Maintenance
Note: Make sure that the wiper arm does
Headlamp Aiming Target
not spring back against the glass when the
wiper blade is not attached.
1. Lift the wiper arm.
3
E142592
A
B
8 ft (2.4 m)
Ground to the center of the
headlamp low beam bulb
C
D
25 ft (7.6 m)
2
E130060
Horizontal reference line
2. Slightly rotate the wiper blade.
Vertical Aim Adjustment Procedure
3. Disengage the wiper blade from the
wiper arm.
1. Park your vehicle on level ground
approximately 25 ft (7.6 m) from a wall
or screen.
4. Remove the wiper blade.
5. Install in the reverse order.
2. Measure the distance from the ground
to the center of the headlamp low
beam bulb and mark an 8 ft (2.4 m)
long horizontal reference line on the
wall or screen at this height.
Note: Make sure that the wiper blade locks
into place.
ADJUSTING THE HEADLAMPS
Vertical Aim Adjustment
If your vehicle has been involved in a crash,
have the aim of the headlamp beam
checked by an authorized dealer.
227
2017 Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, Second Printing
English 