Cruise Control
The indicator appears in the
information display.
PRINCIPLE OF OPERATION
E71340
Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal. You can use cruise
control when your vehicle speed is greater
than 20 mph (30 km/h).
Setting the Cruise Speed
1. Drive to desired speed.
2. Press and release SET+.
3. Take your foot off the accelerator
USING CRUISE CONTROL
pedal.
Note: The indicator will change color.
WARNINGS
Do not use cruise control on winding
roads, in heavy traffic or when the
road surface is slippery. This could
result in loss of vehicle control, serious
injury or death.
Changing the Set Speed
Note: If you accelerate by pressing the
accelerator pedal, the set speed will not
change. When you release the accelerator
pedal, your vehicle returns to the speed that
you previously set.
When you are going downhill, your
vehicle speed could increase above
the set speed. The system does not
apply the brakes.
•
Press and release SET+ or SET-. When
you select km/h as the display
measurement in the Information
display the set speed changes in
approximately 2 km/h increments.
When you select mph as the display
measurement in the information
display the set speed changes in
approximately 1 mph increments.
Note: Cruise control disengages if the
vehicle speed decreases more than 10 mph
(16 km/h) below the set speed when driving
uphill.
•
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release SET+.
Press and hold SET+ or SET-. Release
the control when you reach the desired
speed.
Canceling the Set Speed
Press and release CAN or tap the brake
pedal. The set speed does not erase.
E144500
The cruise controls are on the steering
wheel.
Resuming the Set Speed
Press and release RES.
Switching Cruise Control On
Press and release ON.
Switching Cruise Control Off
Note: You erase the set speed when you
switch the system off.
162
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
