Climate Controls -> Dual automatic temperature control for Your Ford Fusion 4 Door First Generation (2006-2012)

Climate Controls  
During extreme high ambient temperatures when idling stationary for  
extended periods of time in gear, it is recommended to run the A/C in  
the MAX A/C position, reduce blower fan speed from the highest setting  
and put the vehicle’s transmission into the P (Park) gear position  
(automatic transmission only) to continue to receive cool air from your  
A/C system.  
For maximum cooling performance in MAX A/C mode:  
1. Select MAX A/C.  
2. Select the coolest temperature setting.  
3. Set the fan to the highest speed initially. As the interior starts to cool  
down, adjust the fan speed to maintain comfort.  
To aid in side window defogging/demisting in cold weather:  
1. Select  
.
2. Select A/C.  
3. Adjust the temperature control to maintain comfort.  
4. Set the fan speed to the highest setting.  
5. Direct the outer instrument panel vents towards the side windows.  
To increase airflow to the outer instrument panel vents, close the vents  
located in the middle of the instrument panel.  
DUAL AUTOMATIC TEMPERATURE CONTROL (IF EQUIPPED)  
1. AUTO/Driver temperature: Press to engage full automatic  
operation. Select the desired temperature using the temperature control.  
46  
2011 Fusion (fsn)  
Owners Guide, 3rd Printing  
USA (fus)  
Climate Controls  
The system will automatically determine fan speed, airflow distribution,  
A/C on or off, and outside or recirculated air, to heat or cool the vehicle  
to reach the desired temperature. Turn to increase/decrease the  
temperature on the driver side of the vehicle. The control also adjusts  
the passenger side temperature when PASS TEMP is disengaged. The  
recommended initial setting is between 72°F (22°C) and 75°F (24°C),  
then adjust for comfort. The driver side temperature setting will appear  
in the upper left corner of the display.  
R
2.  
Rear defroster: Press to activate/deactivate the rear window  
defroster. The button will also activate/deactivate the heated mirrors (if  
equipped). Refer to Rear window defroster later in this chapter for  
more information.  
3.  
Defrost: Distributes outside air through the windshield defroster  
vents and demister vents. Can be used to clear the windshield of fog and  
thin ice. The system will automatically provide outside air to reduce  
window fogging. Press this button again to return to the previous air flow  
selection. To return to full automatic control, press AUTO.  
4.  
: Distributes air through the windshield defroster vents, demister  
vents, floor vents and rear seat floor vents. The system will automatically  
provide outside air to reduce window fogging. To return to full automatic  
control, press AUTO.  
5.  
system. When the system is off, outside air is prevented from entering  
the vehicle through the vents. Press + or – to select the desired  
fan speed manually. To return to full automatic control, press AUTO.  
6. : Distributes air through the instrument panel vents. To return to  
full automatic control, press AUTO.  
7. : Distributes air through the instrument panel vents, demister  
Power/  
: Press to activate/deactivate the climate control  
vents, floor vents and rear seat floor vents. To return to full automatic  
control, press AUTO.  
8.  
: Distributes air through the demister vents, floor vents and rear  
seat floor vents. To return to full automatic control, press AUTO.  
9. PASS TEMP (passenger temperature): Press to engage/disengage  
separate passenger side temperature control. Turn to increase/decrease  
the temperature on the passenger side of the vehicle. The recommended  
initial setting is between 72°F (22°C) and 75°F (24°C), then adjust for  
comfort. The passenger side temperature setting will appear in the upper  
right corner of the display.  
47  
2011 Fusion (fsn)  
Owners Guide, 3rd Printing  
USA (fus)  
Climate Controls  
10.  
Passenger heated seat control (if equipped): Press to  
activate/deactivate the passenger heated seat. See Heated seats in the  
Seating and Safety Restraints chapter.  
11.  
Recirculated air: Press to activate/deactivate air recirculation in  
the vehicle. Recirculated air may reduce the amount of time needed to  
cool down the interior of the vehicle, when used with A/C, and may also  
help reduce undesired odors from reaching the interior of the vehicle.  
Recirculated air engages automatically when MAX A/C is selected or can  
be engaged manually in any airflow mode except  
(defrost).  
Recirculated air may turn off automatically in all airflow modes except  
MAX A/C. When the ignition switch is turned off and back on, the  
climate system will return to the recirculated air mode only if the A/C  
button LED is illuminated and the air distribution selection is  
either  
(panel) or  
(panel/floor).  
12. MAX A/C: Distributes recirculated air through the instrument panel  
vents to cool the vehicle. This re-cooling of the interior air is more  
economical and efficient. Recirculated air may also help reduce  
undesirable odors from entering the vehicle. Press the MAX A/C button  
again for normal A/C operation.  
13. A/C: Press to activate/deactivate air conditioning. Use with  
recirculated air to improve cooling performance and efficiency. Engages  
automatically in MAX A/C,  
(defrost) and  
(floor/defrost).  
14. Driver heated seat control (if equipped): Press to  
activate/deactivate the driver heated seat. See Heated seats in the  
Seating and Safety Restraints chapter.  
Outside temperature: The outside temperature will appear in the  
display and is labeled EXT TEMP.  
Temperature conversion: To switch between Fahrenheit and Celsius,  
refer to Message center in the Instrument Cluster chapter.  
48  
2011 Fusion (fsn)  
Owners Guide, 3rd Printing  
USA (fus)