Get Front Seats Guide for Ford Mustang 2 Door Seventh Generation (2024-2026)

FRONT SEAT PRECAUTIONS

WARNING: Sitting improperly, out

of position or with the seatback reclined

too far can take weight off the seat

cushion and affect the decision of the

passenger sensing system, resulting in

serious injury or death in the event of a

crash. Always sit upright against your

seat back, with your feet on the floor.

WARNING: Do not recline the seat

backrest too far as this can cause the

occupant to slide under the seatbelt,

resulting in personal injury in the event

of a crash.

WARNING: Do not place objects

higher than the top of the seat backrest.

Failure to follow this instruction could

result in personal injury or death in the

event of a sudden stop or crash.

WARNING: Do not adjust the driver

seat or seat backrest when your vehicle

is moving. This may result in sudden seat

movement, causing the loss of control

of your vehicle.

SITTING IN THE CORRECT

POSITION

E68595

When you use them properly, the seat,

head restraint, seatbelt and airbags will

provide optimum protection in the event

of a crash.

We recommend that you follow these

guidelines:

• Sit in an upright position with the base

of your spine as far back as possible.

• Do not recline the seat backrest so that

your torso is more than 30 degrees

from the upright position.

• Adjust the head restraint so that the

top of it is level with the top of your

head and as far forward as possible.

Make sure that you remain

comfortable.

• Keep sufficient distance between

yourself and the steering wheel. We

recommend a minimum of 10 in

(25 cm) between your breastbone and

the airbag cover.

• Hold the steering wheel with your arms

slightly bent.

113

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Front Seats

• Bend your legs slightly so that you can

press the pedals fully.

• Position the shoulder strap of the

seatbelt over the center of your

shoulder and position the lap strap

tightly across your hips.

Make sure that your driving position is

comfortable and that you can maintain full

control of your vehicle.

MANUAL SEATS (IF EQUIPPED)

HEAD RESTRAINT COMPONENTS

E396321

The head restraints consist of:

An energy absorbing head

restraint.

Guide sleeve adjust and release

button.

Two steel stems.C

ADJUSTING THE HEAD

RESTRAINT

WARNING: Fully adjust the head

restraint before you sit in or operate your

vehicle. This will help minimize the risk

of neck injury in the event of a crash. Do

not adjust the head restraint when your

vehicle is moving.

WARNING: The head restraint is a

safety device. Whenever possible it

should be installed and properly

adjusted when the seat is occupied.

Failure to adjust the head restraint

properly could reduce its effectiveness

during certain impacts.

WARNING: Adjust the head

restraints for all passengers before you

drive your vehicle. This will help minimize

the risk of neck injury in the event of a

crash. Do not adjust the head restraints

when your vehicle is moving.

Note: Adjust the seat backrest to an upright

driving position before adjusting the head

restraint. Adjust the head restraint so that

the top of it is level with the top of your head

and as far forward as possible. Make sure

that you remain comfortable. If you are

extremely tall, adjust the head restraint to

its highest position.

Pull the head restraint up to raise it.

To lower the head restraint:

1. Press and hold the adjust and release

button.

2. Push the head restraint down.

114

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Front Seats

E327919

For vehicles with tilting head restraints:

1. Adjust the seat backrest to an upright

driving or riding position.

2. Pivot the head restraint forward toward

your head to the preferred position.

After the head restraint reaches the

forward-most tilt position, pivot it forward

again to release it to the rearward, untilted

position.

Note: Do not attempt to force the head

restraint backward after it is tilted. Instead,

continue tilting it forward until the head

restraint releases to the upright position.

REMOVING THE HEAD RESTRAINT

1. Pull up the head restraint until it

reaches its highest position.

2. Press and hold the adjust and release

button.

3. Pull up the head restraint.

INSTALLING THE HEAD

RESTRAINT

Align the steel stems into the guide sleeves

and push the head restraint down until it

locks.

MOVING THE SEAT BACKWARD

AND FORWARD

WARNING: Make sure the seat fully

locks into place by rocking it backward

and forward. Not securing the seat into

the locked position can be dangerous in

a crash and could cause serious personal

injury or death.

E308316

ADJUSTING THE SEAT BACKREST

WARNING: Do not place cargo or

any objects behind the seatback before

returning it to the original position.

WARNING: Reclining the seatback

can cause an occupant to slide under the

seat's seatbelt, resulting in severe

personal injuries in the event of a crash.

115

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Front Seats

E175315

ADJUSTING THE SEAT HEIGHT

E324469

ACCESSING THE REAR SEATS

E207088

Pull the release handle and fold the front

seat backrest to access the rear seats. The

seat backrest has memory and locks in the

original position.

POWER SEATS (IF EQUIPPED)

HEAD RESTRAINT COMPONENTS

E396321

The head restraints consist of:

An energy absorbing head

restraint.

Guide sleeve adjust and release

button.

Two steel stems.C

116

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Front Seats

ADJUSTING THE HEAD

RESTRAINT - VEHICLES WITH:

FRONT 4-WAY HEAD RESTRAINTS

WARNING: Fully adjust the head

restraint before you sit in or operate your

vehicle. This will help minimize the risk

of neck injury in the event of a crash. Do

not adjust the head restraint when your

vehicle is moving.

WARNING: The head restraint is a

safety device. Whenever possible it

should be installed and properly

adjusted when the seat is occupied.

Failure to adjust the head restraint

properly could reduce its effectiveness

during certain impacts.

WARNING: Adjust the head

restraints for all passengers before you

drive your vehicle. This will help minimize

the risk of neck injury in the event of a

crash. Do not adjust the head restraints

when your vehicle is moving.

To raise the head restraint, pull the head

restraint up.

To lower the head restraint:

1. Press and hold the adjust and release

button.

2. Push the head restraint down.

To tilt the head restraint:

E327919

1. Adjust the seat backrest to an upright

driving or riding position.

2. Pivot the head restraint forward toward

your head to the preferred position.

After the head restraint reaches the

forward-most tilt position, pivot it forward

again to release it to the rearward, untilted

position.

Note: Do not attempt to force the head

restraint backward after it is tilted. Instead,

continue tilting it forward until the head

restraint releases to the upright position.

ADJUSTING THE HEAD

RESTRAINT - VEHICLES WITH:

FRONT FIXED HEAD RESTRAINTS

E174407

117

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Front Seats

The non-adjustable head restraints consist

of a trimmed foam covering over the upper

structure of the seat backrest.

Properly adjust the seat backrest to an

upright driving or riding position, so that

the head restraint is positioned as close as

possible to the back of your head.

REMOVING THE HEAD RESTRAINT

1. Pull up the head restraint until it

reaches its highest position.

2. Press and hold the adjust and unlock

button.

3. Pull up the head restraint.

INSTALLING THE HEAD

RESTRAINT

Align the steel stems into the guide sleeves

and push the head restraint down until it

locks.

MOVING THE SEAT BACKWARD

AND FORWARD

E384940

ADJUSTING THE SEAT BACKREST

WARNING: Do not place cargo or

any objects behind the seatback before

returning it to the original position.

E384941

ADJUSTING THE SEAT HEIGHT

E384942

118

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Front Seats

ADJUSTING THE LUMBAR

SUPPORT

E384943

HEATED SEATS (IF EQUIPPED)

HEATED SEAT PRECAUTIONS

WARNING: Use caution when using

the heated seat if you are unable to feel

pain to your skin because of advanced

age, chronic illness, diabetes, spinal cord

injury, medication, alcohol use,

exhaustion or other physical conditions.

The heated seat could cause burns even

at low temperatures, especially if used

for long periods of time. Failure to follow

this instruction could result in personal

injury.

WARNING: Do not poke sharp

objects into the seat cushion or seat

backrest. This could damage the heated

seat element and cause it to overheat.

Failure to follow this instruction could

result in personal injury.

WARNING: Do not place anything

on the seat that blocks the heat, for

example a seat cover or a cushion. This

could cause the seat to overheat. Failure

to follow this instruction could result in

personal injury.

Do not:

• Place heavy objects on the seat.

• Operate the heated seat if water or any

other liquid spills on the seat. Allow the

seat to dry.

SWITCHING THE HEATED SEATS

ON AND OFF

The vehicle must be running to use this

feature.

E374074

Press this symbol on the

touchscreen to switch on the

heated seats.

Select your preferred heat level or off. You

can also slide the menu bar up to control

the heat intensity.

More indicator lights indicate the warmer

temperature of the seat.

Note: The heated seats turn on during a

remote start if they are enabled.

Note: The heated seats may turn on when

you start your vehicle if they were on when

you previously switched your vehicle off.

Note: When you switch on the auto setting,

the heated seats turn on to match your

climate control setting.

119

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Front Seats

VENTILATED SEATS (IF EQUIPPED)

VENTILATED SEAT PRECAUTIONS

Do not:

• Spill liquid on the front seats. This may

cause the air vent holes to become

blocked and not work properly.

• Place cargo or objects under the seats.

They may block the air intake causing

the air vents to not work properly.

SWITCHING THE VENTILATED

SEATS ON AND OFF

The vehicle must be running to use this

feature.

E374075

Press this symbol on the

touchscreen to switch on the

ventilated seats.

Select your preferred fan speed or off. You

can also slide the menu bar up to control

the fan speed.

More indicator lights indicate higher fan

speeds.

Note: The ventilated seats turn on during

a remote start if they were on when you

previously switched your vehicle off.

Note: The ventilated seats may turn on

when you start your vehicle if they were on

when you previously switched your vehicle

off.

Note: When you switch on the auto setting,

the ventilated seats turn on to match your

climate control setting.

120

Mustang (CZJ) Canada/Mexico/United States of America, enUSA, Edition date: 202407, DOM

Front Seats

Front Seats for Your Ford Mustang 2 Door Seventh Generation (2024-2026)

Popular Owner Manuals

Latest Owner Manuals