MANUALLY SHIFTING GEARS
Shifting Using the Paddle Shifters
(If Equipped)
The instrument cluster displays the current
gear. The current gear flashes when your
vehicle cannot shift into the requested
gear. Your vehicle does not shift if the
requested gear raises or lowers the engine
speed beyond the limit.
Your vehicle could shift when you fully
press the accelerator or brake pedal.
Note: Prolonged driving with high engine
speed could cause vehicle damage not
covered by the vehicle warranty.
Note: Drive modes could affect when the
vehicle shifts into the requested gear.
Manually Shifting Gears in Drive (D)
Use this feature to temporarily change
gears.
Note: We recommend using this feature for
engine braking or driving on hilly or
mountainous roads.
• Pull either paddle to switch the feature
on.
• Pull the right (+) paddle to upshift.
• Pull the left (-) paddle to downshift.
• Hold the right (+) paddle for a few
seconds to switch the feature off.
Note: The feature switches off after a short
period of time if neither paddle is pulled.
Manually Shifting Gears in Manual (M)
Use this feature to select a specific gear.
Note: We recommend using this feature for
engine braking, driving on hilly or
mountainous roads, or when towing a trailer.
See Towing a Trailer (page 260).
• Shift to manual (M) or with the selector
in drive (D) press the manual (M)
button to switch the feature on.
• Pull the right (+) paddle to upshift.
• Pull the left (-) paddle to downshift.
• Shift to drive (D) or press the manual
(M) button again to switch the feature
off.
SHIFTING YOUR IMMOBILE
VEHICLE OUT OF PARK (P)
WARNING: When doing this
procedure, you need to take your vehicle
out of park (P) which means your vehicle
can roll freely. To avoid unwanted
vehicle movement, apply the parking
brake prior to doing this procedure. Use
wheels chocks if appropriate.
WARNING: If the parking brake is
fully released, but the brake warning
lamp remains illuminated, the brakes
may not be working properly. Have your
vehicle checked as soon as possible.
WARNING: Do not drive your
vehicle until you verify that the
stoplamps are working.
Use this procedure to shift your vehicle out
of park (P) in the event of an electrical
malfunction or emergency.
Shifting Your Vehicle Out of Park
1. Apply the parking brake.
162
Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM
Automatic Transmission