Get MyKey -> Creating a MyKey Guide for Ford Focus 4 Door Third generation(2010-2017)

MyKey™

•

Various vehicle speed minders can be

CREATING A MYKEY

set. Once you select a speed, it will be

shown in the display, followed by an

audible tone when the preselected

vehicle speed is exceeded.

Use the information display to create a

MyKey:

1. Insert the key you want to program into

the ignition. If your vehicle is equipped

with a push-button start, place the

intelligent access transmitter into the

backup position. The location of your

backup position is in another chapter.

See Starting and Stopping the

Engine (page 118).

Audio system maximum volume of

45%. A message will be shown in the

display when you attempt to exceed

the limited volume. Also, the

speed-sensitive or compensated

automatic volume control will be

disabled.

Always on setting. When this is

selected, you will not be able to turn

off AdvanceTrac or traction control,

E911 or Emergency Assist, or the Do Not

Disturb feature (if your vehicle is

equipped with these features).

•

2. Switch the vehicle on.

3. Access the main menu through the

information display controls. Use the

arrow keys to get to the following menu

selections:

Message

Action and Description

Settings

Press the OK button or the right arrow key.

MyKey

Create MyKey

Programming/Changing

Configurable Settings

Use the information display to access your

configurable MyKey settings by doing the

following:

When prompted, hold the OK button until

you see a message informing you to label

this key as a MyKey. The key will be

restricted at the next start.

MyKey is successfully created. Make sure

you label it so you can distinguish it from

the admin keys.

You can also program configurable

settings for the key(s). See

Programming/Changing Configurable

Settings.

1. Switch the vehicle on using an admin

key.

2. Use the arrow keys to get to the

following menu selections:

Message

Settings

Action and Description

Press the OK button or the right arrow key.

MyKey

Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing

MyKey™

Note: You can clear or change your MyKey

CLEARING ALL MYKEYS

You can clear or change your MyKey

settings using the information display

control on the steering wheel. See

Information Displays (page 91).

settings at any time during the same key

cycle as you created the MyKey. Once you

have switched the vehicle off, however, you

will need an admin key to change or clear

your MyKey settings.

Note: When you make any changes to your

MyKey settings, you change the settings for

every MyKey. You cannot make individual

changes to apply to certain MyKeys.

Switch the ignition on using an admin key.

To clear all MyKeys of all MyKey settings, press the left arrow button to access

the main menu and scroll to:

Message

Action and Description

Press the OK button or the right arrow button.

Settings

MyKey

Clear MyKey

Press and hold the OK button until the instrument cluster

displays the following message.

All MyKeys

Cleared

Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to

their original admin key status.

Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing

MyKey -> Creating a MyKey for Your Ford Focus 4 Door Third generation(2010-2017)

Related Topics

MyKey