Appendices -> Electromagnetic compatibility for Your Ford Kuga SUV First Generation (2008-2012)

Appendices  
E114220  
WARNINGS  
ELECTROMAGNETIC  
COMPATIBILITY  
Radio frequency (RF) transmitter  
equipment (e.g. cellular telephones,  
amateur radio transmitters etc.) may  
only be fitted to your vehicle if they comply  
with the parameters shown in the table  
below. There are no special provisions or  
conditions for installations or use.  
WARNINGS  
Your vehicle has been tested and  
certified to legislations relating to  
electromagnetic compatibility  
Do not mount any transceiver,  
microphones, speakers, or any  
other item in the deployment path  
of the airbag system.  
(72/245/EEC, UN ECE Regulation 10 or  
other applicable local requirements). It is  
your responsibility to ensure that any  
equipment you have fitted complies with  
applicable local legislations. Have any  
equipment fitted by properly trained  
technicians.  
Do not fasten antenna cables to  
original vehicle wiring, fuel pipes and  
brake pipes.  
211  
Appendices  
WARNINGS  
Keep antenna and power cables at  
least 100mm from any electronic  
WARNINGS  
modules and airbags.  
1
2
3
4
E85998  
Frequency  
Band MHz  
Maximum output power Watt  
(Peak RMS)  
Antenna Positions  
1 – 30  
50 W  
50 W  
50 W  
50 W  
50 W  
10 W  
10 W  
10 W  
10 W  
3, 4  
30 – 54  
1, 2, 3  
1, 2, 3  
1, 2, 3  
1, 2, 3  
1, 2, 3  
1, 2, 3  
1, 2, 3  
1, 2, 3  
68 – 87.5  
142 – 176  
380 – 512  
806 – 940  
1200 – 1400  
1710 – 1885  
1885 – 2025  
Note: After the installation of RF  
transmitters, check for disturbances from  
and to all electrical equipment in the  
vehicle, both in the standby and transmit  
modes.  
Check all electrical equipment:  
with the ignition ON  
with the engine running  
during a road test at various speeds.  
212  
Appendices  
Check that electromagnetic fields  
generated inside the vehicle cabin by the  
transmitter installed do not exceed  
applicable human exposure requirements.  
213