND: Press the button to adjust the sound settings for bass, treble, middle,  
balance and fade.  
N
O
MEDIA: Press the button to access the AUX and SYNC features, it will also  
cancel the menu or list browsing.  
RADIO: Press the button to select different radio bands, it will also cancel the  
menu or list browsing.  
Station Tuning Control  
Sound Button  
Seek Tuning  
This will allow you to adjust the sound  
settings (for example bass, middle and  
treble).  
Select a waveband and briefly press one  
of the seek buttons. The unit will stop at  
the first station it finds in the direction you  
have chosen.  
1. Press the SOUND button.  
2. Use the up and down arrow buttons to  
select the required setting.  
Manual Tuning  
3. Use the left and right arrow buttons to  
make the necessary adjustment. The  
display indicates the level selected.  
1. Press the MENU button.  
2. SelectRADIO mode and thenManual.  
3. Use the left and right arrow buttons to  
tune down or up the waveband in small  
increments or press and hold to  
increment quickly, until you find a  
station you want to listen to.  
4. Press the OK button to confirm the  
new settings.  
Waveband Button  
Press the RADIO button to select from the  
wavebands available.  
4. Press OK to continue listening to a  
station.  
You can use the selector to return to radio  
reception when you have been listening to  
another source.  
Scan Tuning  
Scan allows you to listen to a few seconds  
of each station detected.  
Alternatively, press the left arrow button  
to display the available wavebands. Scroll  
to the required waveband and press OK.  
1. Press the MENU button.  
2. Select RADIO mode and then Scan.  
3. Use the seek buttons to scan up or  
down the selected waveband.  
4. Press OK to continue listening to a  
station.  
248  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
3. Use the left or right arrow button to  
Station Preset Buttons  
adjust the setting.  
This feature allows you to store your  
favorite stations, they can be recalled by  
selecting the appropriate waveband and  
pressing one of the preset buttons.  
4. Press the OK button to confirm your  
selection.  
5. Press the MENU button to return.  
1. Select a waveband.  
Alternative Frequencies  
2. Tune to the station required.  
The majority of programs that broadcast  
on the FM waveband have a program  
identification code that can be recognized  
by audio units.  
3. Press and hold one of the preset  
buttons. A progress bar and message  
will appear. When the progress bar  
completes the station has been stored.  
The audio unit will also mute  
When your vehicle moves from one  
transmission area to another with the  
alternative frequencies tuning switched  
on, this function will search for the  
strongest station signal.  
momentarily as confirmation.  
You can repeat this on each waveband and  
for each preset button.  
Note: When you drive to another part of the  
country, stations that broadcast on  
alternative frequencies and are stored on  
preset buttons, may be updated with the  
correct frequency and station name for that  
area.  
Under certain conditions, alternative  
frequencies tuning may temporarily disrupt  
normal reception.  
When selected, the unit continually  
evaluates signal strength and if a better  
signal becomes available, the unit will  
switch to that alternative. It mutes while  
it checks a list of alternative frequencies  
and if necessary, it will search once across  
the selected waveband for a genuine  
alternative frequency.  
Autostore Control  
Note: This will store up to a maximum of  
the six strongest signals available, either  
from the AM or the FM waveband and  
overwrite the previously stored stations. You  
can also store stations manually in the same  
way as other wavebands.  
It will restore radio reception when it finds  
one or if one is not found, the unit will  
return to the original stored frequency.  
•
•
Press and hold the RADIO button.  
When selected, AF will be shown in the  
display.  
When the search is complete, sound is  
restored and the strongest signals are  
stored on the autostore presets.  
1. Press the MENU button.  
2. Select Audio Settings.  
Automatic Volume Control  
3. Scroll to Alternat. freq. or Alt.  
Frequency and turn on or off with the  
OK button.  
When available, automatic volume control  
adjusts the volume level to compensate  
for engine noise and road speed noise.  
4. Press the MENU button to return.  
1. Press the MENU button and select  
Audio Settings.  
2. Select Spd. Comp. Vol.  
249  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
Note: An integrated multi function display  
AUDIOUNIT-VEHICLESWITH:  
SYNC/AM/FM/CD  
is situated above the unit. This shows  
important information regarding control of  
your system. Additionally, there are various  
icons placed around the display screen  
which light up when a function is active, for  
example CD, Radio or Aux.  
WARNING  
Driving while distracted can result in  
loss of vehicle control, crash and  
injury. We strongly recommend that  
you use extreme caution when using any  
device that may take your focus off the  
road. Your primary responsibility is the safe  
operation of your vehicle. We recommend  
against the use of any hand-held device  
while driving and encourage the use of  
voice-operated systems when possible.  
Make sure you are aware of all applicable  
local laws that may affect the use of  
electronic devices while driving.  
A
B
D
E
C
U
T
F
G
S
R
H
I
Q
P
O
N
M
L
K
J
E156629  
250  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
A
B
C
D
E
Eject: Press the button to eject a CD.  
Cursor arrows: Press a button to scroll through on-screen choices.  
CD slot: Where you insert a CD.  
OK: Press the button to confirm on-screen selections.  
INFO: Press the button to access radio, CD, USB and IPod information.  
TUNE -: Press the button to manual tune down the waveband.  
TUNE +: Press the button to manual tune up the waveband.  
F
G
H
Numeric keypad: Press the button to recall a previously stored station. To  
store a favorite station press and hold until the sound returns.  
I
Clock: Press the button to set the clock, except when in phone mode.  
J
Function button 4: Press the button to select different functions of the audio  
system depending on which mode (i.e. radio or CD) you are in.  
K
L
Function button 3: Press the button to select different functions of the audio  
system depending on which mode (i.e. radio or CD) you are in.  
Seek up: Press the button to go to the next station up the radio frequency band  
or the next track on a CD.  
M
N
O
P
On, Off and Volume: Press the button to switch the audio system on or off.  
Turn the dial to adjust the volume.  
Seek down: Press the button to go to the next station down the radio frequency  
band or the previous track on a CD.  
Function button 2: Press the button to select different functions of the audio  
system depending on which mode (i.e. radio or CD) you are in.  
Function button 1: Press the button to select different functions of the audio  
system depending on which mode (i.e. radio or CD) you are in.  
Q
R
MENU: Press the button to access different audio system features.  
SOUND: Press the button to adjust the sound settings for bass, treble, middle,  
balance and fade.  
S
T
U
PHONE: Press the button to access the phone feature of the SYNC system by  
pressing PHONE then MENU. See separate manual.  
MEDIA: Press the button to access the AUX and SYNC features, it will also  
cancel the menu or list browsing.  
RADIO: Press the button to select different radio bands, it will also cancel the  
menu or list browsing.  
251  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
You can use the selector to return to radio  
reception when you have been listening to  
another source.  
Alternatively, press the left arrow button  
to display the available wavebands. Scroll  
to the required waveband and press OK.  
Station Tuning Control  
Seek Tuning  
Select a waveband and briefly press one  
of the seek buttons. The unit will stop at  
the first station it finds in the direction you  
have chosen.  
1
2
3
4
Manual Tuning  
A
E104157  
1. Press function button 2.  
2. Use the left and right arrow buttons to  
tune down or up the waveband in small  
increments or press and hold to  
increment quickly, until you find a  
station you want to listen to.  
A
Descriptions for function buttons  
1-4  
Function buttons 1 to 4 are context  
dependent, and change according to the  
current unit mode. The description for the  
current function displays in the screen.  
3. Press OK to continue listening to a  
station.  
Scan Tuning  
Sound Button  
Scan allows you to listen to a few seconds  
of each station detected.  
This will allow you to adjust the sound  
settings (for example bass, middle and  
treble).  
1. Press function button 3.  
2. Use the seek buttons to scan up or  
down the selected waveband.  
1. Press the SOUND button.  
2. Use the up and down arrow buttons to  
select the required setting.  
3. Press function button 3 again or OK  
to continue listening to a station.  
3. Use the left and right arrow buttons to  
make the necessary adjustment. The  
display indicates the level selected.  
Station Preset Buttons  
This feature allows you to store your  
favorite stations, they can be recalled by  
selecting the appropriate waveband and  
pressing one of the preset buttons.  
4. Press the OK button to confirm the  
new settings.  
Waveband Button  
1. Select a waveband.  
Press the RADIO button to select from the  
2. Tune to the station required.  
wavebands available.  
252  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
3. Press and hold one of the preset  
Alternative Frequencies  
buttons. A progress bar and message  
will appear. When the progress bar  
completes the station has been stored.  
The audio unit will also mute  
The majority of programs that broadcast  
on the FM waveband have a program  
identification code, it can be recognized by  
audio units.  
momentarily as confirmation.  
When your vehicle moves from one  
transmission area to another with the  
alternative frequencies tuning switched  
on, this function will search for the  
strongest station signal.  
You can repeat this on each waveband and  
for each preset button.  
Note: When you drive to another part of the  
country, stations that broadcast on  
alternative frequencies, and are stored on  
preset buttons, may be updated with the  
correct frequency and station name for that  
area.  
Under certain conditions, alternative  
frequencies tuning may temporarily disrupt  
normal reception.  
When selected, the unit continually  
evaluates signal strength and, if a better  
signal becomes available, the unit will  
switch to that alternative. It mutes while  
it checks a list of alternative frequencies  
and if necessary, it will search once across  
the selected waveband for a genuine  
alternative frequency.  
Autostore Control  
Note: This will store up to a maximum of  
the 10 strongest signals available, either  
from the AM or the FM waveband, and  
overwrite the previously stored stations. You  
can also store stations manually in the same  
way as other wavebands.  
It will restore radio reception when it finds  
one or if one is not found, the unit will  
return to the original stored frequency.  
•
•
Press and hold the RADIO button.  
When the search is complete, sound is  
restored and the strongest signals are  
stored on the autostore presets.  
When selected, AF will be shown in the  
display.  
Automatic Volume Control  
1. Press the MENU button.  
2. Select Audio Settings.  
When available, automatic volume control  
adjusts the volume level to compensate  
for engine noise and road speed noise.  
3. Scroll to Alternat. freq. or Alt.  
Frequency. and turn on or off with the  
OK button.  
1. Press the MENU button and  
selectAudio Settings.  
4. Press the MENU button to return.  
2. Select Spd. Comp. Vol.  
3. Use the left or right arrow button to  
adjust the setting.  
4. Press the OK button to confirm your  
selection.  
5. Press the MENU button to return.  
253  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
Note: MyFord Touch controls most of the  
audio features. See MyFord Touch™ (page  
306).  
AUDIOUNIT-VEHICLESWITH:  
TOUCHSCREEN DISPLAY  
WARNING  
Driving while distracted can result in  
loss of vehicle control, crash and  
injury. We strongly recommend that  
you use extreme caution when using any  
device that may take your focus off the  
road. Your primary responsibility is the safe  
operation of your vehicle. We recommend  
against the use of any hand-held device  
while driving and encourage the use of  
voice-operated systems when possible.  
Make sure you are aware of all applicable  
local laws that may affect the use of  
electronic devices while driving.  
A
B
C
D
G
F
E
E156662  
A
TUNE: Press these buttons when in radio mode to manually search up or down  
through the radio frequency band. In SIRIUS mode, press these buttons to find  
the next or previous available satellite radio station.  
B
C
Eject: Press the button to eject a CD.  
DISP: Press the button to turn the display into idle mode.  
254  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
D
SEEK: Press these buttons when you are in radio mode to go to the next station  
up or down the radio frequency band, or to go to the next or previous track on  
a CD. In SIRIUS mode, press these buttons to select the next or previous channel.  
If a specific category is selected (for example Jazz, Rock or News), use these  
buttons to find the next or previous channel in the selected category.  
E
F
SOUND: Press the button to adjust the sound settings for bass, treble, middle,  
balance and fade.  
On, Off and Volume: Press the button to switch the audio system on or off.  
Turn the dial to adjust the volume.  
G
SOURCE: Press the button to access different audio modes, for example AM,  
FM, Satellite radio and A/V input.  
Note: MyFord Touch controls most of the  
audio features. See MyFord Touch™ (page  
306).  
AUDIOUNIT-VEHICLESWITH:  
TOUCHSCREEN DISPLAY/  
SONY AUDIO SYSTEM  
WARNING  
Driving while distracted can result in  
loss of vehicle control, crash and  
injury. We strongly recommend that  
you use extreme caution when using any  
device that may take your focus off the  
road. Your primary responsibility is the safe  
operation of your vehicle. We recommend  
against the use of any hand-held device  
while driving and encourage the use of  
voice-operated systems when possible.  
Make sure you are aware of all applicable  
local laws that may affect the use of  
electronic devices while driving.  
255  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
D
A
B
C
E
J
I
H
G
F
E156663  
A
B
C
On, Off: Press the button to switch the audio system on or off.  
CD Slot Where you insert a CD.  
TUNE +: In radio mode, press this button to manually search forward through  
the radio frequency band. In SIRIUS mode, press this button to find the next  
available satellite radio station.  
D
Seek up In radio mode, press this button to go to the next station up the radio  
frequency band. Press to go to the next track on a CD. In SIRIUS mode, press  
this button to select the next channel. If a specific category is selected (for  
example Jazz, Rock or News), use this button to find the next channel in the  
selected category.  
E
F
Eject: Press the button to eject a CD.  
SOUND: Press the button to adjust the sound settings for bass, treble, middle,  
balance and fade.  
G
Volume Turn the dial to adjust the volume.  
256  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
H
I
TUNE -: In radio mode, press this button to manually search backward through  
the radio frequency band. In SIRIUS mode, press this button to find the previous  
available satellite radio station.  
Seek down In radio mode, press this button to go to the next station down the  
radio frequency band. Press to go to the previous track on a CD. In SIRIUS mode,  
press this button to select the previous channel. If a specific category is selected  
(for example Jazz, Rock or News), use this button to find the previous channel  
in the selected category.  
J
SOURCE: Press the button to access different audio modes, for example AM,  
FM, Satellite radio and A/V input.  
The multicast indicator appears in FM  
mode (only) if the current station is  
DIGITAL RADIO  
broadcasting multiple digital broadcasts.  
The highlighted numbers signify available  
digital channels where new or different  
content is available. HD1 signifies the main  
programming status and is available in  
analog and digital broadcasts. Other  
multicast stations (HD2 through HD7) are  
only available digitally.  
Note: HD Radio broadcasts are not  
available in all markets.  
HD Radio technology is the digital  
evolution of analog AM/FM radio. Your  
system has a special receiver that allows  
it to receive digital broadcasts (where  
available) in addition to the analog  
broadcasts, it already receives. Digital  
broadcasts provide a better sound quality  
than analog broadcasts with free,  
crystal-clear audio and no static or  
distortion. For more information, and a  
guide to available stations and  
When HD Radio broadcasts are active, you  
can access the following functions:  
When HD Radio broadcasts are active, you  
can access the following functions:  
•
Scan allows you to hear a brief  
sampling of all available stations. This  
feature still works when HD Radio  
reception is on, although it does not  
scan for HD2-HD7 channels. You may  
see the HD logo appear if the station  
has a digital broadcast.  
programming, please visit  
www.hdradio.com.  
When HD Radio is on and you tune to a  
station broadcasting HD Radio technology,  
you may notice the HD Radio logo on your  
screen. When this logo is available, you  
may also see Title and Artist fields  
on-screen.  
•
Memory presets allow you to save an  
active channel as a memory preset.  
Touch and hold a memory preset slot  
until the sound returns. There is a brief  
mute while the radio saves the station.  
Sound returns when finished. When  
switching to an HD2 or HD3 memory  
preset, the sound mutes before the  
digital audio plays, because the system  
has to reacquire the digital signal.  
257  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
Note: As with any saved radio station, you  
cannot access the saved station if your  
vehicle is outside the station’s reception  
area.  
HD Radio Reception and Station Troubleshooting  
Potential reception issues  
Reception area  
If you are listening to a multicast station and you are on  
the fringe of the reception area, the station may mute due  
to weak signal strength.  
If you are listening to HD1, the system switches back to  
the analog broadcast until the digital broadcast isavailable  
again. However, if you are listening to any of the possible  
HD2-HD7 multicast channels, the station mutes and stays  
muted unless it is able to connect to the digital signal  
again.  
Station blending  
When the system first receives a station (aside from HD2-  
HD7 multicast stations), it first plays the station in the  
analog version. Once the receiver verifies the station is an  
HD Radio station, it shifts to the digital version. Depending  
on the station quality, you may hear a slight sound change  
when the station changes from analog to digital. Blending  
is the shift from analog to digital sound or digital back to  
analog sound.  
In order to provide the best possible  
experience, use the contact form to report  
any station issues found while listening to  
a station broadcasting with HD Radio  
technology. Independent entities own and  
operate each station. These stations are  
responsible for ensuring all audio streams  
and data fields are accurate.  
258  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
Potential station issues  
Cause  
Issues  
Action  
Echo, stutter, skip or repeat This is poor time alignment No action required. This is a  
in audio.  
by the radio broadcaster.  
broadcast issue.  
Increase or decrease in  
audio volume.  
Sound fading or blending in The radio is shifting between No action required. The  
and out.  
analog and digital audio.  
reception issue may clear up  
as you continue to drive.  
There is an audio mute  
The digital multicast is not No action required. This is  
delay when selecting HD2 or available until the HD Radio normal behavior. Wait until  
HD3, multicast preset or  
broadcast is decoded. Once the audio is available.  
Direct Tune.  
decoded, the audio is avail-  
able.  
Cannot access HD2 or HD3 The previously stored  
multicast channel when multicast preset or direct  
No action required. The  
station is not available in  
recalling a preset or from a tune is not available in your your current location.  
direct tune.  
current reception area.  
Text information does not  
match currently playing  
audio.  
Data service issue by the  
radio broadcaster.  
Fill out the station issue  
form at website listed  
below.*  
There is no text information Data service issue by the  
shown for currently selected radio broadcaster.  
frequency.  
Fill out the station issue  
form at website listed  
below.*  
HD2-HD7 stations not found Pressing Scan disables  
No action required. This is  
normal behavior.  
when Scan is pressed.  
HD2-HD7 channel search.  
* http://www.ibiquity.com/automotive/report_radio_station_experiences  
HD Radio Technology manufactured under  
license from iBiquity Digital Corp. U.S. and  
SATELLITE RADIO  
foreign patents. HD Radio and the HD and  
HD Radio logos are proprietary trademarks  
of iBiquity Digital Corp. Ford Motor  
Company and iBiquity Digital Corp. are not  
responsible for the content sent using HD  
Radio technology. Content may be  
changed, added or deleted at any time at  
the station owner's discretion.  
SIRIUS® broadcasts a variety of music,  
news, sports, weather, traffic and  
entertainment satellite radio channels. For  
more information and a complete list of  
SIRIUS satellite radio channels, visit  
www.siriusxm.com in the United States,  
www.sirius.ca in Canada, or call SIRIUS at  
1-888-539-7474.  
259  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
Note: This receiver includes the eCos  
real-time operating system. eCos is  
published under the eCos License.  
Satellite Radio Reception Factors  
Potential satellite radio reception issues  
Antenna obstructions  
Terrain  
For optimal reception performance, keep the antenna  
clear of snow and ice build-up and keep luggage and other  
material as far away from the antenna as possible.  
Hills, mountains, tall buildings, bridges, tunnels, freeway  
overpasses, parking garages, dense tree foliage and  
thunderstorms can interfere with your reception.  
Station overload  
When you pass a ground-based broadcast-repeating  
tower, a stronger signal may overtake a weaker one and  
the audio system may mute.  
Satellite radio signal interfer- Your display may show ACQUIRING . . . to indicate the  
ence  
interference and the audio system may mute.  
SIRIUS satellite radio is a  
SIRIUS® Satellite Radio Service  
subscription-based satellite radio service  
that broadcasts a variety of music, sports,  
news, weather, traffic and entertainment  
programming. Your factory-installed  
SIRIUS satellite radio system includes  
hardware and a limited subscription term,  
which begins on the date of sale or lease  
of your vehicle. See an authorized dealer  
for availability.  
Note: SIRIUS reserves the unrestricted right  
to change, rearrange, add or delete  
programming including canceling, moving  
or adding particular channels, and its prices,  
at any time, with or without notice to you.  
Ford Motor Company shall not be  
responsible for any such programming  
changes.  
For more information on extended  
subscription terms (a service fee is  
required), the online media player and a  
complete list of SIRIUS satellite radio  
channels, and other features, please visit  
www.siriusxm.com in the United States,  
www.sirius.ca in Canada, or call SIRIUS at  
1-888-539-7474.  
E142593  
Satellite Radio Electronic Serial  
Number (ESN)  
You need your ESN to activate, modify or  
track your satellite radio account. When in  
satellite radio mode, press Options.  
260  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
Troubleshooting  
Message  
Condition  
Action  
Acquiring…  
Radio requires more than  
two seconds to produce  
audio for the selected  
channel.  
No action required. This  
message should disappear  
shortly.  
Satellite antenna fault  
SIRIUS system failure  
There is an internal module If this message does not  
or system failure present.  
clear shortly, or with an igni-  
tion key cycle, your receiver  
may have a fault. See an  
authorized dealer for service.  
Invalid Channel  
The channel is no longer  
available.  
Tune to another channel or  
choose another preset.  
Unsubscribed Channel  
Your subscription does not Contact SIRIUS at 1-888-  
include this channel.  
539-7474 to subscribe to  
the channel, or tune to  
another channel.  
No Signal  
The signal is lost from the  
SIRIUS satellite or SIRIUS  
tower to your vehicle  
antenna.  
The signal is blocked. When  
you move into an open area,  
the signal should return.  
Updating…  
Update of channel  
programming in progress.  
No action required. The  
process may take up to  
three minutes.  
Questions? Call  
1-888-539-7474  
Your satellite service is no  
longer available.  
Contact SIRIUS at 1-888-  
539-7474 to resolve  
subscription issues.  
None found  
All the channels in the  
Use the channel guide to  
selected category are either turn off the Lock or Skip  
Check Channel Guide  
skipped or locked.  
function on that station.  
Subscription Updated  
SIRIUS has updated the  
channels available for your  
vehicle.  
No action required.  
261  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
The auxiliary input jack allows you to  
AUDIO INPUT JACK  
connect and play music from your portable  
music player through your vehicle speakers.  
You can use any portable music player  
designed for use with headphones. Your  
audio extension cable must have male  
1/8th-inch (3.5 millimeter) connectors at  
each end.  
WARNINGS  
Driving while distracted can result in  
loss of vehicle control, crash and  
injury. We strongly recommend that  
you use extreme caution when using any  
device that may take your focus off the  
road. Your primary responsibility is the safe  
operation of your vehicle. We recommend  
against the use of any hand-held device  
while driving and encourage the use of  
voice-operated systems when possible.  
Make sure you are aware of all applicable  
local laws that may affect the use of  
electronic devices while driving.  
1. Switch off the engine, radio and  
portable music player. Set the parking  
brake and put the transmission in  
position P (vehicle with an automatic  
transmission) or neutral (vehicle with  
a manual transmission).  
2. Plug the extension cable from the  
portable music player into the auxiliary  
input jack.  
For safety reasons, do not connect  
or adjust the settings on your  
portable music player while your  
vehicle is moving.  
3. Switch the radio on. Select either a  
tuned FM station or a CD.  
4. Adjust the volume as desired.  
Store the portable music player in a  
secure location, such as the center  
console or the glove box, when your  
vehicle is moving. Hard objects may  
become projectiles in a collision or sudden  
stop, which may increase the risk of serious  
injury. The audio extension cable must be  
long enough to allow the portable music  
player to be safely stored while your  
vehicle is moving.  
5. Switch your portable music player on  
and adjust its volume to half its  
maximum level.  
6. Press AUX until LINE or LINE IN  
appears in the display. You should hear  
music from your device even if it is low.  
7. Adjust the volume on your portable  
music player until it reaches the volume  
level of the FM station or CD. Do this  
by switching back and forth between  
the AUX and FM or CD controls.  
E149149  
262  
Fiesta (CCT), enUSA, Second Printing  
Audio System  
USB PORT (If Equipped)  
A
B
C
E170492  
A
B
Line in  
E149148  
USB ports  
SD card slot  
The USB port allows you to plug in media  
playing devices, memory sticks and charge  
devices (if supported).  
C
See Entertainment (page 327).  
MEDIA HUB (If Equipped)  
The media hub is located in a  
compartment inside the center console.  
AUDIO TROUBLESHOOTING  
Audio unit display  
Rectification  
Please check CD  
General error message for CD fault conditions, for  
example cannot read the CD, data-CD inserted, etc.  
Make sure the disc is loaded correctly. Clean and re-try,  
or replace disc with known music disc. If error persists  
contact an authorized dealer.  
CD drive malfunction  
CD drive high temp.  
General error message for CD fault conditions. For  
example a mechanism fault.  
Ambient temperature too hot – unit will not work until  
it has cooled down.  
263  
Fiesta (CCT), enUSA, Second Printing  

Related Topics

General Information Audio Unit - Vehicles With: AM/FM/CD Audio Unit - Vehicles With: SYNC/AM/FM/CD Audio Unit - Vehicles With: Touchscreen Display/Sony Audio System Digital Radio Satellite Radio Audio Input Jack USB Port Media Hub Audio Troubleshooting

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot