Cruise Control
Switching Cruise Control On
Press and release ON.
The indicator will display in the
instrument cluster.
PRINCIPLE OF OPERATION
Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal. You can use cruise
control when your vehicle speed is greater
than 20 mph (30 km/h).
Setting a Speed
1. Accelerate to the desired speed.
USING CRUISE CONTROL
2. Press and release SET+.
WARNINGS
3. Take your foot off the accelerator
Do not use cruise control in heavy
traffic, on winding roads or when the
road surface is slippery. This could
result in loss of vehicle control, serious
injury or death.
pedal.
Changing the Set Speed
•
•
•
Press and hold SET+ or SET-. Release
the control when you reach the desired
speed.
Press and release SET+ or SET-. The
set speed will change in approximately
1 mph (2 km/h) increments.
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release SET+.
When you are going downhill, your
vehicle speed may increase above
the set speed. The system will not
apply the brakes. Change down a gear to
assist the system in maintaining the set
speed. Failure to do so could result in loss
of vehicle control, serious injury or death.
Note: Cruise control will disengage if your
vehicle speed decreases more than 10 mph
(16 km/h) below your set speed while
driving uphill.
Canceling the Set Speed
Pull CAN toward you and release, or tap
the brake pedal. The system will not erase
the set speed.
Resuming the Set Speed
Pull RES toward you and release.
Switching Cruise Control Off
Note: You will erase the set speed if you
switch the system off.
Press and release OFF or switch the
ignition off.
The cruise control switches are located on
the steering wheel.
145
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing
English 