069-084 Ford KA EN:065-080 Ford KA IT 14-10-2010 11:28 Pagina 77
❒
❒
❒
❒
Only one child is to be strapped
to each retaining system.
ASSEMBLY SETUP
ISOFIX CHILD SEAT
Always check the seat belts do not
fit around the child’s throat.
Provision has been made on the car to
mount a Universal Isofix child restraint
system, a new European standardised
system for carrying children safely.
While travelling, do not let the child
sit incorrectly or release the belts.
Never carry children on your lap,
even newborns. No one can hold
a child in the case of an accident.
Isofix systems can be fitted alongside
a traditional restraint system.
An example of child seat is shown in
fig. 9. The Universal Isofix child seat
covers weight group 1. Specific Isofix
child seats cover the other weight
groups. These seats must be designed,
tested and type-approved specifically
for this car (refer to the list of cars
attached to the child seat).
❒
In case of an accident, replace
the child seat with a new one.
WARNING
In cars fitted with
passenger’s air bag never
Due to its different anchoring system,
the child’s seat shall be anchored to
the proper lower metal rings A-fig. 10,
set between rear seat back and cushion.
After removing the rear shelf, secure
the upper belt (provided with the child’s
seat) to ring B-fig. 11 set between the
rear backrest and the boot floor.
Do not use the ring B to secure other
objects.
place child restraint systems on the
front seat, since children must never
travel on the front seat.
KA00052m
fig. 9
The Universal Isofix “Duo Plus” child
seat is available from Lineaccessori Ford.
For any further details on installation/
use, refer to the instruction manual
for the child seat.
Remember that in case of Universal
Isofix child seats, you can use all seats
approved with the marking ECE R44/03
“Universal Isofix”.
77
English 
