Vehicle Care -> Cleaning the Exterior for Your Ford Focus 4 Door Third generation(2010-2017)

Vehicle Care  
Name  
Specification  
Premium Glass Cleaner / Nettoie-vitres de qualité supérieure (Canada)  
ZC-23 (U.S.)  
CXC-100 (Canada)  
Motorcraft® Wheel and Tire Cleaner (U.S.)  
Wheel and Tire Cleaner / Nettoyant pour roues et pneus (Canada)  
ZC-37-A (U.S. & Canada)  
-
Exterior Chrome Parts  
CLEANING THE EXTERIOR  
Wash your vehicle regularly with cool or  
lukewarm water and a neutral pH  
shampoo, we recommend Motorcraft  
Detail Wash.  
Apply a high quality-cleaning product  
to bumpers and other chrome parts.  
Follow the manufacturers instructions.  
We recommend Motorcraft Custom  
Bright Metal Cleaner.  
Do not apply the cleaning product to  
hot surfaces. Do not leave the cleaning  
product on chrome surfaces longer  
than the time recommended.  
Using other non-recommended  
cleaners can result in severe and  
permanent cosmetic damage.  
Never use strong household detergents  
or soap, for example dish washing or  
laundry liquid. These products can  
discolor and spot painted surfaces.  
Never wash your vehicle when it is hot  
to the touch, or during strong or direct  
sunlight.  
Dry your vehicle with a chamois or soft  
terry cloth towel to eliminate water  
spotting.  
Immediately remove fuel spillages, bird  
droppings, insect deposits and road tar.  
These may cause damage to your  
vehicles paintwork or trim over time.  
We recommend Motorcraft Bug and  
Tar Remover.  
Note: Never use abrasive materials, for  
example steel wool or plastic pads as they  
can scratch the chrome surface.  
Note: Do not use chrome cleaner, metal  
cleaner or polish on wheels or wheel covers.  
Exterior Plastic Parts  
For routine cleaning we recommend  
Motorcraft Detail Wash. If tar or grease  
spots are present, we recommend  
Motorcraft Bug and Tar Remover.  
Remove any exterior accessories, for  
example antennas, before entering a  
car wash.  
Stripes or Graphics(If Equipped)  
Hand washing your vehicle is preferred  
however, pressure washing may be used  
under the following conditions:  
Note: Suntan lotions and insect repellents  
can damage painted surfaces. If these  
substances come in contact with your  
vehicle, wash the affected area as soon as  
possible.  
Do not use water pressure higher than  
2,000 psi (14,000 kPa).  
Do not use water hotter than 179°F  
(82°C).  
238  
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing  
Vehicle Care  
Use a spray with a 40° wide spray  
Do not allow wax to come in contact  
angle pattern.  
with any non-body (low-gloss black)  
colored trim. The wax will discolor or  
stain the parts over time.  
Keep the nozzle at a 12 in (305 mm)  
distance and 90° angle to your  
vehicle's surface.  
Roof racks.  
Bumpers.  
Grained door handles.  
Side moldings.  
Mirror housings.  
Windshield cowl area.  
Note: Holding the pressure washer nozzle  
at an angle to the vehicle's surface may  
damage graphics and cause the edges to  
peel away from the vehicle's surface.  
Underbody  
Do not apply wax to glass areas.  
Flush the complete underside of your  
vehicle frequently. Keep body and door  
drain holes free of debris or foreign  
material.  
After waxing, your car's paint should  
feel smooth, and be free of streaks and  
smudges.  
Under Hood  
CLEANING THE ENGINE  
Engines are more efficient when they are  
clean because grease and dirt buildup keep  
the engine warmer than normal.  
For removing black rubber marks from  
under the hood we recommend Motorcraft  
Wheel and Tire Cleaner or Motorcraft Bug  
and Tar Remover.  
When washing:  
WAXING  
Take care when using a power washer  
to clean the engine. The high-pressure  
fluid could penetrate the sealed parts  
and cause damage.  
Regular waxing is necessary to protect your  
car's paint from the elements. We  
recommend that you wash and wax the  
painted surface once or twice a year.  
Do not spray a hot engine with cold  
water to avoid cracking the engine  
block or other engine components.  
Spray Motorcraft Engine Shampoo and  
Degreaser on all parts that require  
cleaning and pressure rinse clean. In  
Canada, use Motorcraft Engine  
Shampoo.  
When washing and waxing, park your  
vehicle in a shaded area out of direct  
sunlight. Always wash your vehicle before  
applying wax.  
Use a quality wax that does not contain  
abrasives.  
Follow the manufacturers instructions  
Never wash or rinse the engine while it  
is hot or running; water in the running  
engine may cause internal damage.  
to apply and remove the wax.  
Apply a small amount of wax in a  
back-and-forth motion, not in circles.  
239  
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing