Locks for Your Ford Kuga SUV Second Generation (2013-2018)

Locks  
Reprogramming the Unlocking  
LOCKING AND UNLOCKING  
Power Door Locks  
Function in keyless vehicles  
You can reprogram the unlocking function  
so that only the drivers door is unlocked.  
See Remote Control (page 30).  
The power door lock control is located on  
the driver's and front passenger's door.  
Locking the Doors  
Press the button to lock all the  
doors. The direction indicators  
will illuminate.  
Press the button again within three  
seconds to confirm that all the doors are  
closed. The doors will lock again, and the  
direction indicators will flash if all the doors  
and the luggage compartment are closed.  
Note: If any door or the luggage  
compartment is not closed, or if the hood is  
not closed on vehicles that have an  
anti-theft alarm or remote start, the  
direction indicators will not flash.  
A
B
Lock  
Unlock  
Double Locking  
WARNING  
Remote Control  
The remote control can be used any time  
your vehicle is not running.  
Do not use double locking when  
passengers or animals are inside your  
vehicle. You will not be able to  
Unlocking the Doors  
unlock the doors from the inside if you have  
double locked them.  
Press the button to unlock the  
drivers door. The direction  
indicators will flash once.  
Double locking is a theft protection feature  
that prevents someone from opening the  
doors from the inside. You can only double  
lock the doors if they are all closed.  
Press the button again within three  
seconds to unlock all doors. The direction  
indicators will flash once.  
Note: You can unlock the driver's door with  
the key. Use the key when the remote  
control is not functioning.  
Press the button twice within  
three seconds.  
Note: When you lock your vehicle for  
several weeks, the remote control will be  
switched off. Your vehicle must be unlocked  
and the engine started using the key.  
Unlocking and starting your vehicle once will  
enable the remote control.  
Automatic Relocking  
The doors will relock automatically if you  
do not open a door within 45 seconds of  
unlocking the doors with the remote  
control. The door locks and the alarm will  
return to their previous state.  
33  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing  
Locks  
Note: If the child safety locks are on and  
Power Liftgate  
you pull the interior handle, you will only  
turn off the emergency locking, not the child  
safety lock. You can only open the doors  
using the external door handle.  
WARNINGS  
Make sure all passengers are clear  
of the liftgate area before using the  
power liftgate control.  
Note: If the doors have been unlocked using  
this method, the doors must be locked  
individually until the central locking function  
has been repaired.  
Close the liftgate properly to prevent  
exhaust fumes from entering your  
vehicle. This will prevent passengers  
and cargo from falling out. If you must drive  
with the liftgate open, keep the vents open  
so outside air can enter your vehicle.  
Locking the Doors Individually  
with the Key  
Note: When the central locking function  
fails to operate, lock the doors individually  
using the key in the position shown.  
Press twice within three seconds  
to open or close the liftgate, or  
to reverse the movement. See  
Power Liftgate (page 36).  
Note: Be careful when opening or closing  
the liftgate in a garage or other enclosed  
area to avoid damaging the liftgate.  
Locking and Unlocking the Doors  
from Inside  
Use the lock and unlock buttons located  
on the driver's and front passenger's door.  
Locking and Unlocking the Doors  
with the Key  
Note: Do not leave your keys in your vehicle.  
Locking with the Key  
Turn the top of the key toward the front of  
your vehicle.  
Left-hand Side  
Turn clockwise to lock.  
Double Locking with the Key  
Turn the key to the lock position twice  
Right-hand Side  
within three seconds.  
Turn counterclockwise to lock.  
Unlocking  
Unlock the driver's door using the key. You  
can unlock all other doors individually by  
pulling the interior door handles.  
34  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing  
Locks  
Opening the Liftgate  
Manually  
MANUAL LIFTGATE  
WARNINGS  
It is extremely dangerous to ride in a  
cargo area, inside or outside of a  
vehicle. In a crash, people riding in  
these areas are more likely to be seriously  
injured or killed. Do not allow people to ride  
in any area of your vehicle that is not  
equipped with seats and safety belts. Be  
sure everyone in your vehicle is in a seat  
and using a safety belt properly. Failure to  
follow this warning could result in serious  
personal injury or death.  
Make sure to close and latch the  
liftgate to prevent drawing exhaust  
fumes into your vehicle. This will also  
prevent passengers and cargo from falling  
out. If you must drive with the liftgate open,  
keep the vents or windows open so outside  
air comes into your vehicle. Failure to  
follow this warning could result in serious  
personal injury.  
Press the button located in the top of the  
liftgate pull cup handle to unlatch the  
liftgate, and then pull on the outside  
handle.  
With the Remote Control  
Press the button twice within  
three seconds.  
Note: Be careful when opening or closing  
the liftgate in a garage or other enclosed  
area to avoid damaging the liftgate.  
Closing the Liftgate  
Note: Do not hang anything, for example a  
bike rack, from the glass or liftgate. This  
could damage the liftgate and its  
components.  
Note: Do not leave the liftgate open while  
driving. This could damage the liftgate and  
its components.  
A handle is located inside the liftgate to  
help with closing.  
35  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing  
Locks  
Liftgate Switch  
POWER LIFTGATE  
WARNINGS  
Do not operate the liftgate unless it  
is free from obstruction.  
Careless opening and closing of the  
liftgate can override the protection  
function and cause injuries.  
Do not place objects on the liftgate.  
Make sure you fully close the liftgate  
after operation.  
Remote Control and Center Console  
Switch  
Operate the liftgate only when your  
vehicle is stationary.  
You can operate the liftgate using the  
remote control, the center console switch,  
the liftgate switch, the liftgate release  
handle or the hands-free feature.  
Note: Switch the ignition on to operate the  
liftgate using the center console switch.  
You will hear three chimes when the  
liftgate begins to close.  
Note: Make sure there is enough headroom  
Five short chimes indicate a malfunction  
with the open or close request. This could  
be caused by one of the following:  
to open the liftgate.  
Note: If your vehicle has an automatic  
transmission, make sure the transmission  
selector lever is in park.  
Note: In extreme weather conditions,  
automatic opening and closing will not work  
with the liftgate frozen to the seal.  
Note: The liftgate will stop automatically  
while opening and reverse some distance if  
there is an obstacle in the way.  
Note: The liftgate will stop automatically  
while closing and fully open if there is an  
obstacle in the way.  
You switch the ignition on and the  
transmission selector lever is not in  
park.  
The battery voltage is below the  
minimum operating voltage.  
Your vehicle speed exceeds 3 mph (5  
km/h).  
To open a fully closed liftgate, you can  
either:  
Press the button on the remote control  
twice within three seconds.  
Note: You can manually operate the  
Press the center console switch.  
Use the liftgate release handle.  
Use the hands-free feature.  
liftgate.  
36  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing  
Locks  
To fully open a partially opened liftgate,  
you can either:  
Press the button on the remote control  
twice within three seconds.  
Press the center console switch or the  
liftgate switch.  
Use the liftgate release handle.  
Use the hands-free feature.  
To stop the liftgate, you can either:  
Press the button on the remote control.  
A further remote control operation will  
be delayed for approximately three  
seconds.  
Press the center console switch or the  
The liftgate will close automatically when  
it comes into contact with the vehicle body.  
liftgate switch.  
Use the liftgate release handle.  
Use the hands-free feature.  
Programming the Liftgate  
1. Open the liftgate.  
Closing the Liftgate  
WARNING  
2. Manually move the liftgate to the new  
required position.  
3. Press and hold the liftgate switch for  
at least three seconds. You will hear a  
chime.  
The bounce-back feature will not  
work and it will not detect obstacles  
when the liftgate is in contact with  
the vehicle body.  
Hands-Free Feature  
Note: Do not leave a passive key in your  
vehicle when closing the liftgate. A message  
will be shown in the display. See  
Note: Make sure you have a remote control  
within 3 feet (1 meter) of the liftgate.  
1. Move your foot under and away from  
the rear bumper similar to a kicking  
motion. Do not move your foot  
sideways or the sensors may not detect  
the motion.  
Information Messages (page 75).  
Note: A recessed grip is located inside the  
liftgate to help with closing.  
You can either:  
Press the button on the remote control  
twice within three seconds.  
Press the center console switch or the  
liftgate switch.  
Use the liftgate release handle.  
Use the hands-free feature.  
Manually close the liftgate  
37  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing  
Locks  
Note: If the system does not function, you  
will need to use the key blade to lock and  
unlock your vehicle.  
The system allows you to operate your  
vehicle without the use of a key or remote  
control.  
2. The liftgate will power open or close.  
Note: Manually pushing or pulling the  
liftgate may enable the bounce-back  
feature and stop the liftgate from opening  
or closing.  
Note: Splashing water may cause the  
liftgate to open. Keep the remote control  
away from the rear bumper detection area  
when washing your vehicle.  
Passive locking and unlocking requires a  
valid passive key to be located within one  
of the three external detection ranges.  
These are located approximately five feet  
(1.5 meters) from the front door handles  
and the liftgate.  
Note: This feature may not function  
Passive Key  
correctly if your vehicle has a tow ball.  
Your vehicle can be locked and unlocked  
with the passive key. You can use the  
passive key as a remote control. See  
Locking and Unlocking (page 33).  
KEYLESS ENTRY  
General Information  
Locking Your Vehicle  
Note: Your vehicle does not automatically  
lock. If you do not touch a locking sensor  
your vehicle will remain unlocked.  
WARNING  
The system may not function if the  
key is close to metal objects or  
electronic devices such as cell  
phones.  
The system will not function if:  
Your vehicle battery has no charge.  
The passive key frequencies are  
jammed.  
The passive key battery has no charge.  
38  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing  
Locks  
Unlocking Your Vehicle  
One long flash of the direction indicators  
confirms that all the doors and the liftgate  
have been unlocked and that the alarm  
has been disarmed.  
Note: When your vehicle remains locked  
for longer than three days, the system will  
enter an energy-saving mode. This is to  
prevent the vehicle battery running out of  
charge. When your vehicle is unlocked while  
in this mode, the reaction time of the system  
may be a little longer than normal. To exit  
the energy-saving mode, unlock your  
vehicle.  
The locking sensors are on the front door  
handles.  
Note: A valid passive key must be located  
within the detection range of that door.  
Touch a locking sensor once to lock your  
Unlocking Only the Driver's Door  
vehicle and arm the alarm.  
You can program the system so that only  
the driver door is unlocked. See Remote  
Control (page 30).  
Touch a locking sensor twice within three  
seconds to double lock your vehicle and  
arm the alarm.  
If the unlocking function is reprogrammed  
so that only the driver door is unlocked the  
following will occur:  
Note: When locking your vehicle, do not  
grip the door handle.  
Note: Keep the door handle clean to make  
If the drivers door is the first door  
which is opened, the other doors will  
remain locked. All the other doors can  
be unlocked from inside your vehicle  
by pressing the unlock button located  
on the driver's and front passenger's  
door. Doors can be unlocked  
sure the system operates correctly.  
Note: Your vehicle will remain locked for  
a few seconds. When the delay period is  
over, you can open the doors again, provided  
the passive key is within the respective  
detection range.  
Two short flashes of the direction  
indicators confirms that all the doors and  
the liftgate have been locked and that the  
alarm has been armed.  
individually by pulling the interior door  
handles on those doors.  
If the front passenger's door is the first  
door which is opened, all the doors and  
the liftgate will be unlocked.  
Liftgate  
Disabled Keys  
The liftgate will not fully close if a passive  
key is located inside the luggage  
Any keys left inside your vehicle interior  
compartment with the doors locked.  
when it is locked will be disabled.  
Note: If a second passive key is located  
within the liftgate detection range, the  
liftgate can be fully closed.  
You cannot use a disabled key to switch  
the ignition on or start the engine.  
39  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing  
Locks  
You must enable all passive keys again in  
order to use them.  
To enable all your passive keys, unlock your  
vehicle using a passive key that has not  
been disabled or the remote control  
unlocking function.  
All passive keys will then be enabled if you  
switch the ignition on or you start your  
vehicle with a valid key.  
Locking and Unlocking the Doors  
with the Key Blade  
1. Carefully remove the cover.  
2. Remove the key blade and insert it into  
the lock.  
Note: Only the driver's door handle has a  
lock cylinder.  
40  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing