Get Maintenance and Specifications Guide for Ford Mustang 2 Door Fifth Generation (2005-2014)

SERVICE RECOMMENDATIONS

To help you service your vehicle, we provide scheduled maintenance

information which makes tracking routine service easy.

If your vehicle requires professional service, your authorized dealer can

provide the necessary parts and service. Check your Warranty

Guide/Customer Information Guide to find out which parts and

services are covered.

Use only recommended fuels, lubricants, fluids and service parts

conforming to specifications. Motorcraft威 parts are designed and built to

provide the best performance in your vehicle.

PRECAUTIONS WHEN SERVICING YOUR VEHICLE

• Do not work on a hot engine.

• Make sure that nothing gets caught in moving parts.

• Do not work on a vehicle with the engine running in an enclosed

space, unless you are sure you have enough ventilation.

• Keep all open flames and other burning material (such as cigarettes)

away from the battery and all fuel related parts.

Working with the engine off

1. For vehicles equipped with an automatic transmission, set the parking

brake and shift to P (Park). For vehicles equipped with a manual

transmission, set the parking brake, press and hold the clutch pedal,

place the gearshift in 1 (First), and release the clutch pedal.

2. Turn off the engine and remove the key.

3. Block the wheels.

Working with the engine on

1. For vehicles equipped with an automatic transmission, set the parking

brake and shift to P (Park). For vehicles equipped with a manual

transmission, set the parking brake, press and hold the clutch pedal,

place the gearshift in N (Neutral), and release the clutch pedal.

2. Block the wheels.

WARNING: To reduce the risk of vehicle damage and/or

personal burn injuries, do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

Maintenance and Specifications

259

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

OPENING THE HOOD

1. Inside the vehicle, pull the hood

release handle located on the

driver’s side kick panel.

2. Go to the front of the vehicle and release the auxiliary latch that is

located under the front center of

the hood.

3. Lift the hood and secure it with

the prop rod.

Maintenance and Specifications

260

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT

4.0L V6 engine

1. Battery

2. Engine oil filler cap

3. Engine oil dipstick

4. Brake fluid reservoir

5. Air filter assembly

6. Power steering fluid reservoir

7. Engine coolant reservoir

8. Windshield washer fluid reservoir

9. Power distribution box

Maintenance and Specifications

261

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

4.6L 3V V8 engine

1. Battery

2. Engine oil filler cap

3. Engine oil dipstick

4. Brake fluid reservoir

5. Air filter assembly

6. Power steering fluid reservoir

7. Engine coolant reservoir

8. Windshield washer fluid reservoir

9. Power distribution box

1 2

9 8 7

Maintenance and Specifications

262

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Engine shield

Some vehicles may be equipped

with an aero-shield under the

engine. This shield needs to be

removed for service, including oil

and filter changes. It is secured with

four screws.

WINDSHIELD WASHER FLUID

Add fluid to fill the reservoir if the

level is low. In very cold weather, do

not fill the reservoir completely.

Only use a washer fluid that meets

Ford specifications. Do not use any

special washer fluid such as

windshield water repellent type fluid

or bug wash. They may cause

squeaking, chatter noise, streaking

and smearing. Refer to

Maintenance product specifications and capacities in this chapter.

State or local regulations on volatile organic compounds may restrict the

use of methanol, a common windshield washer antifreeze additive.

Washer fluids containing non-methanol antifreeze agents should be used

only if they provide cold weather protection without damaging the

vehicle’s paint finish, wiper blades or washer system.

WARNING: If you operate your vehicle in temperatures below

40°F (5°C), use washer fluid with antifreeze protection. Failure

to use washer fluid with antifreeze protection in cold weather could

result in impaired windshield vision and increase the risk of injury or

accident.

Maintenance and Specifications

263

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

CHANGING THE WIPER BLADES

1. Pull the wiper blade and arm

away from the glass.

2. Squeeze the locking tabs to

release the blade from the arm and

pull the blade away from the arm to

remove it.

3. Attach the new blade to the arm and snap it into place.

Replace wiper blades at least once per year for optimum performance.

Poor wiper quality can be improved by cleaning the wiper blades and the

windshield. Refer to Windows and wiper blades in the Cleaning

chapter.

To prolong the life of the wiper blades, it is highly recommended to

scrape off the ice on the windshield before turning on the wipers. The

layer of ice has many sharp edges and can damage the micro edge of the

wiper rubber element.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance information for the appropriate

intervals for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait 15 minutes for the oil to drain into the

oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P

(Park) (automatic transmissions) or 1 (First) (manual transmissions).

4. Open the hood. Protect yourself from engine heat.

Maintenance and Specifications

264

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

5. Locate and carefully remove the engine oil level dipstick.

• 4.0L V6 engine

• 4.6L V8 engine

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.

• If the oil level is between the lower and upper holes, the oil level

is acceptable. DO NOT ADD OIL.

Maintenance and Specifications

265

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

• If the oil level is below the lower hole, add enough oil to raise the

level within the lower and upper holes.

• 4.0L V6 engine

• 4.6L V8 engine

• Oil levels above the upper hole may cause engine damage. Some oil

must be removed from the engine by an authorized dealer.

7. Put the dipstick back in and ensure it is fully seated.

Maintenance and Specifications

266

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

normal operating range on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

1/4 of a turn until three clicks are heard or until the cap is fully seated.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

Engine oil and filter recommendations

4.0L V6 Engine

Look for this certification

trademark.

Use SAE 5W-30 engine oil

Only use oils certified for gasoline engines by the American Petroleum

Institute (API). An oil with this trademark symbol conforms to the

current engine and emission system protection standards and fuel

economy requirements of the International Lubricant Standardization and

Approval Committee (ILSAC), comprised of U.S. and Japanese

automobile manufacturers.

To protect your engine and engine’s warranty, use Motorcraft威 SAE

5W-30 or an equivalent SAE 5W-30 oil meeting Ford specification

WSS-M2C929-A. Refer to Maintenance product specifications and

capacities later in this section for more information.

Maintenance and Specifications

267

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Do not use supplemental engine oil additives, cleaners or other engine

treatments. They are unnecessary and could lead to engine damage that

is not covered by Ford warranty.

Change your engine oil according to the appropriate schedule listed in

the scheduled maintenance information.

Ford production and Motorcraft威 replacement oil filters are designed for

added engine protection and long life. If a replacement oil filter is used

that does not meet Ford material and design specifications, start-up

engine noises or knock may be experienced.

It is recommended you use the appropriate Motorcraft威 oil filter or

another with equivalent performance for your engine application.

4.6L 3V V8 Engine

Look for this certification

trademark.

Use SAE 5W-20 engine oil

Only use oils “Certified For Gasoline Engines” by the American

Petroleum Institute (API). An oil with this trademark symbol conforms

to the current engine and emission system protection standards and fuel

economy requirements of the International Lubricant Standardization and

Approval Committee (ILSAC), comprised of U.S. and Japanese

automobile manufacturers.

To protect your engine and engine’s warranty, use Motorcraft威 SAE

5W-20 or an equivalent SAE 5W-20 oil meeting Ford specification

WSS-M2C930-A. SAE 5W-20 oil provides optimum fuel economy and

durability performance meeting all requirements for your

vehicle’s engine. Refer to Maintenance product specifications and

capacities later in this section for more information.

Do not use supplemental engine oil additives, cleaners or other engine

treatments. They are unnecessary and could lead to engine damage that

is not covered by Ford warranty.

Maintenance and Specifications

268

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Change your engine oil according to the appropriate schedule listed in

the scheduled maintenance information.

Ford production and Motorcraft威 replacement oil filters are designed for

added engine protection and long life. If a replacement oil filter is used

that does not meet Ford material and design specifications, start-up

engine noises or knock may be experienced.

It is recommended you use the appropriate Motorcraft威 oil filter or

another with equivalent performance for your engine application.

BATTERY

Your vehicle is equipped with a

Motorcraft威 maintenance-free

battery which normally does not

require additional water during its

life of service.

If your battery has a cover/shield, make sure it is reinstalled

after the battery has been cleaned or replaced.

For longer, trouble-free operation, keep the top of the battery clean and

dry. Also, make certain the battery cables are always tightly fastened to

the battery terminals.

If you see any corrosion on the battery or terminals, remove the cables

from the terminals and clean with a wire brush. You can neutralize the

acid with a solution of baking soda and water.

It is recommended that the negative battery cable terminal be

disconnected from the battery if you plan to store your vehicle for an

extended period of time. This will minimize the discharge of your battery

during storage.

Note: Electrical or electronic accessories or components added to the

vehicle by the dealer or the owner may adversely affect battery

performance and durability.

WARNING: Batteries normally produce explosive gases which

can cause personal injury. Therefore, do not allow flames, sparks

or lighted substances to come near the battery. When working near the

battery, always shield your face and protect your eyes. Always provide

proper ventilation.

Maintenance and Specifications

269

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

WARNING: When lifting a plastic-cased battery, excessive

pressure on the end walls could cause acid to flow through the

vent caps, resulting in personal injury and/or damage to the vehicle or

battery. Lift the battery with a battery carrier or with your hands on

opposite corners.

WARNING: Keep batteries out of reach of children. Batteries

contain sulfuric acid. Avoid contact with skin, eyes or clothing.

Shield your eyes when working near the battery to protect against

possible splashing of acid solution. In case of acid contact with skin or

eyes, flush immediately with water for a minimum of 15 minutes and

get prompt medical attention. If acid is swallowed, call a physician

immediately.

WARNING: Battery posts, terminals and related accessories

contain lead and lead compounds. Wash hands after handling.

Because your vehicle’s engine is electronically controlled by a computer,

some control conditions are maintained by power from the battery. When

the battery is disconnected or a new battery is installed, the engine must

relearn its idle and fuel trim strategy for optimum driveability and

performance. To begin this process:

1. With the vehicle at a complete stop, set the parking brake.

2. Put the gearshift in P (Park) (automatic transmission) or the neutral

position (manual transmission), turn off all accessories and start the

engine.

3. Run the engine until it reaches normal operating temperature.

4. Allow the engine to idle for at least one minute.

5. Turn the A/C on and allow the engine to idle for at least one minute.

6. Drive the vehicle to complete the relearning process.

• The vehicle may need to be driven 10 miles (16 km) or more to

relearn the idle and fuel trim strategy.

• If you do not allow the engine to relearn its idle trim, the idle

quality of your vehicle may be adversely affected until the idle

trim is eventually relearned.

When the battery is disconnected or a new battery installed, the

transmission must relearn its adaptive strategy. As a result of this, the

Maintenance and Specifications

270

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

transmission may shift firmly. This operation is considered normal and

will not affect function or durability of the transmission. Over time the

adaptive learning process will fully update transmission operation to its

optimum shift feel.

If the battery has been disconnected or a new battery has been installed,

the clock and the preset radio stations must be reset once the battery is

reconnected.

• Always dispose of automotive

batteries in a responsible manner.

Follow your local authorized

standards for disposal. Call your

local authorized recycling center

to find out more about recycling

automotive batteries.

ENGINE COOLANT

Checking engine coolant

The concentration and level of engine coolant should be checked at the

intervals listed in scheduled maintenance information. The coolant

concentration should be maintained at 50/50 coolant and distilled water,

which equates to a freeze point of -34°F (-36°C). Coolant concentration

testing is possible with a hydrometer or antifreeze tester. The level of

coolant should be maintained at the FULL COLD level or within the

COLD FILL RANGE in the coolant reservoir. If the level falls below, add

coolant per the instructions in the Adding engine coolant section.

Your vehicle was factory-filled with a 50/50 engine coolant and water

concentration. If the concentration of coolant falls below 40% or above

60%, the engine parts could become damaged or not work properly. A

50/50 mixture of coolant and water provides the following:

• Freeze protection down to -34°F (-36°C).

• Boiling protection up to 265°F (129°C).

• Protection against rust and other forms of corrosion.

• Proper function of calibrated gauges.

RETURN

RECYCLE

Maintenance and Specifications

271

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

When the engine is cold, check the

level of the engine coolant in the

reservoir.

• The engine coolant should be at the FULL COLD level or within the

COLD FILL RANGE as listed on the engine coolant reservoir

(depending upon application).

• Refer to scheduled maintenance information for service interval

schedules.

If the engine coolant has not been checked at the recommended interval,

the engine coolant reservoir may become low or empty. If the reservoir is

low or empty, add engine coolant to the reservoir. Refer to Adding

engine coolant in this chapter.

Note: Automotive fluids are not interchangeable; do not use engine

coolant/antifreeze or windshield washer fluid outside of its specified

function and vehicle location.

Adding engine coolant

When adding coolant, make sure it is a 50/50 mixture of engine coolant

and distilled water. Add the mixture to the coolant reservoir, when the

engine is cool, until the appropriate fill level is obtained. If coolant is

filled to the COLD FILL RANGE or FULL COLD level when the engine is

not cool, the system will remain underfilled.

WARNING: Do not add engine coolant when the engine is hot.

Steam and scalding liquids released from a hot cooling system

can burn you badly. Also, you can be burned if you spill coolant on hot

engine parts.

Maintenance and Specifications

272

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

WARNING: Do not put engine coolant in the windshield washer

fluid container. If sprayed on the windshield, engine coolant

could make it difficult to see through the windshield.

• DO NOT MIX different colors or types of coolant in your vehicle.

Make sure the correct coolant is used. DO NOT MIX recycled coolant

and new (unused) coolant together in the vehicle. Mixing of engine

coolants may harm your engine’s cooling system. The use of an

improper coolant may harm engine and cooling system components

and may void the warranty. Refer to Maintenance product

specifications and capacities in this chapter.

Note: Do not use stop leak pellets or cooling system sealants/additives

as they can cause damage to the engine cooling and/or heating systems.

This damage would not be covered under your vehicle’s warranty.

• A large amount of water without engine coolant may be added, in case

of emergency, to reach a vehicle service location. In this instance, the

cooling system must be drained and refilled with a 50/50 mixture of

engine coolant and distilled water as soon as possible. Water alone

(without engine coolant) can cause engine damage from corrosion,

overheating or freezing.

• Do not use alcohol, methanol, brine or any engine coolants

mixed with alcohol or methanol antifreeze (coolant). Alcohol

and other liquids can cause engine damage from overheating or

freezing.

• Do not add extra inhibitors or additives to the coolant. These

can be harmful and compromise the corrosion protection of the engine

coolant.

For vehicles with overflow coolant systems with a non-pressurized cap

on the coolant recovery system, add coolant to the coolant recovery

reservoir when the engine is cool. Add the proper mixture of coolant and

water to the FULL COLD level. For all other vehicles which have a

coolant degas system with a pressurized cap, or if it is necessary to

remove the coolant pressure relief cap on the radiator of a vehicle with

an overflow system, follow these steps to add engine coolant.

WARNING: To reduce the risk of personal injury, make sure the

engine is cool before unscrewing the coolant pressure relief cap.

The cooling system is under pressure; steam and hot liquid can come

out forcefully when the cap is loosened slightly.

Maintenance and Specifications

273

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Add the proper mixture of coolant and water to the cooling system by

following these steps:

1. Before you begin, turn the engine off and let it cool.

2. When the engine is cool, wrap a thick cloth around the coolant

pressure relief cap on the coolant reservoir (a translucent plastic bottle).

Slowly turn cap counterclockwise (left) until pressure begins to release.

3. Step back while the pressure releases.

4. When you are sure that all the pressure has been released, use the

cloth to turn it counterclockwise and remove the cap.

5. Fill the coolant reservoir slowly with the proper coolant mixture, to

within the COLD FILL RANGE or the FULL COLD level on the reservoir.

If you removed the radiator cap in an overflow system, fill the radiator

until the coolant is visible and radiator is almost full.

6. Replace the cap. Turn until tightly installed. Cap must be tightly

installed to prevent coolant loss.

After any coolant has been added, check the coolant concentration (refer

to Checking engine coolant). If the concentration is not 50/50

(protection to –34°F/–36°C), drain some coolant and adjust the

concentration. It may take several drains and additions to obtain a 50/50

coolant concentration.

Whenever coolant has been added, the coolant level in the coolant

reservoir should be checked the next few times you drive the vehicle. If

necessary, add enough 50/50 concentration of engine coolant and

distilled water to bring the liquid level to the proper level.

If you have to add more than 1.0 quart (1.0 liter) of engine coolant per

month, have your authorized dealer check the engine cooling system.

Your cooling system may have a leak. Operating an engine with a low

level of coolant can result in engine overheating and possible engine

damage.

Recycled engine coolant

Ford Motor Company does NOT recommend the use of recycled engine

coolant since a Ford-approved recycling process is not yet available.

Used engine coolant should be disposed of in an appropriate

manner. Follow your community’s regulations and standards for recycling

and disposing of automotive fluids.

Coolant refill capacity

To find out how much fluid your vehicle’s cooling system can hold, refer

to Maintenance product specifications and capacities in this chapter.

Maintenance and Specifications

274

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Fill your engine coolant reservoir as outlined in Adding engine coolant

in this section.

Severe climates

If you drive in extremely cold climates (less than –34°F [–36°C]):

• It may be necessary to increase the coolant concentration

above 50%.

• NEVER increase the coolant concentration above 60%.

Increased engine coolant concentrations above 60% will

decrease the overheat protection characteristics of the engine

coolant and may cause engine damage.

• Refer to the chart on the coolant container to ensure the

coolant concentration in your vehicle will provide adequate

freeze protection at the temperatures in which you drive in the

winter months.

If you drive in extremely hot climates:

• It is still necessary to maintain the coolant concentration

above 40%.

• NEVER decrease the coolant concentration below 40%.

Decreased engine coolant concentrations below 40% will

decrease the corrosion/freeze protection characteristics of the

engine coolant and may cause engine damage.

• Refer to the chart on the coolant container to ensure the

coolant concentration in your vehicle will provide adequate

protection at the temperatures in which you drive.

Vehicles driven year-round in non-extreme climates should use a 50/50

mixture of engine coolant and distilled water for optimum cooling system

and engine protection.

What you should know about fail-safe cooling (4.6L V8 engine

only)

If the engine coolant supply is depleted, this feature allows the vehicle to

be driven temporarily before incremental component damage is incurred.

The “fail-safe” distance depends on ambient temperatures, vehicle load

and terrain.

How fail-safe cooling works

If the engine begins to overheat:

• The engine coolant temperature gauge

will move to the red (hot)

area.

Maintenance and Specifications

275

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

• The engine coolant temperature indicator will illuminate.

• The service engine soon indicator light will illuminate.

If the engine reaches a preset over-temperature condition, the engine

will automatically switch to alternating cylinder operation. Each disabled

cylinder acts as an air pump and cools the engine.

When this occurs the vehicle will still operate. However:

• The engine power will be limited.

• The air conditioning system will be disabled.

Continued operation will increase the engine temperature:

• The engine will completely shut down.

• Steering and braking effort will increase.

Once the engine temperature cools, the engine can be re-started. Take

your vehicle to an authorized dealer as soon as possible to minimize

engine damage.

When fail-safe mode is activated

You have limited engine power when in the fail-safe mode, so drive the

vehicle with caution. The vehicle will not be able to maintain high speed

operation and the engine will run rough. Remember that the engine is

capable of completely shutting down automatically to prevent engine

damage, therefore:

1. Pull off the road as soon as safely possible and turn off the engine.

2. Arrange for the vehicle to be taken to an authorized dealer.

3. If this is not possible, wait a short period for the engine to cool.

4. Check the coolant level and replenish if low.

WARNING: Fail-safe mode is for use during emergencies only.

Operate the vehicle in fail-safe mode only as long as necessary to

bring the vehicle to rest in a safe location and seek immediate repairs.

When in fail-safe mode, the vehicle will have limited power, will not be

able to maintain high-speed operation, and may completely shut down

without warning, potentially losing engine power, power steering assist,

and power brake assist, which may increase the possibility of a crash

resulting in serious injury.

WARNING: Never remove the coolant reservoir cap while the

engine is running or hot.

Maintenance and Specifications

276

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

5. Restart the engine and take your vehicle to an authorized dealer.

Driving the vehicle without repairing the engine problem

increases the chance of engine damage. Take your vehicle to an

authorized dealer as soon as possible.

FUEL FILTER

For fuel filter replacement, see your authorized dealer. Refer to

scheduled maintenance information for the appropriate intervals for

changing the fuel filter.

Replace the fuel filter with an authorized Motorcraft威 part. The

customer warranty may be void for any damage to the fuel system

if an authorized Motorcraft威 fuel filter is not used.

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS

Important safety precautions

WARNING: Do not overfill the fuel tank. The pressure in an

overfilled tank may cause leakage and lead to fuel spray and fire.

WARNING: The fuel system may be under pressure. If you hear

a hissing sound near the fuel filler door (Easy Fuel™ “no cap”

fuel system), do not refuel until the sound stops. Otherwise, fuel may

spray out, which could cause serious personal injury.

WARNING: Automotive fuels can cause serious injury or death

if misused or mishandled.

WARNING: Gasoline may contain benzene, which is a

cancer-causing agent.

Observe the following guidelines when handling automotive fuel:

• Extinguish all smoking materials

and any open flames before

refueling your vehicle.

• Always turn off the vehicle before

refueling.

• Automotive fuels can be harmful

or fatal if swallowed. Fuel such as gasoline is highly toxic and if

Maintenance and Specifications

277

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

swallowed can cause death or permanent injury. If fuel is swallowed,

call a physician immediately, even if no symptoms are immediately

apparent. The toxic effects of fuel may not be visible for hours.

• Avoid inhaling fuel vapors. Inhaling too much fuel vapor of any kind

can lead to eye and respiratory tract irritation. In severe cases,

excessive or prolonged breathing of fuel vapor can cause serious

illness and permanent injury.

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,

remove contact lenses (if worn), flush with water for 15 minutes and

seek medical attention. Failure to seek proper medical attention could

lead to permanent injury.

• Fuels can also be harmful if absorbed through the skin. If fuel is

splashed on the skin and/or clothing, promptly remove contaminated

clothing and wash skin thoroughly with soap and water. Repeated or

prolonged skin contact with fuel liquid or vapor causes skin irritation.

• Be particularly careful if you are taking “Antabuse” or other forms of

disulfiram for the treatment of alcoholism. Breathing gasoline vapors,

or skin contact could cause an adverse reaction. In sensitive

individuals, serious personal injury or sickness may result. If fuel is

splashed on the skin, promptly wash skin thoroughly with soap and

water. Consult a physician immediately if you experience an adverse

reaction.

WARNING: When refueling always shut the engine off and

never allow sparks or open flames near the filler neck. Never

smoke while refueling. Fuel vapor is extremely hazardous under certain

conditions. Care should be taken to avoid inhaling excess fumes.

WARNING: The flow of fuel through a fuel pump nozzle can

produce static electricity, which can cause a fire if fuel is

pumped into an ungrounded fuel container.

Maintenance and Specifications

278

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Refueling

WARNING: Fuel vapor burns violently and a fuel fire can cause

severe injuries. To help avoid injuries to you and others:

• Read and follow all the instructions on the pump island;

• Turn off your engine when you are refueling;

• Do not smoke if you are near fuel or refueling your vehicle;

• Keep sparks, flames and smoking materials away from fuel;

• Stay outside your vehicle and do not leave the fuel pump unattended

when refueling your vehicle — this is against the law in some places;

• Keep children away from the fuel pump; never let children pump

fuel.

• Do not use personal electronic devices while refueling. It can ignite

fuel vapors.

Use the following guidelines to avoid electrostatic charge build-up when

filling an ungrounded fuel container:

• Place approved fuel container on the ground.

• DO NOT fill a fuel container while it is in the vehicle (including the

cargo area).

• Keep the fuel pump nozzle in contact with the fuel container while

filling.

• DO NOT use a device that would hold the fuel pump handle in the fill

position.

Easy Fuel™ “no cap” fuel system

Your fuel tank is equipped with an Easy Fuel™ “no cap” fuel filler

system. This allows you to simply open the fuel filler door and insert the

fuel filler nozzle into the fuel system. The Easy Fuel™ system is

self-sealing and protected against dust, dirt, water and snow/ice.

When fueling your vehicle:

1. Turn the engine off.

2. Open the fuel filler door.

3. Slowly insert the fuel filler nozzle fully into the fuel system. Pump fuel

as normal.

4. After you are done pumping fuel, wait about five seconds before

slowly removing the fuel filler nozzle. This allows residual fuel to drain

back into the fuel tank and not spill onto the vehicle.

Maintenance and Specifications

279

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Note: A fuel spillage concern may occur if overfilling the fuel tank. Do

not overfill the tank to the point that the fuel is able to bypass the fuel

filler nozzle. The overfilled fuel may run down the drain located within

the fuel filler housing and to the ground.

If the check fuel fill inlet light or CHECK FUEL FILL INLET message

comes on, the fuel fill inlet may not have properly closed. The inlet may

have stuck open or debris may be preventing the inlet from fully closing.

At the next opportunity, safely pull off the road, turn off the engine,

open the fuel filler door and remove any visible debris from the fuel fill

opening. Insert either the fuel fill nozzle or the fuel fill funnel (see

Refilling with a portable fuel container for funnel location) provided

with the vehicle several times to dislodge any debris and/or allow the

inlet to close properly. If this action corrects the problem, the check fuel

fill inlet light or CHECK FUEL FILL INLET message may not reset

immediately. It may take several driving cycles for the check fuel fill inlet

light or CHECK FUEL FILL INLET message to turn off. A driving cycle

consists of an engine start-up (after four or more hours with the engine

off) followed by city/highway driving. Continuing to drive with the check

fuel fill inlet light or CHECK FUEL FILL INLET message on may cause

the service engine soon lamp to turn on as well.

WARNING: The fuel system may be under pressure. If you hear

a hissing sound near the fuel filler door (Easy Fuel™ “no cap”

fuel system), do not refuel until the sound stops. Otherwise, fuel may

spray out, which could cause serious personal injury.

Choosing the right fuel

Use only UNLEADED fuel or UNLEADED fuel blended with a maximum

of 10% ethanol. Do not use fuel ethanol (E85), diesel, methanol, leaded

fuel or any other fuel. The use of leaded fuel is prohibited by law and

could damage your vehicle.

Maintenance and Specifications

280

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Your vehicle was not designed to use fuel or fuel additives with metallic

compounds, including manganese-based additives.

Note: Use of any fuel other than those recommended may cause

powertrain damage, a loss of vehicle performance, and repairs may not

be covered under warranty.

Octane recommendations

Your vehicle is designed to use

“Regular” unleaded gasoline with a

pump (R+M)/2 octane rating of 87.

Some stations offer fuels posted as

“Regular” with an octane rating

below 87, particularly in high altitude areas. Fuels with octane levels

below 87 are not recommended.

Do not be concerned if your engine sometimes knocks lightly. However, if

it knocks heavily under most driving conditions while you are using fuel

with the recommended octane rating, see your authorized dealer to

prevent any engine damage.

Octane recommendations (4.6L V8 engine)

Your vehicle will run normally on 87 octane regular fuel without

damaging the engine, but premium fuel with an octane rating of 91

(R+M)/2 or higher is recommended for best overall performance.

For Shelby GT500 octane requirements, see the Shelby GT500

Supplement.

Fuel quality

If you are experiencing starting, rough idle or hesitation driveability

problems during a cold start, try a different brand of “Regular” unleaded

gasoline. Premium unleaded gasoline is not recommended for vehicles

designed to use “Regular” unleaded gasoline because it may cause these

problems to become more pronounced. If the problems persist, see your

authorized dealer.

Do not add aftermarket fuel additive products to your fuel tank. It

should not be necessary to add any aftermarket products to your fuel

tank if you continue to use high quality fuel of the recommended octane

rating. These products have not been approved for your engine and

could cause damage to the fuel system. Repairs to correct the effects of

using an aftermarket product in your fuel may not be covered by your

warranty.

Many of the world’s automakers approved the World-Wide Fuel Charter

that recommends gasoline specifications to provide improved

(R+M)/2 METHOD

Maintenance and Specifications

281

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

performance and emission control system protection for your vehicle.

Gasolines that meet the World-Wide Fuel Charter should be used when

available. Ask your fuel supplier about gasolines that meet the

World-Wide Fuel Charter.

Cleaner air

Ford endorses the use of reformulated “cleaner-burning” gasolines to

improve air quality, per the recommendations in the Choosing the right

fuel section.

Running out of fuel

Avoid running out of fuel because this situation may have an adverse

effect on powertrain components.

If you have run out of fuel:

• You may need to cycle the ignition from off to on several times after

refueling to allow the fuel system to pump the fuel from the tank to

the engine. On restarting, cranking time will take a few seconds longer

than normal.

• Normally, adding 1 gallon (3.8L) of fuel is enough to restart the

engine. If the vehicle is out of fuel and on a steep grade, more than

1 gallon (3.8L) may be required.

• The service engine soon

indicator may come on. For more

information on the service engine soon indicator, refer to Warning

lights and chimes in the Instrument Cluster chapter.

Refilling with a portable fuel container

With the Easy Fuel™ “no cap” fuel system, use the following directions

when filling from a portable fuel container:

WARNING: Do not insert the nozzle of portable fuel containers

or aftermarket funnels into the Easy Fuel™ system. This could

damage the fuel system and its seal, and may cause fuel to run onto

the ground instead of filling the tank, which could result in serious

personal injury.

WARNING: Do not try to pry open or push open the Easy

Fuel™ system with foreign objects. This could damage the fuel

system and its seal and cause injury to you or others.

When filling the vehicle’s fuel tank from a portable fuel container, use the

funnel included with the vehicle.

Maintenance and Specifications

282

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

1. Locate the white plastic funnel. It

is included with the tire changing

tools. (For vehicles equipped with

the temporary mobility kit, the

funnel is located in the spare tire

well in the trunk).

2. Slowly insert the funnel into the Easy Fuel™ system.

3. Fill the vehicle with fuel from the portable fuel container.

4. When done, clean the funnel or properly dispose of it. Extra funnels

can be purchased from your authorized dealer if you choose to dispose

of the funnel. Do not use aftermarket funnels; they will not work with

the Easy Fuel™ system and can damage it. The included funnel has

been specially designed to work safely with your vehicle.

ESSENTIALS OF GOOD FUEL ECONOMY

Measuring techniques

Your best source of information about actual fuel economy is you, the

driver. You must gather information as accurately and consistently as

possible. Fuel expense, frequency of fill-ups or fuel gauge readings are

NOT accurate as a measure of fuel economy. We do not recommend

taking fuel economy measurements during the first 1,000 miles

(1,600 km) of driving (engine break-in period). You will get a more

accurate measurement after 2,000 miles–3,000 miles

(3,000 km–5,000 km).

Filling the tank

The advertised fuel capacity of the fuel tank on your vehicle is equal to

the rated refill capacity of the fuel tank as listed in the Maintenance

product specifications and capacities section of this chapter.

The advertised capacity is the amount of the indicated capacity and the

empty reserve combined. Indicated capacity is the difference in the

amount of fuel in a full tank and a tank when the fuel gauge indicates

empty. Empty reserve is the small amount of fuel remaining in the fuel

tank after the fuel gauge indicates empty.

Maintenance and Specifications

283

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

The amount of usable fuel in the empty reserve varies and should

not be relied upon to increase driving range. When refueling your

vehicle after the fuel gauge indicates empty, you might not be

able to refuel the full amount of the advertised capacity of the

fuel tank due to the empty reserve still present in the tank.

For consistent results when filling the fuel tank:

• Turn the engine/ignition switch to the off position prior to refueling,

an error in the reading will result if the engine is left running.

• Use the same filling rate setting (low — medium — high) each time

the tank is filled.

• Allow no more than two automatic click-offs when filling.

• Always use fuel with the recommended octane rating.

• Use a known quality gasoline, preferably a national brand.

• Use the same side of the same pump and have the vehicle facing the

same direction each time you fill up.

• Have the vehicle loading and distribution the same every time.

Your results will be most accurate if your filling method is consistent.

Calculating fuel economy

1. Fill the fuel tank completely and record the initial odometer reading

(in miles or kilometers).

2. Each time you fill the tank, record the amount of fuel added (in

gallons or liters).

3. After at least three to five tank fill-ups, fill the fuel tank and record

the current odometer reading.

4. Subtract your initial odometer reading from the current odometer

reading.

5. Follow one of the simple calculations in order to determine fuel

economy:

Calculation 1: Divide total miles traveled by total gallons used.

Calculation 2: Multiply liters used by 100, then divide by total

kilometers traveled.

Keep a record for at least one month and record the type of driving (city

or highway). This will provide an accurate estimate of the vehicle’s fuel

economy under current driving conditions. Additionally, keeping records

during summer and winter will show how temperature impacts fuel

economy. In general, lower temperatures give lower fuel economy.

Maintenance and Specifications

284

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Driving style — good driving and fuel economy habits

Give consideration to the lists that follow and you may be able to change

a number of variables and improve your fuel economy.

Habits

• Smooth, moderate operation can yield up to 10% savings in fuel.

• Steady speeds without stopping will usually give the best fuel

economy.

• Idling for long periods of time (greater than one minute) may waste

fuel.

• Anticipate stopping; slowing down may eliminate the need to stop.

• Sudden or hard accelerations may reduce fuel economy.

• Slow down gradually.

• Driving at reasonable speeds (traveling at 55 mph [88 km/h] uses 15%

less fuel than traveling at 65 mph [105 km/h]).

• Revving the engine before turning it off may reduce fuel economy.

• Using the air conditioner or defroster may reduce fuel economy.

• You may want to turn off the speed control in hilly terrain if

unnecessary shifting between the top gears occurs. Unnecessary

shifting of this type could result in reduced fuel economy.

• Warming up a vehicle on cold mornings is not required and may

reduce fuel economy.

• Resting your foot on the brake pedal while driving may reduce fuel

economy.

• Combine errands and minimize stop-and-go driving.

Maintenance

• Keep tires properly inflated and use only recommended size.

• Operating a vehicle with the wheels out of alignment will reduce fuel

economy.

• Use recommended engine oil. Refer to Maintenance product

specifications and capacities in this chapter.

• Perform all regularly scheduled maintenance items. Follow the

recommended maintenance schedule and owner maintenance checks

found in scheduled maintenance information.

Conditions

• Heavily loading a vehicle or towing a trailer may reduce fuel economy

at any speed.

Maintenance and Specifications

285

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

• Carrying unnecessary weight may reduce fuel economy (approximately

1 mpg [0.4 km/L] is lost for every 400 lb [180 kg] of weight carried).

• Adding certain accessories to your vehicle (for example bug

deflectors, rollbars/light bars, running boards, ski racks) may reduce

fuel economy.

• Using fuel blended with alcohol may lower fuel economy.

• Fuel economy may decrease with lower temperatures during the first

8–10 miles (12–16 km) of driving.

• Driving on flat terrain offers improved fuel economy as compared to

driving on hilly terrain.

• Transmissions give their best fuel economy when operated in the top

cruise gear and with steady pressure on the gas pedal.

• Close windows for high speed driving.

EPA fuel economy estimates

Every new vehicle should have a sticker on the window called the

Monroney Label which contains EPA fuel economy estimates. Contact

your authorized dealer if the Monroney Label is not supplied with your

vehicle. The EPA fuel economy estimates should be your guide for the

fuel economy comparisons with other vehicles. Your fuel economy may

vary depending upon the method of operation and conditions.

EMISSION CONTROL SYSTEM

Your vehicle is equipped with various emission control components and a

catalytic converter which will enable your vehicle to comply with

applicable exhaust emission standards. To make sure that the catalytic

converter and other emission control components continue to work

properly:

• Use only the specified fuel listed.

• Avoid running out of fuel.

• Do not turn off the ignition while your vehicle is moving, especially at

high speeds.

• Have the items listed in scheduled maintenance information

performed according to the specified schedule.

The scheduled maintenance items listed in scheduled maintenance

information are essential to the life and performance of your vehicle

and to its emissions system.

If other than Ford, Motorcraft威 or Ford-authorized parts are used for

maintenance replacements or for service of components affecting

Maintenance and Specifications

286

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

emission control, such non-Ford parts should be equivalent to genuine

Ford Motor Company parts in performance and durability.

WARNING: Do not park, idle, or drive your vehicle in dry grass

or other dry ground cover. The emission system heats up the

engine compartment and exhaust system, which can start a fire.

Illumination of the service engine soon

indicator, charging system

warning light or the temperature warning light, fluid leaks, strange odors,

smoke or loss of engine power could indicate that the emission control

system is not working properly.

An improperly operating or damaged exhaust system may allow exhaust

to enter the vehicle. Have a damaged or improperly operating exhaust

system inspected and repaired immediately.

WARNING: Exhaust leaks may result in entry of harmful and

potentially lethal fumes into the passenger compartment.

Do not make any unauthorized changes to your vehicle or engine. By

law, vehicle owners and anyone who manufactures, repairs, services,

sells, leases, trades vehicles, or supervises a fleet of vehicles are not

permitted to intentionally remove an emission control device or prevent

it from working. Information about your vehicle’s emission system is on

the Vehicle Emission Control Information Decal located on or near the

engine. This decal also lists engine displacement.

Please consult your Warranty Guide/Customer Information Guide for

complete emission warranty information.

On-board diagnostics (OBD-II)

Your vehicle is equipped with a computer that monitors the engine’s

emission control system. This system is commonly known as the

on-board diagnostics system (OBD-II). The OBD-II system protects the

environment by ensuring that your vehicle continues to meet

government emission standards. The OBD-II system also assists your

authorized dealer in properly servicing your vehicle. When the service

engine soon

indicator illuminates, the OBD-II system has detected

a malfunction. Temporary malfunctions may cause the service engine

soon

indicator to illuminate. Examples are:

1. The vehicle has run out of fuel—the engine may misfire or run poorly.

2. Poor fuel quality or water in the fuel—the engine may misfire or run

poorly.

Maintenance and Specifications

287

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

3. The fuel fill inlet may not have been properly closed. See Easy Fuel™

“no cap” fuel system in this chapter.

4. Driving through deep water—the electrical system may be wet.

These temporary malfunctions can be corrected by filling the fuel tank

with good quality fuel, properly closing the fuel fill inlet or letting the

electrical system dry out. After three driving cycles without these or any

other temporary malfunctions present, the service engine soon

indicator should stay off the next time the engine is started. A driving

cycle consists of a cold engine startup followed by mixed city/highway

driving. No additional vehicle service is required.

If the service engine soon

indicator remains on, have your vehicle

serviced at the first available opportunity. Although some malfunctions

detected by the OBD-II may not have symptoms that are apparent,

continued driving with the service engine soon

indicator on can

result in increased emissions, lower fuel economy, reduced engine and

transmission smoothness, and lead to more costly repairs.

Readiness for Inspection/Maintenance (I/M) testing

Some state/provincial and local governments may have

Inspection/Maintenance (I/M) programs to inspect the emission control

equipment on your vehicle. Failure to pass this inspection could prevent

you from getting a vehicle registration. Your vehicle may not pass the I/M

test if the service engine soon

indicator is on or not working

properly (bulb is burned out), or if the OBD-II system has determined

that some of the emission control systems have not been properly

checked. In this case, the vehicle is considered not ready for I/M testing.

If the service engine soon

indicator is on or the bulb does not

work, the vehicle may need to be serviced. Refer to On-board

diagnostics (OBD-II) in this chapter.

If the vehicle’s engine or transmission has just been serviced, or the

battery has recently run down or been replaced, the OBD-II system may

indicate that the vehicle is not ready for I/M testing. To determine if the

vehicle is ready for I/M testing, turn the ignition key to the on position

for 15 seconds without cranking the engine. If the service engine

soon

indicator blinks eight times, it means that the vehicle is not

ready for I/M testing; if the service engine soon

indicator stays on

solid, it means that the vehicle is ready for I/M testing.

The OBD-II system is designed to check the emission control system

during normal driving. A complete check may take several days. If the

Maintenance and Specifications

288

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

vehicle is not ready for I/M testing, the following driving cycle consisting

of mixed city and highway driving may be performed:

15 minutes of steady driving on an expressway/highway followed by

20 minutes of stop-and-go driving with at least four 30-second idle

periods.

Allow the vehicle to sit for at least eight hours without starting the

engine. Then, start the engine and complete the above driving cycle. The

engine must warm up to its normal operating temperature. Once started,

do not turn off the engine until the above driving cycle is complete. If

the vehicle is still not ready for I/M testing, the above driving cycle will

have to be repeated.

POWER STEERING FLUID

Check the power steering fluid.

Refer to the scheduled maintenance

guide for the service interval

schedules.

1. Start the engine and let it run

until it reaches normal operating

temperature (the engine coolant

temperature gauge indicator will be

near the center of the normal area

between H and C).

2. While the engine idles, turn the

steering wheel to its furthest point

(until it stops) left and right several

times.

3. Turn the engine off.

4. Check the fluid level in the

reservoir. It should be between the

MIN and MAX lines. Do not add

fluid if the level is in this range.

5. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the range between the MIN and MAX lines. Be

sure to put the cap back on the reservoir. Refer to Maintenance

product specifications and capacities in this chapter for the proper

fluid type.

BRAKE/CLUTCH FLUID

Brake and clutch systems are supplied from the same reservoir.

Maintenance and Specifications

289

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

The fluid level will drop slowly as

the brakes wear, and will rise when

the brake components are replaced.

Fluid levels between the MIN and

MAX lines are within the normal

operating range; there is no need to

add fluid. If the fluid levels are

outside of the normal operating

range, the performance of the

system could be compromised; seek

service from your authorized dealer

immediately.

TRANSMISSION FLUID

Checking automatic transmission fluid

The 5R55S transmission does not have a transmission fluid dipstick.

Refer to your scheduled maintenance information for scheduled

intervals for fluid checks and changes. Your transmission does not

consume fluid. However, the fluid level should be checked if the

transmission is not working properly, i.e., if the transmission slips or

shifts slowly or if you notice some sign of fluid leakage.

Transmission fluid should be checked and, if required, fluid

should be added by an authorized dealer.

Before adding any fluid, make sure the correct type is used. Use only

MERCON威 V automatic transmission fluid. The type of fluid used is

indicated on the transmission fluid pan, extension housing. Refer to

Maintenance product specifications and capacities in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage and void the warranty.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

Maintenance and Specifications

290

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Checking and adding manual transmission fluid (if equipped)

1. Clean the filler plug.

2. Remove the filler plug and inspect the fluid level.

3. Note: There are two different manual transmissions used in this

vehicle and they have different fluid levels. For vehicles equipped with a

V6 engine, the correct manual transmission fill level is at the lower edge

of the filler hole. For vehicles equipped with a V8 engine, the correct

manual transmission fill level is 1/2 inch (1.3 cm) below the edge of the

filler : For vehicles equipped with a V6 engine, the correct

manual transmission fill level is at the lower edge of the filler hole. For

vehicles equipped with a V8 engine, the correct manual transmission fill

level is 1/2 inch (1.3 cm) below the edge of the filler hole.

Maintenance and Specifications

291

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

• Fill level for V6

• Fill level for V8

4. Add enough fluid through the filler opening to bring the fluid up to

the recommended levels.

5. Install and tighten the fill plug securely.

Use only fluid that meets Ford specifications. Refer to Maintenance

product specifications and capacities in this chapter.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the air filter element

listed. Refer to Motorcraft威 part numbers in this chapter.

WARNING: To reduce the risk of vehicle damage and/or

personal burn injuries do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

Maintenance and Specifications

292

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Changing the air filter element

V6 engine

V8 engine

1. Release the clamps that secure the air filter housing cover.

2. Remove the air filter element from the air filter housing.

3. Wipe the air filter housing and cover clean to remove any dirt or

debris and to ensure good sealing.

4. Install a new air filter element. Be careful not to crimp the filter

element edges between the air filter housing and cover. This could cause

filter damage and allow unfiltered air to enter the engine if not properly

seated.

5. Replace the air filter housing cover and secure the clamps. Be sure

that the air cleaner cover tabs are engaged into the slots of the air

cleaner housing.

Note: Failure to use the correct air filter element may result in severe

engine damage. The customer warranty may be void for any damage to

the engine if the correct air filter element is not used.

Maintenance and Specifications

293

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

MOTORCRAFT PART NUMBERS

Component 4.0L V6 engine 4.6L V8 engine

Air filter element FA-1773 FA-1897

Fuel filter FG-1083 FG-1083

Battery BXT-96R BXT-96R

Oil filter FL-820-S FL-820-S

Spark Plugs

For spark plug replacement, see your authorized dealer. Refer to

scheduled maintenance information for the appropriate intervals for

changing the spark plugs.

Replace the spark plugs with ones that meet Ford material and

design specifications for your vehicle, such as Motorcraft威 or

equivalent replacement parts. The customer warranty may be

void for any damage to the engine if such spark plugs are not

used.

Maintenance and Specifications

294

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES

Item Capacity

Ford part name or

equivalent

Ford part number /

Ford Specification

Brake fluid and (clutch

fluid-if equipped)

Between MIN and

MAX lines on

reservoir

Motorcraft威 High

Performance DOT 3

Motor Vehicle Brake

Fluid

PM-1-C /

WSS-M6C62-A or

WSS-M6C65-A1

Door weatherstrips — Silicone Lubricant

XL-6 /

ESR-M13P4-A

Door latch, hood latch,

auxiliary hood latch,

striker plates, seat

tracks and fuel filler

door hinge

— Multi-Purpose Grease

XG-4 or XL-5 /

ESB-M1C93-B

Engine coolant

(4.0L engine)

12.5 quarts

(11.8L)

Motorcraft威 Premium

Gold Engine Coolant

with bittering agent

(yellow-colored)

VC-7-B /

WSS-M97B51-A1

Engine coolant

(4.6L engine)

13.6 quarts

(12.9L)

Cooling system stop

leak pellets

—

Motorcraft威 Cooling

System Stop Leak

Pellets

VC-6 /

WSS-M99B37-B6

Maintenance and Specifications

295

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Item Capacity

Ford part name or

equivalent

Ford part number /

Ford Specification

Engine oil

(4.0L engine)

5.0 quarts (4.7L)

•Motorcraft威 SAE 5W-30

Premium Synthetic

Blend Motor Oil (US)

•Motorcraft威 SAE 5W-30

Full Synthetic Motor Oil

(US)

•Motorcraft威 SAE 5W-30

Super Premium Motor

Oil (Canada)

•Motorcraft威 SAE 5W-30

Synthetic Motor Oil

(Canada)

•XO-5W30-QSP (US)

•XO-5W-30-QFS (US)

•CXO-5W30-LSP12

(Canada)

•CXO-5W30-LFS12

(Canada) /

WSS-M2C929-A and API

Certification Mark

Engine oil

(4.6L engine)

6.0 quarts (5.7L)

•Motorcraft威 SAE 5W-20

Premium Synthetic

Blend Motor Oil (US)

•Motorcraft威 SAE 5W-20

Full Synthetic Motor Oil

(US)

•Motorcraft威 SAE 5W-20

Super Premium Motor

Oil (Canada)

•Motorcraft威 SAE 5W-20

Synthetic Motor Oil

(Canada)

•XO-5W20-QSP (US)

•XO-5W20-QFS (US)

•CXO-5W20-LSP12

(Canada)

•CXO-5W20-LFS12

(Canada) /

WSS-M2C930-A with API

Certification Mark

Maintenance and Specifications

296

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Item Capacity

Ford part name or

equivalent

Ford part number /

Ford Specification

Lock cylinders —

Motorcraft威 Penetrating

and Lock Lubricant

XL-1 /

None

Power steering fluid

Fill to between

MIN and MAX

lines on reservoir

Motorcraft威

MERCON威 VATF

XT-5-QM /

MERCON威 V

Rear axle fluid 7.5 inch

axle

(4.0L engine)

3.25 pints (1.5L)

Motorcraft威 SAE

75W-140 Synthetic Rear

Axle Lubricant

XY-75W140-QL /

WSP-M2C192-A

Rear axle fluid 8.8 inch

axle

(4.6L engine)

4.25 pints (2.0L)

Automatic transmission

fluid

11.9 quarts

(11.2L)

Motorcraft威

MERCON威 VATF

XT-5-QM /

MERCON威 V

Manual transmission

fluid

(4.0L engine)

2.75 quarts

(2.6L)

Motorcraft威

MERCON威 VATF

XT-5-QM /

MERCON威 V

Manual transmission

fluid

(4.6L engine)

3.2 quarts (3.0L)

Maintenance and Specifications

297

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Item Capacity

Ford part name or

equivalent

Ford part number /

Ford Specification

Windshield washer fluid 3.6 quarts (3.4L)

Motorcraft威 Premium

Windshield Washer

Concentrate

ZC-32-A /

WSB-M8B16-A2

Fuel tank

16.0 gallons

(60.6L)

——

Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification

EST-M2C118-A for complete refill of Traction-Lok axles.

Ford design rear axles contain a synthetic lubricant that does not require changing unless the axle

has been submerged in water.

Automatic transmissions that require MERCON威 V should only use MERCON威 V fluid. Refer to

scheduled maintenance information to determine the correct service interval. Use of any fluid

other than the recommended fluid may cause transmission damage.

Add the coolant type originally equipped in your vehicle.

Approximate dry capacity, including cooler and tubes. Fluid level should be checked by an

authorized dealer.

Service refill capacity is covered under Checking and adding manual transmission fluid in this

chapter.

Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the

requirements of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (4.6L) and the API

Certification mark.

Maintenance and Specifications

298

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

ENGINE DATA

Engine 4.0L V6 engine 4.6L V8 engine

Cubic inches 245 281

Required fuel 87 octane 87 octane

Firing order 1-4-2-5-3-6 1-3-7-2-6-5-4-8

Ignition system EDIS Coil on plug

Spark plug gap 0.052–0.056 inch

(1.32–1.42 mm)

0.039–0.043 inch

(1.0–1.1 mm)

Compression ratio 9.7:1 9.8:1

For Shelby GT500 octane requirements, see the Shelby GT500

Supplement.

Engine drivebelt routing

• 4.0L V6 Engine

• 4.6L V8 Engine

Maintenance and Specifications

299

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

IDENTIFYING YOUR VEHICLE

Safety Compliance Certification Label

The National Highway Traffic Safety

Administration Regulations require

that a Safety Compliance

Certification Label be affixed to a

vehicle and prescribe where the

Safety Compliance Certification

Label may be located. The Safety

Compliance Certification Label is

located on the structure (B-Pillar)

by the trailing edge of the driver’s

door or the edge of the driver’s

door.

Vehicle identification number (VIN)

The vehicle identification number is

located on the driver side

instrument panel.

Please note that in the graphic,

XXXX is representative of your

vehicle identification number.

XXXXXXXXXXXXXXXXX

Maintenance and Specifications

300

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

The Vehicle Identification Number (VIN) contains the following

information:

1. World manufacturer identifier

2. Brake system / Gross Vehicle

Weight Rating (GVWR) / Restraint

Devices and their location

3. Make, vehicle line, series, body

type

4. Engine type

5. Check digit

6. Model year

7. Assembly plant

8. Production sequence number

TRANSMISSION CODE DESIGNATIONS

You can find a transmission code on

the Safety Compliance Certification

Label. The following table tells you

which transmission each code

represents.

Description Code

Five-speed manual (T5) F

Five-speed manual (TR3650) K

Five-speed automatic (5R55S) L

Maintenance and Specifications

301

2010 05+ Mustang (197)

Owners Guide, 3rd Printing

USA (fus)

Maintenance and Specifications for Your Ford Mustang 2 Door Fifth Generation (2005-2014)

Related Topics

Popular Owner Manuals

Latest Owner Manuals