Wipers and washers -> Windscreen washers for Your Ford Kuga SUV First Generation (2008-2012)

Wipers and washers  
WARNING  
A
B
Do not operate the washer for more  
than 10 seconds at a time, and  
never when the reservoir is empty.  
While the button at the end of the lever is  
pressed the washer will work in  
conjunction with the wipers.  
C
After releasing the button, the wipers  
operate for a short time.  
E71013  
REAR WINDOW WIPER AND  
WASHERS  
A
Low sensitivity  
On  
B
C
High sensitivity  
Intermittent wipe  
If you switch autowipers on, the wipers  
will not cycle until water is detected on  
the windscreen. The rain sensor will then  
continuously measure the amount of  
water on the windscreen and adjust the  
speed of the wipers automatically.  
Adjust the sensitivity of the rain sensor  
using the rotary control. With low  
sensitivity, the wipers will operate when  
the sensor detects a lot of water on the  
windscreen. With high sensitivity, the  
wipers will operate if the sensor detects  
a small amount of water on the  
windscreen.  
E71017  
Pull the lever towards the steering wheel.  
Reverse gear wipe  
WINDSCREEN WASHERS  
The rear wiper will be activated  
automatically when selecting reverse gear  
if:  
the rear wiper is not already switched  
on,  
the wiper lever is in position A, B, C  
or D and  
the front wiper is operating (when set  
to position B).  
The rear wiper will follow the front wiper  
interval (at intermittent or normal speed).  
E71016  
41