2014-2022 Ford Mondeo 4 Door Keys and Remote Controls -> General Information on Radio Frequencies User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Keys and Remote Controls -> General Information on Radio Frequencies for Your Ford Mondeo 4 Door Fifth Generation (2014-2022)

Keys and Remote Controls  
Note: Further remote controls may be  
GENERAL INFORMATION ON  
programmed at this stage.  
RADIO FREQUENCIES  
4. Press any button on each additional  
remote control within 10 seconds of  
each other.  
CAUTIONS  
The radio frequency used by your  
remote control can also be used by  
other short distance radio  
Reprogramming the unlocking  
function  
transmissions (e.g. amateur radios,  
medical equipment, wireless headphones,  
remote controls and alarm systems). If the  
frequencies are jammed, you will not be  
able to use your remote control. You can  
lock and unlock the doors with the key.  
Note: When you press the unlock button  
either all the doors are unlocked or only the  
drivers door is unlocked. Pressing the unlock  
button again unlocks all the doors.  
Press and hold the unlock and lock buttons  
on the remote key simultaneously for at  
least four seconds with the ignition off. The  
direction indicators will flash twice to  
confirm the change.  
Check your vehicle is locked before  
leaving it unattended. This will  
safeguard against any potential  
malicious frequency blocking.  
To return to the original unlocking function,  
Note: You could unlock the doors if you  
press the buttons on the remote control  
unintentionally.  
The operating range between your remote  
control and your vehicle varies depending  
on the environment.  
repeat the process.  
CHANGING THE REMOTE  
CONTROL BATTERY  
Make sure that you dispose of  
old batteries in an  
PROGRAMMINGTHEREMOTE  
CONTROL  
environmentally friendly way.  
Seek advice from your local authority  
regarding recycling.  
You can program a maximum of eight  
remote controls to use with your vehicle  
(including any supplied with your vehicle).  
Programming a new remote  
control  
1. Insert the key in the ignition.  
2. Cycle the key from position 0 to II and  
then back to 0 four times within six  
seconds.  
3. Leave the key in position 0 and press  
any button on the remote control  
within 10 seconds. You will receive  
confirmation via a chime or LED that  
programming has been successful.  
29  
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013  

Related Topics

Popular Owner Manuals