Get Seats -> Head Restraints Guide for Ford Focus 4 Door Third generation(2010-2017)

Seats

Rear center head restraint

WARNINGS

The adjustable head restraint is a

safety device. Whenever possible, it

should be installed and properly

adjusted when the seat is occupied. Failure

to adjust the head restraint properly could

reduce its effectiveness during certain

impacts.

Install the head restraint properly to

help minimize the risk of neck injury

in the event of a crash.

E198013

Note: Adjust the seatback to an upright

driving position before adjusting the head

restraint. Adjust the head restraint so that

the top of it is level with the top of your head

and as far forward as possible. Make sure

that you remain comfortable. If you are

extremely tall, adjust the head restraint to

its highest position.

The head restraints consist of:

A

An energy absorbing head

restraint.

Two steel stems.

B

C

Guide sleeve adjust and release

button.

Frontseatandrearseatoutboardhead

D

Guide sleeve unlock and remove

button.

restraints

Adjusting the Head Restraint

Raising the Head Restraint

Pull the head restraint up.

Lowering the Head Restraint

1. Press and hold button C.

2. Push the head restraint down.

E138642

Removing the Head Restraint

1. Pull the head restraint up until it

reaches its highest position.

2. Press and hold buttons C and D.

3. Pull the head restraint up.

Note: For the front head restraints, you may

need to use a key or similar object to release

the head restraint. Press the key into the

guide sleeve unlock and remove button to

release the head restraint.

111

Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing

Seats

Installing the Head Restraint

Align the steel stems into the guide sleeves

and push the head restraint down until it

locks.

WARNINGS

Rock the seat backward and forward

after releasing the lever to make sure

that it is fully engaged.

Tilting Head Restraints (If Equipped)

The manual front seats may consist of:

The front head restraints tilt for extra

comfort. To tilt the head restraint, do the

following:

E197725

A

B

C

A bar to move the seat backward

and forward.

A lever to adjust the height of the

seat.

A lever to adjust the angle of the

seatback.

E144727

1. Adjust the seatback to an upright

driving or riding position.

2. Pivot the head restraint forward toward

POWER SEATS

your head to the desired position.

WARNINGS

After the head restraint reaches the

forward-most tilt position, pivoting it

forward again will then release it to the

rearward, un-tilted position.

Do not adjust the driver seat or

seatback when your vehicle is

moving. Adjusting your seatback

while your vehicle is in motion may cause

loss of control of your vehicle.

MANUAL SEATS

Reclining the seatback can cause an

occupant to slide under the seat's

safety belt, resulting in severe

WARNINGS

Do not adjust the driver seat or

seatback when your vehicle is

personal injuries in the event of a crash.

moving. Adjusting your seatback

while your vehicle is in motion may cause

loss of control of your vehicle.

112

Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing

Seats

E194195

1

Power Lumbar(If Equipped)

1

E187688

E156656

REAR SEATS

Folding the Seatback

1. Press the unlock buttons down.

2. Push the seatback forward.

Note: Before lowering the seatback(s),

remove the outboard head restraints. See

Head Restraints (page 110).

Note: Your vehicle may have split

seatbacks that must be folded individually.

113

Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing

Seats -> Head Restraints for Your Ford Focus 4 Door Third generation(2010-2017)

Related Topics

Seats