Locks
Note: If a second valid passive key is
Disabled Keys
located within the liftgate detection range,
the liftgate can be closed.
Any keys left inside your vehicle interior
when it is locked will be disabled.
Unlocking Your Vehicle
You cannot use a disabled key to switch
the ignition on or start the engine.
Note: When your vehicle remains locked
for longer than three days, the system will
enter an energy-saving mode. This is to
prevent your vehicle battery running out of
charge. When your vehicle is unlocked while
in this mode, the reaction time of the system
may be a little longer than normal. To exit
the energy-saving mode, unlock your
vehicle.
You must enable all passive keys again in
order to use them.
To enable all your passive keys, unlock your
vehicle using a passive key or the remote
control unlocking function.
All passive keys will then be enabled if you
switch the ignition on or you start your
vehicle with a valid key.
Locking and Unlocking the Doors
With the Key Blade
2
E87384
1
Press a locking button once.
Note: A valid passive key must be located
within the detection range of that door.
One long flash of the direction indicators
confirms that all the doors and the liftgate
have been unlocked and that the alarm
has been disarmed.
1
E87964
1. Carefully remove the cover.
Unlocking Only the Driver Door
2. Remove the key blade and insert it into
the lock.
If the unlocking function is reprogrammed
so that only the driver door and the liftgate
are unlocked. See Remote Control (page
42). Note the following:
Note: Only the driver door handle has a lock
cylinder.
If the driver door is the first door which is
opened, the other doors will remain locked.
All the other doors can be unlocked from
inside your vehicle by pressing the unlock
button on the instrument panel.
56
Fiesta (CCT), enUSA, Second Printing
English 
