Ask on Exit (If Equipped)
You can set the information display to ask
you each time which level of guard you
wish to set.
Using the information display controls, scroll to:
Action and DescriptionMessage
Press the OK button.Settings
Press the OK button.Vehicle settings
Press the OK button.Alarm
Press the OK button.Ask on exit
Appears in the information display each time you switch your
vehicle off.
Reduced guard
If you wish to arm the alarm with reduced guard, press the
OK button when this message appears.
If you wish to arm the alarm with full guard, leave your vehicle
without pressing the OK button.
Note: Selecting reduced guard does not set the alarm permanently to reduced guard. It
sets it to reduced guard only for the current locking cycle.
Arming the Alarm
To arm the alarm, lock your vehicle. See
Doors and Locks (page 38).
Disarming the Alarm
Disarm and silence the alarm by unlocking
the doors and switching your vehicle on or
unlocking the doors with the remote
control.
Note: A valid passive key must be located
within the detection range of that door for
keyless entry. See Keyless Entry (page 41).
ANTI-THEFT ALARM -
VEHICLES WITH: PERIMETER
ALARM
The perimeter alarm is a deterrent against
unauthorized access to your vehicle
through the doors and the hood. It also
protects the audio unit.
If the alarm is triggered, the alarm horn will
sound and the hazard warning flasher will
flash.
Take all remote controls to an authorized
dealer if there is any potential alarm
problem with your vehicle.
Arming the Alarm
To arm the alarm, lock your vehicle. See
Doors and Locks (page 38).
Disarming the Alarm
Disarm and silence the alarm by unlocking
the doors and switching your vehicle on or
unlocking the doors with the remote
control.
Note: A valid passive key must be located
within the detection range of that door for
keyless entry. See Keyless Entry (page 41).
47
Mustang (CZG) Australia, Vehicles Built From: 07-08-2017, JR3J 19A321 ZAB enAUS, Edition date: 201709, Second Printing
Security