Parking Aids -> Principle of Operation for Your Ford Fusion 4 Door Second Generation (2013-2020)

Parking Aids  
Note: The sensing system cannot be turned  
off when a MyKey is present. See Principle  
of Operation (page 55).  
PRINCIPLE OF OPERATION  
WARNINGS  
Note: If you attach certain add-on devices  
such as a trailer or bike rack, the rear sensing  
system may detect that add-on device and  
therefore provide warnings. It is suggested  
that you disable the rear sensing system  
when you attach an add-on device to your  
vehicle to prevent these warnings.  
To help avoid personal injury, please  
read and understand the limitations  
of the system as contained in this  
section. Sensing is only an aid for some  
(generally large and fixed) objects when  
moving on a flat surface at parking speeds.  
Certain objects with surfaces that absorb  
ultrasonic waves, surrounding vehicle's  
parking aid systems, traffic control  
systems, fluorescent lamps, inclement  
weather, air brakes, and external motors  
and fans may also affect the function of  
the sensing system; this may include  
reduced performance or a false activation.  
The sensing system warns the driver of  
obstacles within a certain range of your  
vehicle. The system turns on automatically  
whenever you switch the ignition on.  
You can turn the system on or  
off by pressing the parking aid  
button. If your vehicle does not  
E139213  
To help avoid personal injury, always  
use caution when in reverse (R) and  
when using the sensing system.  
have a parking aid button, the system can  
be switched off through the information  
display menu or from the pop-up message  
that appears once you shift the  
transmission into reverse (R). SeeGeneral  
Information (page 92).  
This system is not designed to  
prevent contact with small or moving  
objects. The system is designed to  
provide a warning to assist the driver in  
detecting large stationary objects to avoid  
damaging your vehicle. The system may  
not detect smaller objects, particularly  
those close to the ground.  
If a fault is present in the system, a warning  
message appears in the information  
display. See Information Messages  
(page 96).  
Certain add-on devices such as large  
trailer hitches, bike or surfboard racks  
and any device that may block the  
normal detection zone of the system, may  
create false beeps.  
REAR PARKING AID  
The rear parking aid sensors automatically  
turn on when you shift into reverse (R).  
As your vehicle moves closer to the  
obstacle, the rate of the audible warning  
increases. When the obstacle is less than  
12 in (30 cm) away, the warning sounds  
continuously. If the system detects an  
object farther than 12 in (30 cm) from the  
corners of the bumper, the tone sounds for  
only three seconds. If the system detects  
an approaching object the warning sounds  
again.  
Note: Keep the sensors, located on the  
bumper or fascia, free from snow, ice and  
large accumulations of dirt. If the sensors  
are covered, the systems accuracy can be  
affected. Do not clean the sensors with  
sharp objects.  
Note: If your vehicle sustains damage to  
the bumper or fascia, leaving it misaligned  
or bent, the sensing zone may be altered  
causing inaccurate measurement of  
obstacles or false alarms.  
152  
2017 Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, Second Printing  

Related Topics