Telephone
3. Scroll through the different phones by
Rejecting an incoming call
using the seek buttons and display the
phone to be debonded.
Incoming calls can be rejected by
pressing either the call reject button, the
CD or AM/FM buttons on the unit, or by
using the REJECT option in the menu.
4. Press the OK button to be debond.
USING THE TELEPHONE -
VEHICLES WITH:
Receiving a second incoming
call
NAVIGATION SYSTEM
Note: The second incoming call function
must be activated in your phone.
This chapter describes the phone
functions of the Navigation System.
If there is an incoming call, whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Note: Refer to your Navigation System
guide for details of the controls.
An active phone must be present.
Accepting a second incoming call
Even if connected to the Navigation
System, your phone can still be used in
the usual way.
Second incoming calls can be accepted
by pressing either the call accept button,
the MODE button on the remote control,
the PHONE button on the unit or by
using the ACCEPT option in the menu.
Making a call
Dialling a number
Note: This will cancel the ongoing call.
Phone numbers can be dialled using voice
control. See Voice control (page 181).
Rejecting a second incoming call
Second incoming calls can be rejected by
pressing either the call reject button, or
one of the following buttons on the unit:
CD, AM/FM.
Ending a call
Calls can be ended by pressing either the
END button, the MODE button on the
remote switch or the ON/OFF button on
the navigation system.
Muting the microphone
During a call, it is possible to mute the
microphone. Whilst muted, confirmation
will appear in the display.
Redialling a number
1. Press the PHONE button on the unit.
2. Select REDIAL.
DVD navigation units
Receiving an incoming call
Accepting an incoming call
Press the mute button (symbol of a
microphone with a line through it). Press
the button once again to turn this function
off.
Incoming calls can be accepted by
pressing either the call accept button, the
MODE button on the remote control, the
PHONE button on the unit or by using
the ACCEPT option in the menu.
179
English 