Speed Limiter
PRINCIPLE OF OPERATION
WARNING
When you are going downhill, your
speed may increase above the set
speed. The system will not apply the
brakes but a warning will be given.
The system allows you to set a speed, to
which the vehicle then becomes limited.
The set speed will become the effective
maximum speed of the vehicle, but with
the option to temporarily exceed this limit
if required.
Press the SET+ switch or the SET- switch
to select your desired speed limit. The
speed is indicated in the information
display and stored as the set speed.
USING THE SPEED LIMITER
Press button B to cancel the limiter and
place it in standby mode. The information
display will confirm deactivation by
showing the set speed crossed out.
The system is operated by adjustment
controls mounted on the steering wheel.
Press button A to switch the system on
and off. The information display will
prompt for a speed to be set.
Note: The set speed limit can be
intentionally exceeded for a short period if
required, for example when overtaking.
Press the RES button to resume the
limiter. The information display will confirm
the system is active by showing the set
speed again.
Intentionally exceeding the speed
limit
Setting the speed limit
Depress the accelerator hard close to the
full pedal travel and the limit will
temporarily deactivate. The system will
reactivate once the vehicle speed drops
below the set speed.
Use the cruise control switches to alter the
maximum speed setting.
240
Mondeo (CA2) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 31-12-2014, CG3536en enGBR, Edition date: 11/2013
English 
