Starting the engine
GENERAL INFORMATION
General points on starting
If the battery has been disconnected the
vehicle may exhibit some unusual driving
characteristics for approx. 8 kilometres
(5 miles) after reconnecting the battery.
E85766
This is because the engine management
system must realign itself with the engine.
Any unusual driving characteristics during
this period may be disregarded.
Ignition on
Press the start button once. All electrical
circuits are operational, warning lamps
and indicators illuminate.
Starting the engine by towing
or pushing
Starting with automatic
transmission
WARNING
To prevent damage you must not
push or tow start your vehicle. Use
booster cables and a booster
battery. See Using booster cables
(page 153).
Note: Releasing the brake pedal during
engine start will stop the engine cranking
and return to ignition on.
1. Make sure the transmission is in P or
N.
2. Fully depress the brake pedal.
3. Briefly press the start button.
KEYLESS STARTING
WARNINGS
Starting with manual
transmission
The keyless starting system may not
function if the key is close to metal
objects or electronic devices such
as mobile phones.
Note: Releasing the clutch pedal during
engine start will stop the engine cranking
and return to ignition on.
Always check that the steering
wheel lock is deactivated before
attempting to move your vehicle.
1. Fully depress the clutch pedal.
2. Briefly press the start button.
Note: A valid passive key must be
located inside the vehicle to switch the
ignition on and start the engine.
Starting a diesel engine
Note: Engine cranking will not
commence until the engine glow plug
cycle has been completed. This may take
several seconds in extremely cold
conditions.
Note: To start your engine you must also
fully depress the brake or clutch pedal,
depending on the transmission fitted.
Note: Continue to press the clutch or
brake pedal until engine cranking begins.
100
English 