Transmission -> Manual Transmission - 6-Speed Manual Transmission (MMT6) for Your Ford Fusion 4 Door Second Generation (2013-2020)

Transmission  
5. Release the parking brake, then slowly  
release the clutch pedal while slowly  
pressing on the accelerator.  
MANUAL TRANSMISSION - 6-  
SPEED MANUAL  
TRANSMISSION (MMT6)  
During each shift, the clutch pedal must  
be fully pressed to the floor. Make sure the  
floor mat is properly positioned so it  
doesn't interfere with the full extension of  
the clutch pedal.  
Using the Clutch  
Note: Failure to fully press the clutch pedal  
to the floor may cause increased shift  
efforts, prematurely wear transmission  
components or damage the transmission.  
Recommended Shift Speeds  
Note: Do not downshift into first (1) when  
your vehicle is moving faster than 15 mph  
(24 km/h). This will damage the clutch.  
Note: Do not drive with your foot resting on  
the clutch pedal or use the clutch pedal to  
hold your vehicle at a standstill while  
waiting on a hill. These actions will reduce  
the life of the clutch and could nullify a  
clutch warranty claim.  
Recommended upshifts (for best fuel  
economy) when accelerating  
Shift from:  
1 - 2  
2 - 3  
3 - 4  
4 - 5  
5 - 6  
15 mph (24 km/h)  
26 mph (42 km/h)  
38 mph (61 km/h)  
42 mph (67 km/h)  
50 mph (80 km/h)  
Reverse  
E144954  
Note: Make sure that your vehicle is at a  
complete stop before you shift into reverse  
(R). Failure to do so may damage the  
transmission.  
Manual transmission vehicles have a  
starter interlock that prevents cranking the  
engine unless the clutch pedal is fully  
pressed.  
1. Press the clutch pedal to the floor to  
disengage clutch.  
To start your vehicle:  
1. Make sure the parking brake is fully set.  
2. Move the gearshift lever into the  
neutral position.  
2. Press the clutch pedal to the floor, then  
put the gearshift lever in the neutral  
position.  
3. Shift into reverse (R) by raising the  
collar below the gearshift knob up, then  
moving the lever fully to the left, then  
forward.  
3. Start the engine.  
4. Press the brake pedal and move the  
gearshift lever to the desired gear; first  
(1) or reverse (R).  
139  
2017 Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, Second Printing