Windows and mirrors
Overriding the anti-trap function
CAUTION
6. Lift and hold the switch until the
window is fully closed.
7. Open the window and try to close it
automatically.
While you close the window for the
third time, the anti-trap function is
disabled. Make sure there are no
obstacles in the way of the closing
window.
8. Reset and repeat procedure if the
window does not close automatically.
EXTERIOR MIRRORS
To override this protection function when
there is a resistance, e.g. in the winter,
proceed as follows:
WARNING
Do not overestimate the distance
of the objects that you see in the
convex mirror. Objects seen in
1. Close the window twice until it
reaches the resistance and let it
reverse.
convex mirrors will appear smaller and
further away than they actually are.
2. Close the window a third time to the
resistance. The anti-trap function is
disabled and you cannot close the
window automatically. The window will
override the resistance and you can
close it fully.
Manual folding mirrors
Folding
Push the mirror towards the door window
glass.
3. If the window does not close after the
third attempt, have it checked by an
expert.
Unfolding
Make sure that you fully engage the mirror
in its support when returning it to its
original position.
Resetting the memory of the
electric windows
WARNING
The anti-trap function is deactivated
until you have reset the memory.
After the battery has been disconnected
from the vehicle you must reset the
memory separately for each window:
1. Lift and hold the switch until the
window is fully closed.
2. Release the switch.
3. Lift the switch again for one more
second.
4. Push and hold the switch until the
window is fully open.
5. Release the switch.
60
English 