Starting and Stopping the Engine -> Steering Wheel Lock for Your Ford Kuga SUV Second Generation (2013-2018)

Starting and Stopping the Engine  
2. Press the button until the engine has  
Fast Restart  
started.  
The fast restart feature allows you to  
restart your vehicle within 10 seconds of  
switching it off, even if a valid passive key  
is not detected.  
Within 10 seconds of switching your vehicle  
off, press the brake pedal and press the  
button. After 10 seconds have expired, you  
can no longer start your vehicle if a valid  
passive key is not detected.  
Once your vehicle has started, it remains  
running until you press the button, even if  
a valid passive key has not been detected.  
If you open and close a door while your  
vehicle is running, the system searches for  
a valid passive key. You cannot start your  
vehicle if a valid passive key is not detected  
within 10 seconds.  
Note: Releasing the clutch pedal during  
engine start will stop the engine cranking  
and return to ignition on. A message will be  
shown in the display.  
Stopping the Engine When Your  
Vehicle is Stationary  
Note: The ignition, all electrical circuits  
warning lamps and indicators will be  
switched off.  
Manual Transmission  
Briefly press the button.  
Automatic Transmission  
1. Move the transmission selector lever  
to park.  
Manual Transmission  
If the engine does not crank when the  
clutch pedal has been fully depressed and  
the button is pressed:  
2. Press the button.  
Stopping the Engine When Your  
Vehicle is Moving  
1. Fully depress both the clutch and brake  
WARNING  
pedals  
Stopping the engine when your  
vehicle is moving will result in a loss  
of brake and steering assistance. The  
steering will not lock, but higher effort will  
be required. When the ignition is switched  
off some electrical circuits, warning lamps  
and indicators may also be off.  
2. Press the button until the engine has  
started.  
Note: Releasing the clutch pedal during  
engine start will stop the engine cranking  
and return to ignition on. A message will be  
shown in the display.  
1. Press and hold the button for a  
moment, or press it three times within  
two seconds.  
2. Move the transmission selector lever  
to neutral and use the brakes to bring  
your vehicle to a safe stop.  
3. When your vehicle has stopped, move  
the transmission selector lever to park  
and switch the ignition off.  
STEERING WHEEL LOCK  
WARNING  
Always check that the steering is  
unlocked before attempting to move  
your vehicle.  
Vehicles without Keyless Starting  
To lock the steering wheel:  
111  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing  
Starting and Stopping the Engine  
1. Remove the key from the ignition  
Note: Releasing the clutch pedal while the  
engine is starting will stop the engine  
cranking and return to ignition on.  
1. Fully depress the clutch pedal.  
2. Start the engine.  
switch.  
2. Rotate the steering wheel slightly to  
engage the lock.  
Vehicles with Keyless Starting  
Note: The steering wheel lock does not  
engage when the ignition is on or if your  
vehicle is moving.  
Your vehicle has an electronically  
controlled steering wheel lock. This  
operates automatically.  
Vehicles with Automatic Transmission  
Note: Do not touch the accelerator pedal.  
1. Move the transmission selector lever  
to position P or N.  
2. Start the engine.  
The steering wheel lock engages after a  
short period after you have parked your  
vehicle and the passive key is outside of  
your vehicle.  
All Vehicles  
If the engine does not start within 10  
seconds, wait for a short period and try  
again.  
If the engine does not start after three  
attempts, wait 10 seconds and follow the  
flooded engine procedure.  
If you have difficulty starting the engine  
when the temperature is below -13°F  
(-25°C), press the accelerator pedal to the  
mid-way point of its travel and try again.  
Unlocking the Steering Wheel  
Vehicles with Automatic Transmission  
Switch the ignition on or press the brake  
pedal.  
Vehicles with Manual Transmission  
Switch the ignition on or press the clutch  
Flooded Engine  
pedal.  
Vehicles with Manual Transmission  
1. Fully depress the clutch pedal.  
STARTING A GASOLINE  
ENGINE  
Note: You can only operate the starter for  
a limited period of time, for example 10  
seconds. The number of start attempts is  
limited to approximately six. If you exceed  
this limit, the system will not allow you to  
try again until a period of time has elapsed,  
for example 30 minutes.  
2. Fully depress the accelerator pedal and  
hold it there.  
3. Start the engine.  
Vehicles with Automatic Transmission  
1. Move the transmission selector lever  
to position P or N.  
2. Fully depress the accelerator pedal and  
Cold or Hot Engine  
Vehicles with Manual Transmission  
Note: Do not touch the accelerator pedal.  
hold it there.  
3. Start the engine.  
All Vehicles  
If the engine does not start, repeat the cold  
or hot engine procedure.  
112  
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, Second Printing