Compass
When you turn the ignition switch to ON (w*1, the compass self-calibrates, and the
1Compass
compass display appears.
Compass operation can be affected under the
following conditions:
•
•
•
Driving near power lines or stations
object that can cause a magnetic disturbance
When accessories such as antennas and roof racks
are mounted by magnets
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
•
Models with one display
1. Turn the ignition switch to ON (w
2. Press and hold the SETUP button until the
display shows the compass setting menu.
.
1Compass Calibration
Calibrate the compass in an open area.
3. Rotate
to select Calibration, then press
Models with one display
.
While setting the compass:
•
•
The
button returns to the previous screen.
The SETUP button cancels the setting mode.
Compass Setting Menu Items
4. When the display changes to Calibration
Start, press
.
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
*1: Models with the smart entry system have an ENGINE START/STOP button
instead of an ignition switch.
342
