Keys and remote controls for Your Ford Kuga SUV First Generation (2008-2012)

Keys and remote controls  
GENERALINFORMATIONON  
RADIO FREQUENCIES  
CAUTION  
The radio frequency used by your  
remote control can also be used by  
other short distance radio  
2
transmissions (e.g. amateur radios,  
medical equipment, wireless headphones,  
remote controls and alarm systems). If  
the frequencies are jammed, you will not  
be able to use your remote control. You  
can lock and unlock the doors with the  
key.  
1
E78284  
1. Slide the release slider in the direction  
of the arrow.  
Note: You could unlock the doors if you  
press the buttons on the remote control  
unintentionally.  
2. Remove the key blade.  
The operating range between your  
remote control and your vehicle varies  
depending on the environment.  
PROGRAMMING THE  
REMOTE CONTROL  
You can programme a maximum of eight  
remote controls to use with your vehicle  
(including any supplied with your vehicle).  
Ask your dealer for instructions.  
3
E105064  
3. Twist the screwdriver in the position  
shown to separate the two halves of  
the remote control.  
CHANGING THE REMOTE  
CONTROL BATTERY  
CAUTION  
Make sure that you dispose of  
old batteries in an  
Do not touch the battery contacts or  
the printed circuit board with the  
screwdriver.  
environmentally friendly way.  
Seek advice from your local authority  
regarding recycling.  
4. Carefully prise out the battery with the  
screwdriver.  
5. Install a new battery (3V CR 2032) with  
the + facing downwards.  
6. Assemble the two halves of the  
remote control.  
27  
Keys and remote controls  
7. Install the key blade.  
28