Navigation system
Installing the micro SD card
GETTING STARTED
CAUTION
Using the system with the engine off
will drain the battery.
1
Note: You will be charged when sending
and receiving text messages.
Note: Refer to your phone handbook for
all phone functions and operation.
2
Note: Keep the activation code (printed
on the installation guide) in a safe place.
Note: Retain the activation text message
in your mobile phone inbox.
E114212
Compatibility of phones
CAUTION
1. Remove the micro SD card from the
adaptor.
2. Insert the micro SD card into the
mobile phone.
As no common agreement exists,
mobile phone manufacturers are able
to implement a variety of profiles in
their Bluetooth devices. Because of this,
an incompatibility can occur between the
phone and hands-free system, which in
some cases may significantly degrade the
system performance. To avoid this
situation, only recommended phones
should be used.
Activating the mobile phone
navigation system
Note: The radio must be switched on
before connecting the mobile phone to
the in-car GPS receiver.
Note: The Ford Mobile Navigation must
be installed and activated on your mobile
phone.
Please visit the website
full details.
Note: It is possible to activate up to a
maximum of three phones.
Note: Detailed instructions are available
on the micro SD card and at
To connect the device to the system
follow the same procedure as for
Bluetooth hands free phones. See
Bluetooth setup (page 175).
1. Switch the radio on.
208
English 