Capacities and Specifications
Name
Specification
CXC-51-A (Canada)
If you are unable to find an engine oil that
meets the specification defined by
WSS-M2C945-A, it is acceptable to use a
SAE 5W-20 engine oil that meets API SN
requirements and displays the API
Motor oils of the recommended viscosity
grade that meet API SN requirements and
display the API Certification Mark for
gasoline engines are also acceptable. Do
not use oil labeled with API SN service
category unless the label also displays the
API certification mark.
Certification Mark for gasoline engines.
Note: Do not use more than 1.1 qt (1 L) of
the alternative engine oil between
scheduled service intervals.
Note: Automatic transmissions that require
MERCON® LV transmission fluid should
only use MERCON® LV transmission fluid.
Using oil and fluids that do not meet the
defined specification and viscosity grade
may lead to:
•
Component damage which may not be
covered by the vehicle Warranty.
•
•
•
•
•
Longer engine cranking periods.
Increased emission levels.
Reduced engine performance.
Reduced fuel economy.
Reduced brake performance.
Do not use supplemental engine oil
E142732
additives because they are unnecessary
and could lead to engine damage that may
not be covered by the vehicle Warranty.
An oil that displays this symbol conforms
to current engine, emission system and
fuel economy performance standards of
the International Lubricants Specification
Advisory Committee (ILSAC).
Alternative Engine Oil for
Extremely Cold Climates
To improve engine cold start performance,
we recommend that you use the following
alternative engine oil where the ambient
temperature reaches -22°F (-30°C) or
below.
Materials
Name
Specification
Motorcraft® SAE 0W-20 Synthetic Blend Motor Oil
Engine Oil - SAE 0W-20
XO-0W20-QSP (U.S.)
WSS-M2C947-A
278
2017 Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, Second Printing
English 