Convenience features
Resetting the memory
AUDIO INPUT JACK
You can find the socket in the glove box or
the center console. See Auxiliary input
jack (page 272).
If any seat position travel is interrupted
(e.g. an obstacle in the way or loss of
power supply), you will need to reset the
memory.
Note: Make sure all electrical accessories
USB PORT
You can find the socket in the glove box or
the center console. See Connectivity
(page 299).
are switched off.
1. Turn the ignition to position II.
2. Operate the seat adjustment control
to move the seat in the required
direction until it stops. A click will be
heard.
FLOOR MATS
3. Release the seat adjustment control
and immediately press and hold the
switch in the same direction for at least
3 seconds. Keep it held until the seat
stops at the mechanical end of its
travel and a click is heard.
WARNING
When using the floor mats, always
make sure the floor mat is properly
secured using the appropriate fixings
and positioned so that it does not interfere
with the operation of the pedals.
4. Release the seat adjustment control.
5. Operate the same seat adjustment
control in the opposite direction for at
least 3 seconds. Keep it held until the
seat stops at the mechanical end of its
travel and a click is heard.
GLASSES HOLDER
CD CHANGER
This is located in the luggage
compartment.
223
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013
English 
