2016-2020 Honda Jazz 4 Door Driving User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving for Your Honda Jazz 4 Door Third Generation (2016-2020)

18 FIT JAZZ-32T5A6100.book 381 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Driving  
This chapter discusses driving and refueling.  
Manual transmission models  
Before Driving....................................... 382  
Towing a Trailer.................................... 386  
When Driving  
Models without keyless access system  
Starting the Engine .............................. 392  
Models with keyless access system  
Brake Assist System ..............................456  
Auto Idle Stop ..................................... 415  
Cruise Control ..................................... 420  
Adjustable Speed Limiter ..................... 423  
Intelligent Speed Limiter ...................... 427  
Forward Collision Warning*................. 434  
Lane Departure Warning*.................... 438  
Traffic Sign Recognition System* ......... 442  
Vehicle Stability Assist (VSA) System......... 446  
Agile Handling Assist ........................... 448  
Deflation Warning System ................... 449  
Adjusting Headlight Distribution .......... 451  
City-Brake Active system.......................457  
Emergency Stop Signal .........................462  
Parking Your Vehicle  
When Stopped .....................................463  
Parking Sensor System*........................464  
Multi-View Rear Camera  
*
Starting the Engine .............................. 395  
Precautions While Driving..................... 399  
Continuously Variable Transmission* ....... 401  
Continuously variable transmission models  
About Your Multi-View Rear Camera....469  
Refueling  
Fuel Information...................................471  
How to Refuel ......................................472  
Fuel Economy and CO2 Emissions  
Improving Fuel Economy and Reducing CO2  
Emissions............................................473  
Shifting................................................ 402  
Manual transmission models  
Braking  
Shifting................................................ 407  
Continuously variable transmission models  
Brake System....................................... 453  
Anti-lock Brake System (ABS)............... 455  
Auto Idle Stop...................................... 410  
* Not available on all models  
381  
18 FIT JAZZ-32T5A6100.book 382 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Before Driving  
Driving Preparation  
Check the following items before you start driving.  
1Exterior Checks  
Exterior Checks  
■
NOTICE  
• Make sure there are no obstructions on the windows, door mirrors, exterior  
lights, or other parts of the vehicle.  
When doors are frozen shut, use warm water around  
the door edges to melt any ice. Do not try to force  
them open, as this can damage the rubber trim  
around the doors. When done, wipe dry to avoid  
further freezing.  
u Remove any frost, snow, or ice.  
u Remove any snow on the roof, as this can slip down and obstruct your field of  
vision while driving. If frozen solid, remove ice once it has softened.  
u When removing ice from around the wheels, be sure not to damage the wheel  
or wheel components.  
• Make sure the bonnet is securely closed.  
u If the bonnet opens while driving, your front view will be blocked.  
• Make sure the tyres are in good condition.  
Do not pour warm water into the key cylinder.  
You will be unable to insert the key if the water  
freezes in the hole.  
Heat from the engine and exhaust can ignite  
u Check air pressures and check for damage and excessive wear.  
2 Checking and Maintaining Tyres P. 515  
flammable materials left under the bonnet, causing a  
fire. If you've parked your vehicle for an extended  
period, inspect and remove any debris that may have  
collected, such as dried grass and leaves that have  
fallen or have been carried in for use as a nest by a  
small animal. Also check under the bonnet for  
leftover flammable materials after you or someone  
else has performed maintenance on your vehicle.  
• Make sure there are no people or objects behind or around the vehicle.  
u There are blind spots from the inside.  
382  
18 FIT JAZZ-32T5A6100.book 383 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBefore DrivinguDriving Preparation  
1Interior Checks  
Interior Checks  
■
The headlight aim is set by the factory, and does not  
need to be adjusted. However, if you regularly carry  
heavy items in the luggage area or tow a trailer, have  
the aiming readjusted at a dealer or by a qualified  
technician.  
• Store or secure all items on board properly.  
u Carrying too much luggage, or improperly storing it, can affect your vehicle's  
handling, stability, stopping distance, and tyres, and make it unsafe.  
2 Load Limit P. 385  
• Do not pile items higher than the seat height.  
u They can block your view and may be thrown forward in the event of sudden  
braking.  
• Do not place anything in the front seat footwells. Make sure to secure the floor  
mat*.  
Models with halogen type headlights  
You can adjust the low beam headlight angle by your  
self.  
2 Headlight Adjuster* P. 174  
Models with LED type headlights  
u An object or unsecured floor mat can interfere with your brake and accelerator  
pedal operation while driving.  
• If you have any animals on board, do not let them move around in the vehicle.  
u They may interfere with driving and a crash could occur.  
• Securely close all doors and the tailgate.  
Your vehicle is equipped with the automatic  
headlight adjusting system that automatically adjusts  
the vertical angle of the low beam headlights.  
• Adjust your seating position properly.  
u Adjust the head restraint, too.  
2 Adjusting the Seats P. 187  
2 Adjusting the front head restraint positions P. 193  
• Adjust the mirrors and steering wheel properly for your driving.  
u Adjust them while sitting in the proper driving position.  
2 Adjusting the Mirrors P. 185  
2 Adjusting the Steering Wheel P. 184  
* Not available on all models  
Continued  
383  
18 FIT JAZZ-32T5A6100.book 384 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBefore DrivinguDriving Preparation  
• Be sure items placed on the floor behind the front seats cannot roll under the  
seats.  
u They can interfere with the driver's ability to operate the pedals, or the  
operation of the seats.  
• Everyone in the vehicle must fasten their seat belt.  
2 Fastening a Seat Belt P. 42  
• Make sure that the indicators in the instrument panel come on when you start the  
vehicle, and go off soon after.  
u Always have a dealer check the vehicle if a problem is indicated.  
2 Indicators P. 86  
384  
18 FIT JAZZ-32T5A6100.book 385 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBefore DrivinguLoad Limit  
Load Limit  
When you load luggage, the total weight of the vehicle, all passengers, and luggage  
must not exceed the maximum permissible weight.  
2 Specifications P. 590  
1Load Limit  
3
WARNING  
Overloading or improper loading can affect  
handling and stability and cause a crash in  
which you can be hurt or killed.  
The load for the front and rear axles also must not exceed the maximum permissible  
axle weight.  
2 Specifications P. 590  
Follow all load limits and other loading  
guidelines in this manual.  
385  
18 FIT JAZZ-32T5A6100.book 386 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Towing a Trailer  
Towing Preparation  
1Towing Load Limits  
Towing Load Limits  
■
Your vehicle can tow a trailer if you carefully observe the load limits, use the proper  
equipment, and follow the towing guidelines. Check the load limits before driving.  
■ Total trailer weight  
3
WARNING  
Exceeding any load limit or improperly  
loading your vehicle and trailer can cause a  
crash in which you can be seriously hurt or  
killed.  
Do not exceed the maximum towing weight  
of the trailer and towbar (with/without  
brakes), luggage and everything in or on it.  
Check the loading of your vehicle and  
trailer carefully before starting to drive.  
Towing loads in excess of the maximum  
towing weight can seriously affect vehicle  
handling and performance and can damage  
Check if all loads are within limits at a public scale.  
If a public scale is not available, add the estimated  
weight of your luggage load to the weight of your  
trailer (as quoted by the manufacturer), and the  
trailer nose load.  
Total Load  
the engine and drivetrain.  
Each weight limit is calculated based on the following conditions:  
• Occupants fill seats from the front of the vehicle to the back  
Any additional weight, luggage or accessories reduce the maximum trailer weight  
and maximum tongue load.  
Break-in Period  
Avoid towing a trailer during your vehicle's first 1,000  
km (625 miles).  
Never exceed the maximum towing weight and any  
specified load limit.  
2 Specifications P. 593  
If you tow a trailer in mountainous conditions,  
remember to reduce 10% of the combined vehicle  
and trailer weights from the maximum towing  
weight for every 1,000 metres (300 feet) of elevation.  
386  
18 FIT JAZZ-32T5A6100.book 387 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuTowing a TraileruTowing Preparation  
■ Towbar down load  
The trailer nose load should never exceed 95  
kg (209 lbs). This is the amount of weight the  
trailer puts on the towbar when it is fully-  
loaded. As a rule of thumb for trailer weights  
of less than 450 kg (992 lbs), the trailer nose  
load should be 10 percent of the total trailer  
package.  
Trailer NoseLoad  
• Excessive trailer nose load reduces front tyre traction and steering control. Too  
little trailer nose load can make the trailer unstable and cause it to sway.  
• To achieve a proper trailer nose load, start by loading 60% of the load toward the  
front of the trailer and 40% toward the rear. Readjust the load as needed.  
Continued  
387  
18 FIT JAZZ-32T5A6100.book 388 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuTowing a TraileruTowing Preparation  
1Towing Equipment and Accessories  
Towing Equipment and Accessories  
■
Make sure that all equipment is properly installed and  
maintained, and that it meets the regulations of the  
country where you are driving.  
Towing equipment varies by the size of your trailer, how much load you are towing,  
and where you are towing.  
■ Towbars  
The towbar must be of an approved type and properly bolted to the underbody.  
Consult your trailer maker for proper installation and  
setup of the equipment. Improper installation and  
setup can affect the handling, stability, and braking  
performance of your vehicle.  
■ Safety chains  
Always use safety chains when you tow a trailer. Leave enough slack to allow the  
trailer to turn corners easily, but do not allow the chains to drag on the ground.  
■ Trailer brakes  
If you are thinking of getting a trailer that has brakes, be sure they are electronically  
actuated. Do not attempt to tap into your vehicle’s hydraulic system. No matter how  
successful it may seem, any attempt to attach trailer brakes to your vehicle’s  
hydraulic system will lower braking effectiveness and create a potential hazard.  
■ Additional towing equipment  
Consult your trailer sales or rental agency if any other  
items are recommended or required for your towing  
situation.  
There may be laws requiring special outside mirrors when towing a trailer. Even if  
mirrors are not required in your locale, you should install special mirrors if visibility is  
restricted in any way.  
■ Trailer light  
The lighting and wiring of trailers can vary by type  
and brand. If a connector is required, it should only  
be installed by a qualified technician.  
Trailer lights and equipment must comply with the regulations of the country where  
you are driving. Check with your local trailer sales or rental agency for the  
requirements in the area where you plan to tow.  
388  
18 FIT JAZZ-32T5A6100.book 389 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuTowing a TraileruDriving Safely with a Trailer  
Driving Safely with a Trailer  
1Driving Safely with a Trailer  
Things You Need To Know Before Towing a Trailer  
■
Operating speed when towing a trailer must not  
exceed 100 km/h (62 mph).  
• Have the trailer properly serviced and keep it in good condition.  
• Make sure that all the weights and load in the vehicle and trailer are within limits.  
2 Towing Load Limits P. 386  
Parking  
In addition to the normal precautions, place wheel  
chocks at each of the trailer's tyres.  
• Securely attach the towbar, safety chains, and other necessary parts to the trailer.  
• Securely store all the items in and on the trailer so that they do not shift while  
driving.  
We recommend you drive uphill or less than 12%  
slope. Follow the trailer association’s  
recommendations for suitable roads.  
• Check if the lights and brakes on the trailer are working properly.  
• Check the pressure of the trailer tyres, including the spare.  
• Check regulations concerning the maximum speed or driving restrictions for  
vehicles towing trailers. If you are driving across several countries, check each  
country’s requirements before leaving home, because regulations may vary.  
• Turn off the Auto Idle Stop system using the Auto Idle Stop OFF button. The trailer  
weight can affect your vehicle's brake effectiveness if Auto Idle Stop is activated  
on a hill while towing a trailer.  
Winds caused by passing large vehicles can sway your  
trailer, keep a constant speed and steer straight  
ahead.  
Always drive slowly and have someone guide you  
when reversing.  
Continued  
389  
18 FIT JAZZ-32T5A6100.book 390 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuTowing a TraileruDriving Safely with a Trailer  
1Towing Speeds and Gears  
Towing Speeds and Gears  
■
When towing a fixed-sided trailer (e.g., camper), do  
not exceed 88 km/h (55 mph). At higher speeds, the  
trailer may sway or affect vehicle handling.  
• Drive slower than normal.  
• Obey posted speed limits for vehicles with trailers.  
Continuously variable transmission models  
Manual transmission models  
• Use the (D position when towing a trailer on level roads.  
The shift down indicator will not prompt to  
downshift to 1st gear. It is up to you to downshift to  
1st gear to increase engine braking. Avoid sudden  
engine braking.  
Manual transmission models  
• Either shift up or shift down indicator will come on at the best time to shift to a  
higher or lower gear for the better fuel economy.  
Road and traffic conditions may require you to shift  
at times other than those indicated.  
390  
18 FIT JAZZ-32T5A6100.book 391 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuTowing a TraileruDriving Safely with a Trailer  
Turning and Braking  
■
• Turn more slowly and with a wider turning arc than normal.  
• Allow more time and distance for braking.  
• Do not brake or turn suddenly.  
Driving in Hilly Terrain  
■
• Closely watch your high temperature indicator. If the indicator remains on, turn  
off the heating and cooling system*/climate control system* and reduce speed.  
Pull to the side of the road safely to cool down the engine if necessary.  
Continuously variable transmission models  
• Shift to the (S position and use the paddle shifter to shift down when driving  
down hills.  
This helps to increase engine braking efficiently and prevent the brake system  
from overheating.  
* Not available on all models  
391  
18 FIT JAZZ-32T5A6100.book 392 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
When Driving  
Models without keyless access system  
Starting the Engine  
1Starting the Engine  
1. Make sure the parking brake is applied.  
Keep your foot firmly on the brake pedal when  
starting the engine.  
The engine is harder to start in cold weather and in  
thinner air found at altitudes above 2,400 metres  
(8,000 feet).  
When starting the engine in cold weather, turn off all  
electrical accessories such as the lights, heating and  
cooling system*/climate control system*, and rear  
demister in order to reduce battery drain.  
Continuously variable transmission models  
2. Check that the transmission is in (P, then  
depress the brake pedal.  
u Although it is possible to start the vehicle  
in (N, it is safer to start it in (P.  
If the exhaust system sounds abnormal or you can  
smell exhaust gas inside the vehicle, have your vehicle  
checked by a dealer. There may be a problem with  
the engine or exhaust system.  
Brake Pedal  
Manual transmission models  
Clutch Pedal  
2. Check that the transmission is in (N. Then  
depress the brake pedal with your right  
foot, and the clutch pedal with your left  
foot.  
u The clutch pedal must be fully depressed  
to start the engine.  
Brake Pedal  
* Not available on all models  
392  
18 FIT JAZZ-32T5A6100.book 393 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguStarting the Engine  
All models  
1Starting the Engine  
3. Turn the ignition switch to START (e  
without depressing the accelerator pedal.  
Do not hold the key in START (e for more than 10  
seconds.  
• If the engine does not start right away, wait for at  
least 30 seconds before trying again.  
• If the engine starts, but then immediately stops,  
wait at least 30 seconds before repeating step 3  
while gently depressing the accelerator pedal.  
Release the accelerator pedal once the engine  
starts.  
■ Stopping the Engine  
You can turn the engine off when the vehicle is completely stopped.  
The immobilizer system protects your vehicle from  
theft. If an improperly coded device is used, the  
engine's fuel system is disabled.  
2 Immobilizer System P. 159  
Starting to Drive  
■
Continuously variable transmission models  
1. Keeping your right foot on the brake pedal, release the parking brake. Check that  
the parking brake and brake system indicator has gone off.  
2 Parking Brake P. 453  
1Starting to Drive  
Manual transmission models  
2. Put the shift lever in (D. Select (R when reversing.  
If the engine stalls, fully depress the clutch pedal  
within three seconds.  
The engine may automatically restart under certain  
conditions.  
3. Gradually release the brake pedal and gently depress the accelerator pedal to pull  
away.  
Otherwise, follow the standard procedure.  
Continued  
393  
18 FIT JAZZ-32T5A6100.book 394 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguStarting the Engine  
■ Hill start assist system  
Hill start assist keeps the brake engaged briefly to help to prevent the vehicle from  
rolling on inclines as you move your foot from the brake pedal to the accelerator.  
1Hill start assist system  
Hill start assist may not prevent the vehicle from  
rolling downhill on a very steep or slippery slope, and  
does not operate on small inclines.  
Manual transmission models  
Depress the clutch pedal, and shift to one of the forward gears when facing uphill,  
or (R when facing downhill, then release the brake pedal.  
Hill start assist is not a replacement for the parking  
brake.  
Continuously variable transmission models  
Hill start assist will operate even when VSA is  
switched off.  
Move the shift lever to (D or (S when facing uphill, or (R when facing downhill,  
then release the brake pedal.  
394  
18 FIT JAZZ-32T5A6100.book 395 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguStarting the Engine  
Models with keyless access system  
Starting the Engine  
1Starting the Engine  
1. Make sure the parking brake is applied.  
Keep your foot firmly on the brake pedal when  
starting the engine.  
The engine is harder to start in cold weather and in  
thinner air found at altitudes above 2,400 metres  
(8,000 feet).  
When starting the engine in cold weather, turn off all  
electrical accessories such as the lights, climate  
control system, and rear demister in order to reduce  
battery drain.  
Continuously variable transmission models  
2. Check that the transmission is in (P, then  
depress the brake pedal.  
u Although it is possible to start the vehicle  
in (N, it is safer to start it in (P.  
If the exhaust system sounds abnormal or you can  
smell exhaust gas inside the vehicle, have your vehicle  
checked by a dealer. There may be a problem with  
the engine or exhaust system.  
The immobilizer system protects your vehicle from  
theft. If an improperly coded device is used, the  
engine’s fuel system is disabled.  
Brake Pedal  
2 Immobilizer System P. 159  
Manual transmission models  
Clutch Pedal  
2. Check that the transmission is in (N. Then  
depress the brake pedal with your right  
foot, and the clutch pedal with your left  
foot.  
u The clutch pedal must be fully depressed  
to start the engine.  
Brake Pedal  
Continued  
395  
18 FIT JAZZ-32T5A6100.book 396 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguStarting the Engine  
All models  
1Starting the Engine  
3. Press the ENGINE START/STOP button  
without depressing the accelerator pedal.  
Bring the keyless remote close to the ENGINE  
START/STOP button if the battery in the keyless  
remote is weak.  
2 If the Keyless Remote Battery is Weak  
P. 560  
The engine may not start if the keyless remote is  
subjected to strong radio waves.  
Do not hold the ENGINE START/STOP button to  
start the engine.  
If the engine does not start, wait at least 30 seconds  
before trying again.  
396  
18 FIT JAZZ-32T5A6100.book 397 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguStarting the Engine  
Stopping the Engine  
■
You can turn the engine off when the vehicle is completely stopped.  
Continuously variable transmission models  
1. Put the transmission into (P.  
2. Press the ENGINE START/STOP button.  
Manual transmission models  
• If the transmission is in (N, press the ENGINE START/STOP button.  
• If the transmission is in any gear other than (N, depress the clutch pedal, then  
press the ENGINE START/STOP button.  
1Starting to Drive  
Starting to Drive  
■
Manual transmission models  
Continuously variable transmission models  
If the engine stalls, fully depress the clutch pedal  
within three seconds.  
The engine may automatically restart under certain  
conditions.  
1. Keeping your right foot on the brake pedal, release the parking brake. Check that  
the parking brake and brake system indicator has gone off.  
2 Parking Brake P. 453  
Otherwise, follow the standard procedure.  
2. Put the shift lever in (D. Select (R when reversing.  
3. Gradually release the brake pedal and gently depress the accelerator pedal to pull  
away.  
Continued  
397  
18 FIT JAZZ-32T5A6100.book 398 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguStarting the Engine  
■ Hill start assist system  
Hill start assist keeps the brake engaged briefly to help to prevent the vehicle from  
rolling on inclines as you move your foot from the brake pedal to the accelerator.  
1Hill start assist system  
Hill start assist may not prevent the vehicle from  
rolling downhill on a very steep or slippery slope, and  
does not operate on small inclines.  
Continuously variable transmission models  
Move the shift lever to (D or (S when facing uphill, or (R when facing downhill,  
then release the brake pedal.  
Hill start assist is not a replacement for the parking  
brake.  
Manual transmission models  
Depress the clutch pedal, and shift to one of the forward gears when facing uphill,  
or (R when facing downhill, then release the brake pedal.  
Hill start assist will operate even when VSA is  
switched off.  
398  
18 FIT JAZZ-32T5A6100.book 399 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguPrecautions While Driving  
Precautions While Driving  
1Precautions While Driving  
In Rain  
■
CAUTION: Do not drive on the road where water is  
deep. Driving through deep water will cause damage  
to the engine and electrical equipment and the  
vehicle will break down.  
Avoid driving in deep water and on flooded roads. This can damage the engine or  
driveline, or cause electrical component failure.  
NOTICE  
Do not operate the shift lever while pressing the  
accelerator pedal. You could damage the  
transmission.  
NOTICE  
If you repeatedly turn the steering wheel at an  
extremely low speed, or hold the steering wheel in  
the full left or right position for a while, the electric  
power steering (EPS) system heats up. The system  
goes into a protective mode, and limits its  
performance. The steering wheel becomes harder  
and harder to operate. Once the system cools down,  
the EPS system is restored. Repeated operation under  
these conditions can eventually damage the system.  
If the ignition switch is turned to ACCESSORY (q  
while driving, the engine will shut down and all  
steering and brake power assist functions will stop,  
making it difficult to control the vehicle.  
Do not put the transmission into (N, as you will lose  
engine braking (and acceleration) performance.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
Continued  
399  
18 FIT JAZZ-32T5A6100.book 400 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguPrecautions While Driving  
1Precautions While Driving  
Other Precautions  
■
During the first 1,000 km (625 miles) of operation,  
avoid sudden acceleration or full throttle operation so  
as not to damage the engine or powertrain.  
If there is a strong impact with something under the vehicle, stop in a safe location.  
Check the underside of the vehicle for damage or any fluid leaks.  
Avoid hard braking for the first 300 km (200 miles).  
You should also follow this when the brake pads are  
replaced.  
NOTICE  
The following can damage the under spoiler:  
• Parking the vehicle by a parking block  
• Parallel parking along the road shoulder  
• Driving towards the bottom of a hill  
• Driving up or down to a different surface level  
(such as a road shoulder)  
• Driving on a rutted or bumpy road  
• Driving on a road with potholes.  
400  
18 FIT JAZZ-32T5A6100.book 401 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguContinuously Variable Transmission  
Continuously Variable Transmission*  
Creeping  
■
The engine runs at a higher idle speed and creeping increases.  
Keep the brake pedal firmly depressed when stopped.  
Kickdown  
■
Quickly depressing the accelerator pedal while driving uphill may cause the  
transmission to drop to a lower gear, unexpectedly increasing vehicle speed. Depress  
the accelerator pedal carefully, especially on slippery roads and curves.  
* Not available on all models  
401  
18 FIT JAZZ-32T5A6100.book 402 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguShifting  
Continuously variable transmission models  
Shifting  
1Shift lever positions  
Change the shift position in accordance with your driving needs.  
Models without keyless access system  
You cannot turn the ignition switch to LOCK (0 and  
remove the key unless the shift lever is in (P.  
Models with keyless access system  
■ Shift lever positions  
You cannot change the power mode from ON to  
VEHICLE OFF (LOCK) unless the shift lever is in (P.  
Park  
Used when parking or starting the engine  
The vehicle may move forward very slightly even in  
(N while the engine is cold.  
Reverse  
Depress the brake pedal firmly and, when necessary,  
apply the parking brake.  
Used when reversing  
Neutral  
When shifting positions in extremely low  
Transmission is not locked  
temperatures (-30°C), there may be a short delay  
before the shift position is displayed. Always confirm  
you are in the correct shift position before driving.  
Drive  
Used:  
●
For normal driving  
When temporarily driving in the  
7-speed manual shift mode  
●
Drive (S)  
Release Button  
Used:  
●
For better acceleration  
To increase engine braking  
●
●
When going up or down hills  
When driving in the 7-speed manual  
shift mode  
●
402  
18 FIT JAZZ-32T5A6100.book 403 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguShifting  
1Shift Lever Operation  
Shift Lever Operation  
■
NOTICE  
When you change the shift lever from (D to (R and  
vice versa, come to a complete stop and keep the  
brake pedal depressed.  
Tachometer’s red zone  
Operating the shift lever before the vehicle has come  
to a complete standstill can damage the transmission.  
Use the shift lever position indicator to check the  
lever position before pulling away.  
If the transmission indicator blinks when driving, in  
any shift position, there is a problem with the  
transmission.  
Avoid sudden acceleration and have the transmission  
checked by a dealer as soon as possible.  
M (7-Speed Manual Shift Mode)  
Indicator/Shift Indicator  
Shift Lever Position Indicator  
The fuel supply may be cut off if you drive at engine  
speeds in or over the tachometer’s red zone (engine  
speed limit). If this happens, you may experience a  
slight jolt.  
It may not be possible to operate the shift lever if the  
brake pedal is applied while the shift lever release  
button is held down.  
Depress the brake pedal and press the  
shift lever release button to shift.  
Shift without pressing the shift lever  
release button.  
Depress the brake pedal first.  
Press the shift lever release button  
and shift.  
Continued  
403  
18 FIT JAZZ-32T5A6100.book 404 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguShifting  
17-Speed Manual Shift Mode  
7-Speed Manual Shift Mode  
■
In the 7-speed manual shift mode, the transmission  
shifts up or down by operating either paddle shifter  
under the following conditions:  
Shift Up: The engine speed reaches the lowest  
threshold of the higher speed position.  
Use the paddle shifters to change between 1st and 7th speeds without releasing  
your hands from the steering wheel. The transmission switches to the 7-speed  
manual shift mode when you pull a paddle shifter while driving. This mode is useful  
when engine braking is needed.  
Shift Down: The engine speed reaches the highest  
threshold of the lower speed position.  
■ When the shift lever is in (D:  
The shift mode goes into the 7-speed manual shift mode temporarily, and the  
number is displayed in the shift indicator.  
The 7-speed manual shift mode is cancelled automatically if you drive at constant  
speed or accelerate, and the number in the shift indicator goes off.  
When the engine speed reaches near the  
tachometer’s red zone, the transmission shifts up  
automatically.  
When the engine speed reaches the lowest threshold  
of the selected speed position, the transmission shifts  
down automatically.  
You can cancel this mode by pulling the  
paddle shifter for a few seconds.  
The 7-speed manual shift mode is especially useful when reducing the vehicle speed  
temporarily before making a turn.  
Operating the paddle shifters on slippery surfaces  
may cause the tyres to lock up. In this case, the 7-  
speed manual shift mode is cancelled and goes back  
to the normal driving mode.  
■ When the shift lever is in (S:  
The shift mode goes into the 7-speed manual shift mode. The M indicator and the  
speed number are displayed in the shift indicator. As the vehicle speed slows down,  
the transmission automatically shifts down accordingly. When the vehicle comes to  
a stop, it automatically shifts down into 1st.  
You can cancel this mode by pulling the  
paddle shifter for a few seconds.  
If the vehicle speed increases and the engine speed reaches near the tachometer’s  
red zone, the transmission automatically shifts up.  
404  
18 FIT JAZZ-32T5A6100.book 405 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguShifting  
17-Speed Manual Shift Mode Operation  
7-Speed Manual Shift Mode Operation  
■
Each paddle shift operation makes a single gear  
change.  
You can only pull away in 1st gear.  
When cancelling the 7-speed manual shift mode, move the shift lever from (S to  
(D. When the 7-speed manual shift mode is cancelled, the M indicator and shift  
indicator will turn off.  
To change continuously, release the paddle shifter  
before pulling it again for the next speed.  
The shift indicator blinks when you cannot shift up or  
down. It indicates that your vehicle speed is not in its  
allowable shifting range.  
Slightly accelerate to shift up and decelerate to shift  
down while the indicator is blinking.  
You can cancel this mode by pulling the  
paddle shifter for a few seconds.  
Paddle Shifter  
(Shift down)  
Paddle Shifter  
(Shift up)  
Downshifting when pulling  
Upshifting when pulling  
the  
the paddle shifter (Changes  
to lower speed number)  
paddle shifter  
(Changes to higher speed  
number)  
Continued  
405  
18 FIT JAZZ-32T5A6100.book 406 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguShifting  
1Shift Up Indicator  
Shift Up Indicator  
■
Comes on while the vehicle is in the 7-speed  
manual shift mode to indicate when a shift  
change is appropriate to maintain the most  
fuel efficient driving style.  
3WARNING  
The shift indicator is only a guide to help  
you achieve better fuel economy.  
Shift Up Indicator  
Never refer to the Shift Indicators when  
road and traffic conditions are unsuitable  
or when it may distract you.  
The shift up indicator: Comes on when  
shifting up is recommended.  
Ambient meter colour may change if you do not  
change transmission when a shift indicator  
illuminates. This can result in a change in fuel  
economy.  
Road and traffic conditions may require you to shift  
at times other than those indicated.  
406  
18 FIT JAZZ-32T5A6100.book 407 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguShifting  
Manual transmission models  
Shifting  
1Shifting  
Shift Lever Operation  
NOTICE  
■
Do not shift to (R before the vehicle comes to a  
complete stop.  
Shifting to (R before stopping can damage the  
transmission.  
Fully depress the clutch pedal to operate the shift lever and change gears, then  
slowly release the pedal.  
Depress the clutch pedal, and pause for a few seconds before shifting into (R, or  
shift into one of the forward gears for a moment. This stops the gears so they do not  
“grind.”  
NOTICE  
Before downshifting, make sure the engine will not  
go into the tachometer's red zone. Should this occur,  
it can severely damage your engine.  
When you are not shifting, do not rest your  
foot on the clutch pedal. This can cause your  
clutch to wear out faster.  
There is a metallic part on the shift lever. If you leave  
the vehicle parked outside for a long time on a hot  
day, be careful before moving the shift lever. Because  
of heat, the shift lever may be extremely hot. If the  
outside temperature is low, the shift lever may feel  
cold.  
If you exceed the maximum speed for the gear you  
are in, the engine speed will enter into the  
tachometer's red zone. When this happens, you may  
experience a slight jolt.  
Continued  
407  
18 FIT JAZZ-32T5A6100.book 408 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguShifting  
1Shift Up/Down Indicators  
Shift Up/Down Indicators  
■
Come on to indicate when a gear change is  
appropriate to maintain the most fuel efficient  
driving style.  
3WARNING  
The shift indicator is only a guide to help  
you achieve better fuel economy.  
Never refer to the Shift Indicators when  
road and traffic conditions are unsuitable  
or when it may distract you.  
The shift up indicator: Comes on when  
shifting up is recommended.  
The shift down indicator: Comes on when  
shifting down is recommended.  
This indicator will not prompt you to downshift to  
increase engine braking. It is up to you to downshift  
to increase engine braking when driving downhill.  
Always shift down at the appropriate vehicle speed.  
The shift down indicator does not come on when  
downshifting from (2 to (1.  
Ambient meter colour may change if you do not  
change gears when a shift indicator illuminates. This  
can result in a change in fuel economy.  
Road and traffic conditions may require you to shift  
at times other than those indicated.  
408  
18 FIT JAZZ-32T5A6100.book 409 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguShifting  
Reverse Lockout  
■
The manual transmission has a lockout mechanism that stops you from accidentally  
shifting into (R from a forward gear while the vehicle is moving above a certain  
speed.  
If you cannot shift to (R when the vehicle is stopped, do the following:  
1. Depress the clutch pedal, move the shift  
lever all the way to the left, and shift to (R.  
2. If you still cannot shift into (R, apply the  
parking brake, and turn the ignition switch  
to ACCESSORY (q or LOCK (0*1.  
3. Depress the clutch pedal and shift into (R.  
4. Keep depressing the clutch pedal and start  
the engine.  
Have your vehicle checked by a dealer if you  
have to go through this procedure repeatedly.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
409  
18 FIT JAZZ-32T5A6100.book 410 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
Continuously variable transmission models  
Auto Idle Stop  
1Auto Idle Stop  
To help to maximise fuel economy, the engine automatically stops when the vehicle  
comes to a stop, depending on environmental and vehicle operating conditions. The  
indicator (green) comes on.  
The 12-volt battery installed in this vehicle is  
specifically designed for a model with Auto Idle Stop.  
Using a battery other than this specified type may  
shorten the battery life, and prevent Auto Idle Stop  
from activating. If you need to replace the battery,  
make sure to select the specified type. Ask a dealer  
for more details.  
The engine then restarts once the vehicle is  
about to move again, or depending on  
environmental and vehicle conditions, and the  
indicator (green) goes off.  
2 The Engine Automatically Restarts When:  
2 Specifications P. 590  
P. 414  
If the driver’s door is opened while the  
indicator (green) is on, a buzzer sounds to  
Auto Idle Stop Indicator (green)  
notify you that the Auto Idle Stop function is  
in operation.  
A message associated with Auto Idle Stop appears on the multi-information display.  
2 Indicators P. 102, 103  
2 Multi-Information Display Warning and Information Messages P. 111  
2 Customized Features P. 131  
410  
18 FIT JAZZ-32T5A6100.book 411 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
1Auto Idle Stop System ON/OFF  
Auto Idle Stop System ON/OFF  
■
Pressing the Auto Idle Stop OFF button restarts the  
engine from the idling stop.  
To turn the Auto Idle Stop system off, press  
this button. The Auto Idle Stop system stops.  
u Auto Idle Stop system will stop and the  
indicator (amber) will come on.  
The Auto Idle Stop system is turned on every  
time you start the engine, even if you turned it  
off the last time you drove the vehicle.  
Auto Idle  
Stop  
Indicator  
(Amber)  
Continued  
411  
18 FIT JAZZ-32T5A6100.book 412 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
1Auto Idle Stop Activates When:  
Auto Idle Stop Activates When:  
■
Do not open a bonnet while the Auto Idle Stop  
function is activated.  
The vehicle stops with the shift lever in (D and the brake pedal depressed.  
If the bonnet is opened, the engine will not restart  
automatically.  
■ Auto Idle Stop does not activate when:  
• The driver’s seat belt is not fastened.  
In this case, restart the engine with the ignition  
switch or the ENGINE START/STOP button.  
2 Starting the Engine P. 392, 395  
• The engine coolant temperature is low or high.  
• The transmission fluid temperature is low or high.  
• The vehicle comes to a stop again before the vehicle speed reaches 5 km/h  
(3 mph) after the engine starts.  
Models with keyless access system  
• Stopped on a steep incline.  
Pressing the ENGINE START/STOP button changes  
the power mode to ACCESSORY even while Auto Idle  
Stop is in operation. Once in ACCESSORY, the engine  
no longer restarts automatically. Follow the standard  
procedure to start the engine.  
• The transmission is in a position other than (D.  
• The engine is started with the bonnet open.  
u Turn off the engine. Close the bonnet before you restart the engine to activate  
Auto Idle Stop.  
• The Auto Idle Stop OFF button is pressed.  
• The battery charge is low.  
2 Starting the Engine P. 395  
Models without keyless access system  
Even if you turn the ignition switch to START (e  
during the Auto Idle Stop activated, the engine does  
not start.  
• The internal temperature of the battery is 5°C or less.  
Models with capacitor unit  
• The capacitor unit condition is not good.  
u The capacitor unit is used for a condenser to charge or discharge in a short time.  
Models with climate control system  
• The climate control system is in use, and the outside temperature is below -20°C  
or over 40°C.  
• The climate control system is in use, and the temperature is set to Hi or Lo.  
•
is on (indicator on).  
Models with heating and cooling system  
• The fan is turned on and the mode control dial is turned to  
.
412  
18 FIT JAZZ-32T5A6100.book 413 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
■ Auto Idle Stop may not activate when:  
• The steering wheel is operated.  
• Altitude is high.  
• The vehicle is stopped by braking suddenly.  
• The vehicle is repeatedly accelerated and decelerated at a low speed.  
Models with climate control system  
• The climate control system is in use, and there is a significant difference between  
the set temperature and the actual interior temperature.  
• Humidity in the interior is high.  
• The fan speed is high.  
Continued  
413  
18 FIT JAZZ-32T5A6100.book 414 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
1The Engine Automatically Restarts When:  
The Engine Automatically Restarts When:  
■
If you are using an electronic device during Auto Idle  
Stop, the device may temporarily be turned off when  
the engine restarts.  
The brake pedal is released.  
■ The engine restarts even if the brake pedal is depressed when:  
• The Auto Idle Stop OFF button is pressed.  
• A steering wheel is operated.  
• The transmission is put into (R or (S, or taken out of (N and put into (D.  
• The pressure to the brake pedal is reduced and the vehicle starts moving while  
stopped on an incline.  
• The pressure on the brake pedal is repeatedly applied and released slightly during  
a stop.  
• The battery charge becomes low.  
• The accelerator pedal is depressed.  
• The driver’s seat belt is unlatched.  
Models with climate control system  
•
is ON (indicator on).  
• The climate control system is in use, and the difference between the set  
temperature and actual interior temperature becomes significant.  
• The climate control system is being used to dehumidify the interior.  
Models with heating and cooling system  
• The fan is turned on and the mode control dial is turned to  
.
Starting Assist Brake Function  
■
Briefly keeps the brake applied after releasing the brake pedal to restart the engine.  
This can keep your vehicle from unexpectedly moving while on an incline.  
414  
18 FIT JAZZ-32T5A6100.book 415 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
Manual transmission models  
Auto Idle Stop  
1Auto Idle Stop  
To help to maximise fuel economy, the engine automatically stops when the vehicle  
comes to a stop, depending on environmental and vehicle operating conditions. The  
indicator (green) comes on.  
The 12-volt battery installed in this vehicle is  
specifically designed for a model with Auto Idle Stop.  
Using a battery other than this specified type may  
shorten the battery life, and prevent Auto Idle Stop  
from activating. If you need to replace the battery,  
make sure to select the specified type. Ask a dealer  
for more details.  
The engine then restarts once the vehicle is  
about to move again, or depending on  
environmental and vehicle conditions, and the  
indicator (green) goes off.  
2 Specifications P. 590  
2 The Engine Automatically Restarts When:  
P. 414  
If the driver’s door is opened while the  
indicator (green) is on, a buzzer sounds to  
Auto Idle Stop Indicator (green)  
notify you that the Auto Idle Stop function is  
in operation.  
A message associated with Auto Idle Stop  
appears on the multi-information display.  
2 Indicators P. 102, 103  
2 Multi-Information Display Warning and  
Information Messages P. 111  
2 Customized Features P. 131  
Continued  
415  
18 FIT JAZZ-32T5A6100.book 416 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
1Auto Idle Stop System ON/OFF  
Auto Idle Stop System ON/OFF  
■
Pressing the Auto Idle Stop OFF button restarts the  
engine during the Auto Idle Stop activated.  
To turn the Auto Idle Stop system off, press  
this button. The Auto Idle Stop system stops.  
u Auto Idle Stop system will stop and the  
indicator (amber) will come on.  
The Auto Idle Stop system is turned on every  
time you start the engine, even if you turned it  
off the last time you drove the vehicle.  
Auto Idle  
Stop  
Indicator  
(Amber)  
416  
18 FIT JAZZ-32T5A6100.book 417 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
1Auto Idle Stop Activates When:  
Auto Idle Stop Activates When:  
■
Do not open a bonnet while the Auto Idle Stop  
function is activated.  
If the bonnet is opened, the engine will not restart  
automatically.  
After the vehicle moves forward, stopping with the brake, the clutch pedal fully  
depressed, the shift lever in (N, and then the clutch pedal is released.  
u To restart the engine automatically, keep the shift lever in (N.  
In this case, restart the engine with the ignition  
switch or the ENGINE START/STOP button.  
2 Starting the Engine P. 392, 395  
■ Auto Idle Stop does not activate when:  
• The driver’s seat belt is not fastened.  
• The engine coolant temperature is low or high.  
• The vehicle comes to a stop again before the vehicle speed reaches 3 km/h  
(2 mph) after the engine starts.  
• The shift lever is in any position except (N.  
• The engine is started with the bonnet open.  
u Turn off the engine. Close the bonnet before you restart the engine to activate  
Auto Idle Stop.  
• The Auto Idle Stop OFF button is pressed.  
• The battery charge is low.  
Models with keyless access system  
Pressing the ENGINE START/STOP button changes  
the power mode to OFF even while Auto Idle Stop is  
in operation. The engine no longer restarts  
automatically. Follow the standard procedure to start  
the engine.  
2 Starting the Engine P. 395  
Models without keyless access system  
Even if you turn the ignition switch to START (e  
during the Auto Idle Stop activated, the engine does  
not start.  
• The internal temperature of the battery is 5°C or less.  
Models with climate control system  
• The climate control system is in use, and the outside temperature is below -20°C  
or over 40°C.  
• The climate control system is in use, and the temperature is set to Hi or Lo.  
•
is on (indicator on).  
Models with heating and cooling system  
• The fan is turned on and the mode control dial is turned to  
.
Continued  
417  
18 FIT JAZZ-32T5A6100.book 418 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
■ Auto Idle Stop may not activate when:  
• The steering wheel is operated.  
• Altitude is high.  
Models with climate control system  
• The climate control system is in use, and there is a significant difference between  
the set temperature and the actual interior temperature.  
• Humidity in the interior is high.  
• The fan speed is high.  
1Engine Automatically Restarts When:  
Engine Automatically Restarts When:  
■
The engine does not restart automatically when there  
is a problem in the system. Follow the normal  
procedure to start the engine.  
The clutch pedal is depressed.  
2 Starting the Engine P. 392, 395  
■ The engine automatically restarts even if the clutch pedal is not depressed  
with the transmission in (N when:  
If you are using an electronic device during Auto Idle  
Stop, the device may temporarily be turned off when  
the engine restarts.  
• The Auto Idle Stop OFF button is pressed.  
• The pressure on the brake pedal is reduced and the vehicle starts moving while  
stopped on an incline.  
• The pressure on the brake pedal is repeatedly applied and released slightly during  
a stop.  
During Auto Idle Stop, the engine does not restart  
automatically if:  
• The driver’s seat belt is unlatched.  
To keep Auto Idle Stop activated, fasten your seat  
belt immediately.  
• The battery charge becomes low.  
• The steering wheel is operated.  
• The transmission is put into a position other than  
(N. Put the transmission into (N.  
2 Multi-Information Display Warning and  
Information Messages P. 114  
When the system stops operating, follow the normal  
procedure to start the engine.  
2 Starting the Engine P. 392, 395  
418  
18 FIT JAZZ-32T5A6100.book 419 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAuto Idle Stop  
1When indicator light (Green) blinks in Auto Idle Stop  
When indicator light (Green) blinks in Auto Idle Stop  
■
The indicator starts blinking rapidly under the  
following conditions:  
Models with climate control system  
Fully depress the clutch pedal.  
u The engine automatically restarts.  
•
(windscreen demister) is touched.  
• When the climate control system is in use and  
moisture builds up inside the vehicle.  
• When the climate control system is in use and the  
difference between the set temperature and the  
actual temperature inside the vehicle becomes  
significant.  
Models with heating and cooling system  
•
is on with the fan operating.  
419  
18 FIT JAZZ-32T5A6100.book 420 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguCruise Control  
Cruise Control  
Maintains a constant vehicle speed without having to keep your foot on the  
accelerator. Use cruise control on motorways or open roads where you can travel at  
a constant speed with little acceleration or deceleration.  
1Cruise Control  
3WARNING  
Improper use of the cruise control can lead  
to a crash.  
When to use  
■Vehicle speed for cruise control:  
Desired speed in a range from about  
Use the cruise control only when travelling  
on open motorways in good weather.  
Always keep sufficient distance between  
you and the vehicle in front of you.  
30 km/h (18 mph) to about 200 km/h  
(125 mph)  
Continuously variable transmission models  
■Shift positions for cruise control:  
In (D or (S  
It may not be possible to maintain a constant speed  
when driving uphill or downhill.  
When not using cruise control:  
Turn off cruise control by pressing the MAIN button.  
How to use  
The indicator is on in the upper part  
of the multi-information display.  
Manual transmission models  
When the engine speed slows down, try to  
downshift.  
Cruise control is ready to use.  
You can maintain the set speed if you change gear  
within five seconds.  
■Press the MAIN button  
on the steering wheel.  
Setting the power mode to ACCESSORY or VEHICLE  
OFF (LOCK) turns off cruise control automatically.  
You cannot use cruise control and the adjustable  
speed limiter at the same time.  
If a different indicator comes on, press the  
LIM button to switch to cruise control.  
420  
18 FIT JAZZ-32T5A6100.book 421 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguCruise Control  
To Set the Vehicle Speed  
■
The set speed appears when  
cruise control begins  
–/SET  
Button  
Press and release  
Take your foot off the pedal and press the –/SET button when you reach the desired  
speed.  
The moment you release the –/SET button, the set speed is fixed, and cruise control  
begins. The set speed is displayed.  
Continued  
421  
18 FIT JAZZ-32T5A6100.book 422 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguCruise Control  
1To Adjust the Vehicle Speed  
To Adjust the Vehicle Speed  
■
You can set the vehicle speed using the –/SET button  
on the steering wheel when adjusting the speed with  
the accelerator and brake pedals.  
Increase or decrease the vehicle speed using the RES/+ or –/SET buttons on the  
steering wheel.  
To increase speed  
To decrease speed  
• Each time you press the button, the vehicle speed is increased or decreased by  
about 1 km/h or 1 mph accordingly.  
• If you keep the button pressed, the vehicle speed increases or decreases by about  
10 km/h or 10 mph accordingly.  
1To Cancel  
To Cancel  
■
Resuming the prior set speed:  
After cruise control has been cancelled, you can still  
resume the prior set speed by pressing the RES/+  
button while driving at a speed of at least 30 km/h  
(18 mph) or more.  
To cancel cruise control, do any of the following:  
• Press the CANCEL button.  
• Press the MAIN button.  
• Press the LIM button.  
MAIN  
Button  
• Depress the brake pedal.  
You cannot set or resume in the following situations:  
• When vehicle speed is less than 30 km/h (18 mph)  
• When the MAIN button is turned off  
LIM  
Button  
CANCEL  
Button  
Manual transmission models  
• Depress the clutch pedal for five seconds or  
more.  
At vehicle speeds of 25 km/h (16 mph) or less, cruise  
control is cancelled automatically.  
The cruise control indicator and displayed set  
speed go off.  
422  
18 FIT JAZZ-32T5A6100.book 423 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAdjustable Speed Limiter  
Adjustable Speed Limiter  
This system enables you to set a maximum speed that cannot be exceeded even if  
you are depressing the accelerator pedal.  
The vehicle speed limit can be set from about 30 km/h (18 mph) to about 250 km/h  
(156 mph).  
1Adjustable Speed Limiter  
3
WARNING  
Adjustable Speed Limiter has limitations.  
It is always your responsibility to adjust the  
vehicle speed to obey the actual speed  
limit, and safely operate the vehicle.  
How to use  
The indicator is on in the instrument panel.  
Adjustable speed limiter is ready to use.  
3
WARNING  
Do not depress the accelerator pedal more  
■Press the MAIN button on the steering wheel  
than necessary.  
Maintain an appropriate accelerator pedal  
position depending on the vehicle speed.  
The adjustable speed limiter may not hold the set  
speed limit when driving downhill. If this occurs, slow  
down by depressing the brake pedal.  
If a different indicator comes on,  
press the LIM button to switch to  
the adjustable speed limiter.  
When not using the adjustable speed limiter:  
Turn off the adjustable speed limiter by pressing the  
MAIN button.  
You cannot use the adjustable speed limiter and  
cruise control or intelligent speed limiter* at the same  
time.  
Manual transmission models  
When the engine speed slows down, try to  
downshift.  
* Not available on all models  
Continued  
423  
18 FIT JAZZ-32T5A6100.book 424 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAdjustable Speed Limiter  
1To Set the Speed Limit  
To Set the Speed Limit  
■
If you set the speed limit while travelling at less than  
30 km/h (18 mph), the speed limit is set to 30 km/h  
(18 mph).  
On when the adjustable  
speed limiter is set  
The beeper sounds and the displayed speed limit blinks  
if the vehicle speed exceeds the limit by 3 km/h (2 mph)  
or more on a steep descent.  
The adjustable speed limiter is set to the current  
speed if it is higher than the previously set speed limit  
when you press the RES/+ button.  
RES/+  
Button  
–/SET  
Button  
Press and release  
• Take your foot off the pedal and press the -/SET button when you reach the  
desired speed.  
The moment you release the -/SET button, the speed limit is fixed, and the  
adjustable speed limiter is set. The speed limit is displayed.  
• You can set the previously set speed limit by pressing the RES/+ button.  
424  
18 FIT JAZZ-32T5A6100.book 425 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAdjustable Speed Limiter  
To Adjust the Speed Limit  
■
Increase or decrease the speed limit by using the RES/+ or -/SET buttons on the  
steering wheel.  
To increase speed  
To decrease speed  
• Each time you press the button, the speed limit increases or decreases by about  
1 km/h or 1 mph accordingly.  
• If you keep the button pressed, the speed limit increases or decreases in  
increments of 10 km/h or 10 mph every 0.5 second until system limit is reached.  
• The vehicle may accelerate or decelerate until the set speed is reached.  
1Exceeding the Speed Limit Temporarily  
Exceeding the Speed Limit Temporarily  
■
The beeper sounds when the vehicle speed goes  
higher than the set speed limit with the acceleration  
pedal depressed completely.  
The speed limit can be exceeded by depressing the accelerator pedal completely.  
u The displayed speed limit blinks.  
The beeper sounds once the speed limit has been exceeded.  
The adjustable speed limiter resumes working once  
the vehicle speed goes lower than the set speed limit.  
Continued  
425  
18 FIT JAZZ-32T5A6100.book 426 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAdjustable Speed Limiter  
1To Cancel  
To Cancel  
■
The adjustable speed limiter changes into cruise  
control if the LIM button is pressed.  
Models with intelligent speed limiter  
To cancel the adjustable speed limiter, do any  
of the following:  
• Press the CANCEL button.  
• Press the MAIN button.  
• Press the LIM button.  
MAIN  
Button  
The adjustable speed limiter changes into intelligent  
speed limiter if the LIM button is pressed.  
LIM  
Button  
CANCEL  
Button  
If there is a problem with the system when you are  
using the adjustable speed limiter, the beeper sounds  
and OFF comes on. The adjustable speed limiter will  
be turned off.  
426  
18 FIT JAZZ-32T5A6100.book 427 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguIntelligent Speed Limiter  
Models with traffic sign recognition system  
Intelligent Speed Limiter  
1Intelligent Speed Limiter  
Automatically sets the speed limit that the traffic sign recognition system detects.  
And the speed limit cannot be exceeded even if you are depressing the accelerator  
pedal. If you fully depress the accelerator the speed limit can be exceeded.  
2 Traffic Sign Recognition System* P. 442  
3
WARNING  
Intelligent Speed Limiter has limitations.  
The Intelligent Speed Limiter may set itself  
to a speed above or below the actual speed  
limit, or may not work, particularly where  
the traffic sign recognition system does not  
operate correctly or where a road has no  
speed limit signs. It is always your  
responsibility to adjust the speed to obey  
the actual speed limit and to safely operate  
the vehicle.  
Depending on the amount of depression of the  
accelerator pedal, the vehicle will accelerate until it  
reaches the speed identified by the traffic sign  
recognition system.  
* Not available on all models  
Continued  
427  
18 FIT JAZZ-32T5A6100.book 428 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguIntelligent Speed Limiter  
1Intelligent Speed Limiter  
How to use  
The system is designed to detect signs that follow the  
Vienna Convention standards. Not all signs may be  
detected, but any signs posted on roadsides should  
not be ignored. The system does not work on the  
designated traffic signs of all the countries you travel,  
nor in all situations.  
The indicator is on in the instrument panel.  
Intelligent speed limiter is ready to use.  
■Press the MAIN button  
on the steering wheel  
2 Traffic Sign Recognition System* P. 442  
If the intelligent speed limiter is set to the wrong  
speed limit, try one of the following:  
To cancel  
• Press the CANCEL button.  
• Press the MAIN button.  
• Press the LIM button.  
To exceed the speed limit temporarily  
• Depressing the accelerator pedal fully.  
The intelligent speed limiter may not hold the set  
speed limit when driving downhill. If this occurs, slow  
down by depressing the brake pedal.  
If a different indicator comes on, press the LIM button  
to change it to the intelligent speed limiter.  
When not using the intelligent speed limiter, turn off  
the intelligent speed limiter by pressing the MAIN  
button.  
You cannot use the intelligent speed limiter and  
cruise control or adjustable speed limiter at the same  
time.  
* Not available on all models  
428  
18 FIT JAZZ-32T5A6100.book 429 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguIntelligent Speed Limiter  
1Intelligent Speed Limiter  
To Set the Speed Limit  
■
Manual transmission models  
When the engine speed slows down, try to downshift.  
Do not use the intelligent speed limiter in areas of  
different units from the display unit of the intelligent  
speed limiter.  
On when the intelligent speed limiter is  
set to the speed limit that the traffic sign  
recognition system detects.  
Right-hand drive type  
Change the displayed measurement of the set vehicle  
speed to the same units as the driving areas.  
2 Customized Features P. 131  
RES/+  
Button  
1To Set the Speed Limit  
If you set the intelligent speed limiter when the speed  
limit that the traffic sign recognition system detects is  
less than 30 km/h (20 mph), the speed limitation  
function and warning function may switch to pause.  
–/SET  
Button  
Press and release  
If your vehicle speed is higher than the speed limit  
that the traffic sign recognition system detects, your  
vehicle decelerates slowly to the speed limit or less. If  
necessary, slow down by depressing the brake pedal.  
And the beeper sounds and the displayed speed limit  
blinks if the vehicle speed exceeds the limit by 3 km/h  
(2 mph) or more.  
• The moment you release the -/SET button or RES/+ button, the intelligent speed  
limiter is set to the speed limit that the traffic sign recognition system detects. The  
speed limit is displayed.  
Continued  
429  
18 FIT JAZZ-32T5A6100.book 430 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguIntelligent Speed Limiter  
■ When the traffic sign recognition system detects the new speed limit sign  
The intelligent speed limiter is set to the new speed limit that the traffic sign  
recognition system detects.  
1To Set the Speed Limit  
The intelligent speed limiter may also switch to pause  
when the traffic sign recognition system detects only  
additional speed limit signs.  
■ The speed limitation function and warning function may switch to pause  
if there is no speed limit sign in the screen of the traffic sign recognition  
system when:  
• The end of speed limit or other designated limit is detected.  
• Your vehicle enters/exits motorway or highway.  
• You make a turn with a turn signal to change direction at an intersection.  
430  
18 FIT JAZZ-32T5A6100.book 431 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguIntelligent Speed Limiter  
■ When the traffic sign recognition system detects the speed limit sign  
while the intelligent speed limiter is paused  
The speed limitation function and warning function will be resumed automatically.  
■ When the traffic sign recognition system does not detect the speed limit  
sign for a time while the intelligent speed limiter is activated  
While driving, in addition to when the traffic sign recognition system detects no  
speed limit sign, the traffic sign recognition system may display no speed limit. But,  
intelligent speed limiter functions continue.  
Continued  
431  
18 FIT JAZZ-32T5A6100.book 432 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguIntelligent Speed Limiter  
1To Adjust the Speed Limit  
To Adjust the Speed Limit  
■
A negative or positive offset with respect to the  
speed limit will be reset automatically when the  
traffic sign recognition system detects the new speed  
limit sign.  
Increase or decrease the speed limit by using the RES/+ or -/SET buttons on the  
steering wheel.  
To increase speed  
You cannot decrease the speed limit less than 30 km/h  
(18 mph).  
To decrease speed  
• Each time you press the button, the speed limit is increased or decreased by about  
1 km/h or 1 mph accordingly.  
• You can increase the speed limit until +10 km/h or +5 mph on the basis of the  
speed limit that the traffic sign recognition system detects.  
• You can decrease the speed limit until -10 km/h or -5 mph on the basis of the  
speed limit that the traffic sign recognition system detects.  
• You can accelerate until the set speed is reached. If your vehicle speed is higher  
than the speed limit that the traffic sign recognition system detects, your vehicle  
decelerates slowly to the speed limit.  
1Exceeding the Speed Limit Temporarily  
The beeper sounds when the vehicle speed goes  
higher than the set speed limit with the acceleration  
pedal depressed completely.  
Exceeding the Speed Limit Temporarily  
■
The speed limit can be exceeded by depressing the accelerator pedal fully.  
u The displayed speed limit blinks.  
The intelligent speed limiter resumes working once  
the vehicle speed goes lower than the set speed limit.  
The beeper sounds once the speed limit has been exceeded.  
432  
18 FIT JAZZ-32T5A6100.book 433 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguIntelligent Speed Limiter  
1To Cancel  
To Cancel  
■
The intelligent speed limiter changes into cruise  
control if the LIM button is pressed.  
To cancel the intelligent speed limiter, do any  
of the following:  
MAIN  
Button  
• Press the CANCEL button.  
• Press the MAIN button.  
• Press the LIM button.  
LIM  
Button  
CANCEL  
Button  
If there is a problem with the system or traffic sign  
recognition system when you are using the intelligent  
speed limiter, the beeper sounds and OFF comes on.  
The intelligent speed limiter will be turned off.  
2 Traffic Sign Recognition System* P. 442  
* Not available on all models  
433  
18 FIT JAZZ-32T5A6100.book 434 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguForward Collision Warning  
Forward Collision Warning*  
*
Alerts you when it determines that there is a possibility that your vehicle may collide  
with a vehicle detected in front of yours.  
1Forward Collision Warning  
Important Safety Reminder  
Forward Collision Warning cannot detect all objects  
ahead and may not detect a given object; accuracy of  
the system will vary based on weather, speed and  
other factors. Forward Collision Warning does not  
include a braking function. It is always your  
responsibility to safely operate the vehicle and avoid  
collisions.  
If the system determines a collision is possible, it gives both visual and audible alerts.  
u Take appropriate action to prevent a collision (apply the brakes, change lanes,  
etc.).  
■ How the system works  
The system may give warnings of potential collisions when your vehicle speed is  
above 15 km/h (9 mph).  
You can change the Forward Collision Warning  
Distance setting or turn the system on and off.  
2 Customized Features P. 131  
You can set Far, Normal or Near for when warnings start:  
The camera is shared with Lane Departure Warning,  
Traffic Sign Recognition System and High beam  
Support System.  
Far  
Normal  
Near  
Your Vehicle  
Vehicle Ahead  
* Not available on all models  
434  
18 FIT JAZZ-32T5A6100.book 435 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguForward Collision Warning  
*
1Forward Collision Warning  
Never apply a film or attach any objects to the  
windscreen that could obstruct the Forward Collision  
Warning camera’s field of vision.  
The camera is located  
behind the rearview mirror.  
Scratches, nicks, and other damage to the  
windscreen within the Forward Collision Warning  
camera’s field of vision can cause the system to  
operate abnormally. If this occurs, we recommend  
that you replace the windscreen with a genuine  
Honda replacement windscreen. Making even minor  
repairs within the camera’s field of vision or installing  
an aftermarket replacement windscreen may also  
cause the system to operate abnormally.  
After replacing the windscreen, have a dealer  
recalibrate the camera. Proper calibration of the  
Forward Collision Warning camera is necessary for  
the system to operate properly.  
For the system’s proper operation:  
• Do not impact the camera or the area around the  
camera when you clean the windscreen.  
• Keep the upper windscreen clean. Wipe away any  
debris including ice and frost.  
The beeper sounds and  
the multi-information display until a  
possible collision is avoided.  
appears in  
Consult a dealer in the following cases.  
• The camera or the area around the camera is  
severely impacted.  
• The area around the windscreen needs repair.  
* Not available on all models  
Continued  
435  
18 FIT JAZZ-32T5A6100.book 436 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguForward Collision Warning  
■ Automatic shutoff  
Forward Collision Warning may automatically shut itself off and the  
comes and stays on when:  
1Automatic shutoff  
indicator  
To help to reduce the likelihood that high interior  
temperatures will cause the camera system to shut  
off, when parking, find a shady area or face the front  
of the vehicle away from the sun.  
If you use a reflective sun shade, do not allow it to  
cover the camera housing. Covering the camera can  
concentrate heat on the camera.  
• The temperature inside the system is high.  
• The windscreen is blocked by dirt, mud, leaves, wet snow, etc.  
Once the conditions that caused Forward Collision Warning to shut off improve or  
are addressed (e.g., cleaning), the system comes back on.  
If the system cannot operate:  
appears:  
• Use the heating and cooling system*/climate  
control system* to cool down the interior and, if  
necessary, the demister mode when windows are  
fogged.  
• Start driving the vehicle to lower the windscreen  
temperature, which cools down the area around  
the Forward Collision Warning camera.  
If the system cannot operate:  
appears:  
Park your vehicle in a safe place. Wipe away debris  
blocking the windscreen, then start driving again. If  
the symbol remains on even after driving for a while  
with the clean windscreen, have your vehicle checked  
by a dealer.  
* Not available on all models  
436  
18 FIT JAZZ-32T5A6100.book 437 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguForward Collision Warning  
Forward Collision Warning Limitations  
■
Forward Collision Warning may not activate or may not detect a vehicle in front of  
your vehicle, and may activate even when you are aware of a vehicle ahead of you,  
or when there is no vehicle ahead, under the following conditions.  
Condition  
●
The distance between your vehicle and the vehicle ahead of you is too short.  
A vehicle cuts in front of you at a slow speed, and it brakes suddenly.  
A vehicle suddenly crosses in front of you.  
When either your vehicle or the vehicle ahead of you accelerates rapidly.  
●
●
●
●
The vehicle ahead of you is a motorcycle, a small vehicle, or a unique vehicle such as a tractor.  
When you drive off-road or on a mountain road, or curved and winding road for an extended period that makes it difficult for the  
camera to properly detect a vehicle in front of you.  
When there are pedestrians or animals in front of your vehicle.  
When you drive in bad weather (rain, fog, etc.).  
A heavy load in the rear or modifications to the suspension tilts your vehicle.  
An abnormal tyre condition is detected (wrong tyre size, flat tyre, etc.).  
When the windscreen is blocked by dirt, mud, leaves, wet snow, etc.  
When the temperature inside the system is high.  
A sudden change between light and dark such as an entrance or exit of a tunnel.  
You drive into the sunlight (e.g. at dawn or dusk).  
●
●
●
●
●
●
●
●
●
●
●
●
●
●
When the windscreen is dirty or cloudy.  
When streetlights are perceived as the taillight of a vehicle in front of yours.  
When driving at night, the vehicle ahead of you is running with either taillight bulb burned out.  
When you drive in the shadows of trees, buildings, etc.  
When your vehicle is towing a trailer.  
437  
18 FIT JAZZ-32T5A6100.book 438 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguLane Departure Warning  
Lane Departure Warning*  
*
Alerts you when the system determines a possibility of your vehicle unintentionally  
crossing over detected lane markings.  
1Lane Departure Warning  
Important Safety Reminder  
Like all assistance systems, Lane Departure Warning  
has limitations.  
Over-reliance on Lane Departure Warning may result  
in a collision. It is always your responsibility to keep  
the vehicle within your driving lane.  
How the System Works  
■
If your vehicle is getting too close to detected  
left or right side lane markings without a turn  
signal activated, Lane Departure Warning will  
give audible and visual alerts.  
Lane Departure Warning only alerts you when lane  
drift is detected without a turn signal in use. Lane  
Departure Warning may not detect all lane markings  
or lane departures; accuracy will vary based on  
weather, speed and lane marker condition. It is  
always your responsibility to safely operate the  
vehicle and avoid collisions.  
The beeper sounds and  
appears on the  
multi-information display, letting you know  
that you need to take appropriate action.  
The Lane Departure Warning may not work properly  
or may work improperly under the certain conditions:  
2 Lane Departure Warning Conditions and  
Limitations P. 440  
1How the System Activates  
How the System Activates  
■
Lane Departure Warning may automatically shut off  
The system begins to search for lane markings when all the following conditions are  
met:  
and the  
indicator comes and stays on.  
2 Indicators P. 105  
• The vehicle is travelling above 72 km/h (45 mph).  
• The vehicle is on a straight or slightly curved road.  
• The turn signals are off.  
• The brake pedal is not depressed.  
* Not available on all models  
438  
18 FIT JAZZ-32T5A6100.book 439 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguLane Departure Warning  
1Lane Departure Warning Camera  
Lane Departure Warning Camera  
■
Never apply a film or attach any objects to the  
windscreen that could obstruct the Lane Departure  
Warning camera’s field of vision.  
The camera is located behind the rearview  
mirror.  
Camera  
Scratches, nicks, and other damage to the  
windscreen within the Lane Departure Warning  
camera’s field of vision can cause the system to  
operate abnormally. If this occurs, we recommend  
that you replace the windscreen with a genuine  
Honda replacement windscreen. Making even minor  
repairs within the camera’s field of vision or installing  
an aftermarket replacement windscreen may also  
cause the system to operate abnormally.  
After replacing the windscreen, have a dealer  
recalibrate the camera. Proper calibration of the Lane  
Departure Warning camera is necessary for the  
system to operate properly.  
Lane Departure Warning On and Off  
■
Press the Lane Departure Warning button to  
Indicator  
Button  
turn the system on and off.  
u The indicator in the button comes on  
when the system is on.  
Do not place an object on the top of the instrument  
panel. It may reflect onto the windscreen and prevent  
the system from detecting lane lines properly.  
To help to reduce the likelihood that high interior  
temperatures will cause the camera system to shut  
off, when parking, find a shady area or face the front  
of the vehicle away from the sun.  
If you use a reflective sun shade, do not allow it to  
cover the camera housing. Covering the camera can  
concentrate heat on the camera.  
Continued  
439  
18 FIT JAZZ-32T5A6100.book 440 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguLane Departure Warning  
1Lane Departure Warning Camera  
If the message appears:  
• Use the heating and cooling system*/climate  
control system* to cool down the interior and, if  
necessary, the demister mode when windows are  
fogged.  
Lane Departure Warning Conditions and Limitations  
■
Lane Departure Warning may not activate or may not recognize lanes, and may  
activate even when keeping in the middle of a lane, under certain conditions. Some  
examples of these conditions are listed below.  
• Start driving the vehicle to lower the windscreen  
temperature, which cools down the area around  
the Lane Departure Warning camera.  
■ Environmental conditions  
• Driving in bad weather (rain, fog, snow, etc.).  
• Sudden changes between light and dark, such as an entrance or exit of a tunnel.  
• There is little contrast between lane lines and the roadway surface.  
• Driving into low sunlight (e.g., at dawn or dusk).  
• Strong light is reflected onto the roadway.  
• Driving in the shadows of trees, buildings, etc.  
• Shadows of adjacent objects are parallel to lane markings.  
• Roadway objects or structures are misinterpreted as lane markers.  
• Reflections on the interior of the front windscreen.  
If the  
message appears:  
Park your vehicle in a safe place. Wipe away debris  
blocking the windscreen, then start driving again. If  
the message remains on even after driving for a while  
with the clean windscreen, have your vehicle checked  
by a dealer.  
* Not available on all models  
440  
18 FIT JAZZ-32T5A6100.book 441 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguLane Departure Warning  
■ Roadway conditions  
• Driving on a snowy or wet roadway (obscured lane marking, vehicle tracks,  
reflected lights, road spray, high contrast).  
• Driving on a road with temporary lane markings.  
• Faint, multiple, or varied lane markings are visible on the roadway due to road  
repairs or old lane markings.  
• The roadway has merging, split, or crossing lines (e.g., such as at an intersection  
or crosswalk).  
• The lane markings are extremely narrow, wide, or changing.  
• The vehicle in front of you is driving near the lane lines.  
• The road is hilly or the vehicle is approaching the crest of a hill.  
• Driving on rough or unpaved roads, or over bumpy surfaces.  
• When objects on the road (curb, guard rail, pylons, etc.) are recognised as white  
lines (or yellow lines).  
• When driving on roads with double lines.  
■ Vehicle conditions  
• Headlight lenses are dirty or the headlights are not properly adjusted.  
• The outside of the windscreen is blocked by dirt, mud, leaves, wet snow, etc.  
• The inside of the windscreen is fogged.  
• The camera temperature gets too hot.  
• An abnormal tyre or wheel condition (wrong sized, varied size or construction,  
improperly inflated, compact spare tyre*, etc.).  
• The vehicle is tilted due to a heavy load or suspension modifications.  
• When tyre chains are installed.  
* Not available on all models  
441  
18 FIT JAZZ-32T5A6100.book 442 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguTraffic Sign Recognition System  
Traffic Sign Recognition System*  
*
Reminds you of road sign information, such as the current speed limit and that  
overtaking is prohibited, your vehicle has just passed through, showing it on the  
multi-information display.  
1Traffic Sign Recognition System  
The system is designed to detect signs that follow the  
Vienna Convention standards. Not all signs may be  
displayed, but any signs posted on roadsides should  
not be ignored.  
The Traffic Sign Recognition System is designed to  
merely provide driving assistance. The driver must still  
be aware of the road conditions and comply with all  
road regulations. Certain conditions, such as below,  
may disrupt the system’s proper operations.  
• The upper part of the windscreen is fogged or  
frosted, or is blocked by dirt, mud, leaves, wet  
snow, etc.  
How the System Works  
■
When the camera located behind the rearview mirror captures traffic signs while  
driving, the system displays the ones that are recognised as designated for your  
vehicle. The sign icon will be displayed for a while until the vehicle reaches a  
predetermined time and distance.  
• Dew condensation is formed on the windscreen.  
The sign icon also may switch to another one or disappear when:  
• The end of speed limit or other designated limit is detected.  
• Your vehicle enters/exists motorway or highway.  
• You make a turn with a turn signal to change direction at an intersection.  
* Not available on all models  
442  
18 FIT JAZZ-32T5A6100.book 443 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguTraffic Sign Recognition System  
*
If the system does not detect any traffic signs while you are driving, the image below  
may appear.  
1Traffic Sign Recognition System  
If the system cannot operate:  
appears:  
• Use the heating and cooling system* /climate  
control system* to cool down the interior and, if  
necessary, the demister mode when windows are  
fogged.  
• Start driving the vehicle to lower the windscreen  
temperature, which cools down the area around  
the system camera.  
If the system cannot operate:  
appears:  
Park your vehicle in a safe place. Wipe away debris  
blocking the windscreen, then start driving again. If  
the symbol remains on even after driving for a while  
with the clean windscreen, have your vehicle checked  
by a dealer.  
Condition  
●
The sign is covered with dirt, snow, or frost.  
The ambient brightness is too dark.  
In bad weather (heavy rain, fog, snow, etc.)  
●
●
If  
appears in amber on the multi-information  
display while driving, the system may have  
malfunctioned.  
Have your vehicle checked by a dealer.  
●
Faded signs  
Signs positioned on bends  
Rotated or damaged signs  
●
●
●
Concealed or poorly positioned signs  
When the windscreen is blocked by dirt, mud, leaves, wet snow, etc.  
When the temperature inside the system is high.  
A sudden change between light and dark such as an entrance or exit of a tunnel.  
You drive into the sunlight (e.g. at dawn or dusk).  
When the windscreen is dirty or cloudy.  
When you drive in the shadows of trees, buildings, etc.  
In a situation above, you may also see this icon. The  
system is temporarily cancelled.  
●
●
●
●
●
●
* Not available on all models  
Continued  
443  
18 FIT JAZZ-32T5A6100.book 444 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguTraffic Sign Recognition System  
Signs Displayed on the Multi-Information Display  
■
Two traffic signs can be simultaneously displayed next to each other when detected.  
The speed limit sign icon is displayed on the right half of the screen. The overtaking  
prohibition sign icon appears on the left. Any additional sign that indicates speed  
limit based on weather (rain, snow, etc.) or specific period of time can appear on  
either side.  
■When main mode is selected  
Speed  
Limit  
Sign  
Speed  
Limit  
Sign  
Overtaking  
Prohibition  
Sign*1  
Additional  
Speed Limit  
Sign Based on  
Conditions*2  
■When main mode is not selected  
Speed Limit Sign  
Overtaking  
Prohibition  
Sign*1  
Depending on situation, *1 can be replaced with *2, or *2 can appear on the right side.  
444  
18 FIT JAZZ-32T5A6100.book 445 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuWhen DrivinguTraffic Sign Recognition System  
■ Selecting to display traffic signs when main mode is off  
You can continue displaying reduced-size traffic sign icon on the multi-information  
display even while the main mode is not selected.  
2 Customized Features P. 131  
445  
18 FIT JAZZ-32T5A6100.book 446 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguVehicle Stability Assist (VSA) System  
Vehicle Stability Assist (VSA) System  
VSA helps to stabilise the vehicle during cornering if the vehicle turns more or less  
than what was intended. It also assists in maintaining traction on slippery surfaces.  
It does so by regulating engine output and selectively applying the brakes.  
1Vehicle Stability Assist (VSA) System  
The VSA may not function properly if tyre type and  
size are mixed. Make sure to use the same size and  
type of tyre, and the air pressures as specified.  
VSA Operation  
■
When the VSA system indicator comes on and stays  
on while driving, there may be a problem with the  
system. While this may not interfere with normal  
driving, have your vehicle checked by a dealer  
immediately.  
When VSA activates, you may notice that the  
engine does not respond to the accelerator.  
You may also notice some noise from the  
hydraulic system. You will also see the  
indicator blink.  
VSA System Indicator  
VSA cannot enhance stability in all driving situations  
and does not control the entire braking system. You  
still need to drive and corner at speeds appropriate  
for the conditions and always leave a sufficient  
margin of safety.  
The Main function of the VSA system is generally  
known as Electronic Stability Control (ESC). The  
system also includes a traction control function.  
446  
18 FIT JAZZ-32T5A6100.book 447 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguVehicle Stability Assist (VSA) System  
1Vehicle Stability Assist (VSA) System  
VSA On and Off  
■
In certain unusual conditions when your vehicle gets  
stuck in shallow mud or fresh snow, it may be easier  
to free it with the VSA temporarily switched off.  
This button is on the driver side control panel.  
To partially disable VSA functionality/features,  
press and hold it until you hear a beep.  
VSA OFF Indicator  
When the  
button is pressed, the traction control  
function becomes less effective. This allows for the  
wheels to spin more freely at low speed. You should  
only attempt to free your vehicle with the VSA off if  
you are not able to free it when the VSA is on.  
Your vehicle will have normal braking and  
cornering ability, but traction control function  
will be less effective.  
To restore VSA functionality/features, press  
Immediately after freeing your vehicle, be sure to  
switch VSA on again. We do not recommend driving  
your vehicle with the VSA system switched off.  
the  
(VSA OFF) button until you hear a  
beep.  
You may hear a motor sound coming from the  
engine compartment while system checks are being  
performed immediately after starting the engine or  
while driving. This is normal.  
VSA is turned on every time you start the  
engine, even if you turned it off the last time  
you drove the vehicle.  
447  
18 FIT JAZZ-32T5A6100.book 448 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAgile Handling Assist  
Agile Handling Assist  
Lightly brakes each of the front and rear wheels, as needed, when you turn the  
steering wheel, and helps support the vehicle’s stability and performance during  
cornering.  
1Agile Handling Assist  
The agile handling assist cannot enhance stability in  
all driving situations. You still need to drive and  
corner at speeds appropriate for the conditions and  
always leave a sufficient margin of safety.  
When the VSA system indicator comes on and stays  
on while driving, the agile handling assist does not  
activate.  
You may hear a sound coming from the engine  
compartment while the agile handling assist is  
activated. This is normal.  
448  
18 FIT JAZZ-32T5A6100.book 449 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguDeflation Warning System  
Deflation Warning System  
Instead of directly measuring the pressure in each tyre, the deflation warning system  
on this vehicle monitors and compares the rolling radius and rotational  
characteristics of each wheel and tyre while you are driving to determine if one or  
more tyres are significantly under-inflated. This will cause the low tyre pressure/  
deflation warning system indicator to come on and a message to appear on the  
multi-information display.  
1Deflation Warning System  
The system does not monitor the tyres when driving  
at low speed.  
Conditions such as low ambient temperature and  
altitude change directly affect tyre pressure and can  
trigger the low tyre pressure/deflation warning  
system indicator to come on.  
Tyre pressure checked and inflated in:  
• Warm weather can become under-inflated in  
colder weather.  
• Cold weather can become over-inflated in warmer  
weather.  
Deflation Warning System Calibration  
■
You must start deflation warning system calibration every time you:  
• Adjust the pressure in one or more tyres.  
• Rotate the tyres.  
The low tyre pressure indicator will not come on as a  
result of over inflation.  
• Replace one or more tyres.  
The deflation warning system may not function  
properly if tyre type and size are mixed.  
Make sure to use the same size and type of tyre.  
2 Checking and Maintaining Tyres P. 515  
Before calibrating the deflation warning system:  
• Set the cold tyre pressure in all four tyres.  
Make sure:  
• The vehicle is at a complete stop.  
The low tyre pressure/deflation warning system  
indicator may come on with a delay or may not come  
on at all when:  
Manual transmission models  
• You rapidly accelerate, decelerate, or turn the  
steering wheel.  
• You drive on snowy or slippery roads.  
• Snow chains are used.  
• The parking brake is applied.  
Continuously variable transmission models  
• The shift lever is in (P.  
All models  
• The ignition switch is in ON (w*1.  
The low tyre pressure/deflation warning system  
indicator may come on under the following conditions:  
• A compact spare tyre* is used.  
• There is a heavier and uneven load on the tyres,  
such as when towing a trailer, than the condition at  
calibration.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
• Snow chains are used.  
* Not available on all models  
Continued  
449  
18 FIT JAZZ-32T5A6100.book 450 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguDeflation Warning System  
You can calibrate the system from the  
customized features on the multi-information  
display.  
1Deflation Warning System Calibration  
• Deflation Warning System cannot be calibrated if a  
compact spare tyre* is installed.  
• The calibration process requires approximately 30  
minutes of cumulative driving at speeds between  
40–100 km/h (25–62 mph).  
• During this period, if the ignition switch*1 is turned  
on and the vehicle is not moved within 45 seconds,  
you may notice the low tyre pressure indicator  
comes on briefly. This is normal and indicates that  
the calibration process is not yet complete.  
1. Press the  
(customize settings) appears on the display,  
then press the SEL/RESET button.  
2. Press the  
Warning System appears on the display,  
then press the SEL/RESET button.  
u The display switches to the  
button until  
button until Deflation  
customization setup screen, where you  
can select Cancel or Initialise.  
If the snow chains are installed, remove them before  
calibrating the deflation warning system.  
3. Press the  
button and select  
Initialise, then press the SEL/RESET  
button.  
u Completed screen appears, then the  
display returns to the customization  
menu screen.  
If the low tyre pressure/deflation warning system  
indicator comes on even when the properly inflated  
specified regular tyres are installed, have the vehicle  
checked by a dealer.  
We recommend that the tyres be replaced with the  
same brand, model, and size as the originals. Ask a  
dealer for details.  
4. Press the  
button until  
(Exit)  
appears on the display, then press the SEL/  
RESET button.  
• The display returns to the normal screen.  
• The calibration process finishes  
automatically.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
450  
18 FIT JAZZ-32T5A6100.book 451 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAdjusting Headlight Distribution  
Adjusting Headlight Distribution  
Driving the right-hand type vehicle in right-hand traffic, or the left-hand type vehicle  
in left-hand traffic causes headlight glare to oncoming vehicles. You need to alter  
the headlight beam distribution using masking tape.  
1Adjusting Headlight Distribution  
Be careful not to adhere the tape to an incorrect  
location. If the headlight beam is distributed  
incorrectly, it may not comply with your country’s  
legal requirements. Ask your dealer for details.  
Models with halogen headlights  
Right-hand drive type vehicle  
Left-hand drive type vehicle  
5 mm (0.2 in)  
8 mm (0.3 in)  
12 mm  
(0.5 in)  
19°  
12 mm  
(0.5 in)  
20 mm  
(0.8 in)  
19°  
Centre point  
Centre point  
5 mm (0.2 in)  
8 mm  
(0.3 in)  
12 mm  
(0.5 in)  
20 mm  
(0.8 in)  
19°  
12 mm  
(0.5 in)  
19°  
Centre point  
Centre point  
1. Prepare for two rectangular pieces of masking tape, measuring 24 mm (0.9 in)  
wide and 113 mm (4.4 in) long, and 28 mm (1.1 in) wide and 143 mm (5.6 in)  
long.  
u Use masking tape that can shut out light, such as seal type waterproof vinyl.  
2. Affix the tape to the lens as shown.  
u The label is inclined downward at 19°.  
Continued  
451  
18 FIT JAZZ-32T5A6100.book 452 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen DrivinguAdjusting Headlight Distribution  
Models with LED headlights  
52 mm 51 mm  
(2.0 in) (2.0 in)  
51 mm  
52 mm  
(2.0 in)  
(2.0 in)  
64 mm  
(2.5 in)  
64 mm  
(2.5 in)  
89 mm  
(3.5 in)  
89 mm  
(3.5 in)  
Centre Point  
Centre Point  
1. Prepare for two rectangular pieces of masking tape, measuring 89 mm (3.5 in)  
wide and 103 mm (4.1 in) long.  
u Use masking tape that can shut out light, such as seal type waterproof vinyl.  
2. Affix the tape to the lens as shown.  
452  
18 FIT JAZZ-32T5A6100.book 453 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Braking  
Brake System  
1Parking Brake  
Parking Brake  
■
NOTICE  
Use the parking brake to keep the vehicle stationary when parking.  
To apply:  
Release the parking brake fully before driving. The  
rear brakes and axle can be damaged if you drive  
with the parking brake applied.  
Pull the lever fully up without pressing the  
release button.  
If you start driving without fully releasing the parking  
brake, a buzzer sounds as a warning, and  
appears on the multi-information display.  
Always apply the parking brake when parking.  
To release:  
1. Pull the lever slightly, and press and hold  
the release button.  
2. Lower the lever down all the way, then  
release the button.  
Continued  
453  
18 FIT JAZZ-32T5A6100.book 454 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBrakinguBrake System  
1Foot Brake  
Foot Brake  
■
Check the brakes after driving through deep water,  
or if there is a buildup of road surface water. If  
necessary, dry the brakes by lightly depressing the  
pedal several times.  
Your vehicle is equipped with disc brakes at all four wheels. A vacuum power assist  
helps to reduce the effort needed on the brake pedal. The brake assist system  
increases the stopping force when you depress the brake pedal hard in an  
emergency situation. The anti-lock brake system (ABS) helps you to retain steering  
control when braking very hard.  
If you hear a continuous metallic friction sound when  
applying the brakes, the brake pads need to be  
replaced. Have the vehicle checked by a dealer.  
2 Brake Assist System P. 456  
2 Anti-lock Brake System (ABS) P. 455  
Constantly using the brake pedal while going down a  
long hill builds up heat, which reduces the brake  
effectiveness. Apply engine braking by taking your  
foot off the accelerator pedal and downshifting to a  
lower gear/speed position. With manual transmission  
use a lower gear for greater engine braking.  
Do not rest your foot on the brake pedal while  
driving, as it will lightly apply the brakes and cause  
them to lose effectiveness over time and reduce pad  
life. It will also confuse drivers behind you.  
454  
18 FIT JAZZ-32T5A6100.book 455 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBrakinguAnti-lock Brake System (ABS)  
Anti-lock Brake System (ABS)  
1Anti-lock Brake System (ABS)  
ABS  
■
NOTICE  
Helps to prevent the wheels from locking up, and helps you retain steering control  
by pumping the brakes rapidly, much faster than you.  
The ABS may not function if you use a tyre of the  
wrong size or type.  
The electronic brake distribution (EBD) system, which is part of the ABS, also  
balances the front-to-rear braking distribution according to vehicle loading.  
If the ABS indicator comes on while driving, there  
may be a problem with the system. While normal  
braking will not be affected, there is a possibility that  
the ABS will not operating. Have your vehicle  
checked by a dealer immediately.  
You should never pump the brake pedal. Let the ABS work for you by always  
keeping firm, steady pressure on the brake pedal. This is sometimes referred to as  
“stomp and steer.”  
The ABS is not designed for the purpose of reducing  
the time or distance it takes for a vehicle to stop: It is  
designed to limit brake lockup which can lead to  
skidding and loss of steering control.  
■ ABS operation  
The brake pedal may pulsate slightly when the ABS is working. Keep holding the  
pedal firmly down. On dry pavement, you will need to press on the brake pedal very  
hard before the ABS activates. However, you may feel the ABS activate immediately  
if you are trying to stop on snow or ice.  
In the following cases, your vehicle may need more  
distance to stop than a vehicle without the ABS:  
• You are driving on rough or uneven road surfaces,  
such as gravel or snow.  
When the vehicle speed goes under 10 km/h, the ABS stops.  
• The tyres are equipped with tyre chains.  
You may hear a motor sound coming from the  
engine compartment while system checks are being  
performed immediately after starting the engine or  
while driving. This is normal.  
455  
18 FIT JAZZ-32T5A6100.book 456 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBrakinguBrake Assist System  
Brake Assist System  
Brake Assist System  
■
Is designed to assist the driver by generating greater braking force when you depress  
the brake pedal hard during emergency braking.  
■ Brake assist system operation  
Press the brake pedal firmly for more powerful braking.  
When brake assist operates, the pedal may wiggle slightly and an operating noise  
may be heard. This is normal. Keep holding the brake pedal firmly down.  
456  
18 FIT JAZZ-32T5A6100.book 457 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBrakinguCity-Brake Active system  
City-Brake Active system  
Can assist you when driving at a low speed, and there is a possibility of your vehicle  
colliding with a vehicle detected right in front of yours. The City-Brake Active system  
is designed to alert you when a potential collision is determined, as well as to reduce  
your vehicle speed when a collision is deemed unavoidable to help to minimise  
collision severity.  
1City-Brake Active system  
3WARNING  
Do not rely on the city-brake active system  
to avoid every possible frontal collision.  
Failure to pay close attention to a vehicle  
ahead of you, and to operate the brake  
pedal appropriately according to the  
situation can cause serious injury or death.  
How the System Works  
■
A laser sensor starts to monitor if there is a vehicle in front of you when your  
vehicle speed is between about 5 km/h (3 mph) and about 32 km/h (20 mph).  
For the system to work properly:  
• Always keep the upper part of the windscreen  
clean. Wipe away any dirt, ice, frost, etc.  
• Do not impact the area around the laser sensor  
when cleaning the windscreen.  
Laser Sensor  
The laser sensor is behind  
the rearview mirror.  
• Do not remove the laser sensor form the unit.  
Manual transmission models  
When the vehicle comes to a stop with the system’s  
automatic braking, the engine may stop. To start the  
engine again, follow the standard procedure.  
2 Starting the Engine P. 392, 395  
The system activates when the speed difference between your vehicle and a  
vehicle detected in front of you is about 5 km/h (3 mph) to 32 km/h (20 mph)  
with a high chance of collision.  
The system don’t activate when shift position is (R.  
Continued  
457  
18 FIT JAZZ-32T5A6100.book 458 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBrakinguCity-Brake Active system  
1City-Brake Active system  
Collision Alert Stages  
■
The system may not activate or may not detect a  
vehicle in front of your vehicle under the following  
conditions:  
• A vehicle in front of you is diagonally, horizontally,  
or frontally positioned.  
• The distance between your vehicle and the vehicle  
ahead of you is too short.  
• The speed difference between your vehicle and a  
vehicle ahead of you is large.  
• A vehicle cuts in front of you, and brakes suddenly.  
• You rapidly accelerate your vehicle, getting closer  
to a vehicle ahead.  
• An oncoming vehicle suddenly drifts in front of  
you.  
The beeper sounds, and a CTBA warning  
blinks on the multi-information display, and  
hard braking is applied when a possible  
collision becomes likely unavoidable.  
This automatic braking with the system  
activated is cancelled after the vehicle comes  
to a complete stop.  
Apply the brakes accordingly.  
A symbol indicating that the system has  
activated appears on the multi-information  
display after the vehicle is stopped.  
2 Multi-Information Display Warning and  
Information Messages P. 110  
• Your vehicle suddenly drifts into the oncoming  
lane.  
• A vehicle suddenly crosses in front of you at  
intersections.  
• When driving in bad weather (heavy rain, fog,  
snow, etc.).  
The system may be cancelled if you operate  
the brake pedal, the accelerator pedal, or the  
steering wheel to avoid the collision.  
• When driving on a curved or winding road.  
• A vehicle in front of you is extremely dirty, making  
it difficult to reflect radio waves well.  
• You depress the brake pedal or turn the steering  
wheel to avoid a collision.  
• A vehicle ahead of you is a motorcycle or other  
small vehicle the sensor cannot detect properly.  
• The upper part of the windscreen around the laser  
sensor is covered with dirt, ice frost, etc.  
The system may not activate while you are fully  
depressing the accelerator pedal.  
458  
18 FIT JAZZ-32T5A6100.book 459 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBrakinguCity-Brake Active system  
1City-Brake Active system  
The System On and Off  
■
The system may automatically shut off, and the CTBA  
indicator can come on and the message can appear  
on the multi-information display when:  
You can turn the system on and off using the  
multi-information display.  
2 Customized Features P. 131  
• The temperature around the laser sensor on the  
upper part of the windscreen becomes high.  
• The area around the laser sensor, which is located  
in the upper part of the windscreen, is covered with  
obstacles, such as dirt, ice and frost.  
When the system is off, the CTBA indicator in  
the instrument panel comes on.  
• The bonnet is covered with obstacles such as snow.  
The City-Brake Active system is turned on  
every time you start the engine, even if you  
turned it off the last time you drove the  
vehicle.  
Stop your vehicle in a safe place, and  
• Use the air conditioning system to cool down the  
interior if the laser sensor temperature is high.  
• Remove any obstacles such as dirt and snow from  
the windscreen and bonnet.  
2 Indicators P. 106  
Once the conditions that caused the system to shut  
off improve, the system comes back on.  
Turn off the system when:  
• You use a dynamometer or put the wheels on a  
roller.  
• Driving off road or on a mountainous road  
obstructed with branches and leaves.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
Continued  
459  
18 FIT JAZZ-32T5A6100.book 460 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBrakinguCity-Brake Active system  
1City-Brake Active system  
With Little Chance of a Collision  
■
Take your vehicle to a dealer if you need the laser  
sensor or area around it to be repaired, or removed,  
or the area around the laser sensor is strongly  
impacted.  
The system may activate even when you are aware of a vehicle ahead of you, or  
when there is no vehicle ahead. Some examples of this are:  
■ When passing  
Your vehicle approaches another vehicle ahead of you and you change lanes to pass.  
Do not alter your vehicle’s suspension.  
Changing the vehicle height prevents the system to  
work properly.  
■ At an intersection  
Your vehicle approaches or passes another vehicle that is making a left or right turn.  
Make sure to use the same size and type of tyre for all  
four wheels. Use the tyres that are all in about the  
same condition with adequate tread. If not, the  
system may operate abnormally.  
■ Through a low bridge  
You drive under a low or narrow bridge.  
The system may not work properly if:  
• Your vehicle has heavy load in the rear.  
• Tyres are over- or underinflated.  
■ Speed bumps, road work sites, train tracks, roadside objects, etc.  
You drive over speed bumps, steel road plates, etc., or your vehicle approaches train  
tracks or roadside objects, such as a traffic sign and guard rail, on a curve.  
■ When parking  
Your vehicle approaches a stationary vehicle or wall.  
460  
18 FIT JAZZ-32T5A6100.book 461 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBrakinguCity-Brake Active system  
1About the Laser Equipped in the System  
About the Laser Equipped in the System  
■
The City-Brake Active system unit, including  
the laser sensor, is located behind the  
rearview mirror.  
3WARNING  
Handling the laser sensor improperly can  
lead to eye injury.  
Laser Sensor  
To avoid eye injury, Keep the following:  
• Do not take the sensor apart from the  
unit.  
• Never look at the sensor within a 100 mm  
distance using an optical device, such as a  
magnified glass, microscopes, and an  
object lens.  
Following lists the classified specifications of the laser used in this system according  
to the IEC requirements. The same information can be found in the IEC60825-1  
standard labels.  
Laser classification  
Max average power: 45 mW  
Pulse duration:  
Wavelength:  
33 ns  
905 nm  
Average power angle 28 × 12  
(horizontal × vertical)  
Laser Classification Label  
Laser Explanation Label  
461  
18 FIT JAZZ-32T5A6100.book 462 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuBrakinguEmergency Stop Signal  
Emergency Stop Signal  
Activates when you brake hard while driving at 60 km/h (37 mph) or above to alert  
drivers behind you about sudden braking by rapidly flashing hazard warning lights.  
This may help to alert drivers behind you to take appropriate means to avoid a  
possible collision with your vehicle.  
1Emergency Stop Signal  
The emergency stop signal is not a system that can  
prevent a possible rear-end collision caused by your  
hard braking. It flashes the hazard warning lights at  
the time you are braking hard. It is always  
recommended to avoid hard braking unless it is  
absolutely necessary.  
■ When the system activates:  
Hard Braking  
The emergency stop signal does not activate with the  
hazard warning button pressed in.  
Brake Lights Come On  
If the ABS stops working for a certain period during  
braking, the emergency stop signal may not activate  
at all.  
Hazard Warning Lights Flash  
Hazard Warning Indicators Blink  
The hazard warning lights stop flashing when:  
• You release the brake pedal.  
• The ABS is deactivated.  
• Your vehicle’s decelerating speed becomes moderate.  
• You press the hazard warning button.  
462  
18 FIT JAZZ-32T5A6100.book 463 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Parking Your Vehicle  
When Stopped  
1. Depress the brake pedal firmly.  
2. Firmly apply the parking brake.  
1Parking Your Vehicle  
Do not park your vehicle near flammable objects,  
such as dry grass, oil, or timber.  
Continuously variable transmission models  
Heat from the exhaust can cause a fire.  
3. Move the shift lever from (D to (P.  
Manual transmission models  
3. Move the shift lever to (R or (1.  
4. Turn off the engine.  
1When Stopped  
NOTICE  
Continuously variable transmission models  
The following can damage the transmission:  
• Depressing the accelerator and brake pedals  
simultaneously.  
Always set the parking brake firmly, in particular if you are parked on an incline.  
• Holding the vehicle in place when facing uphill by  
depressing the accelerator pedal.  
• Moving the shift lever into (P before the vehicle  
stops completely.  
Raise the wiper arms when snow is expected.  
In extremely cold temperatures, the parking brake  
may freeze up if applied. If such temperatures are  
expected, do not apply the parking brake but, if  
parking on a slope, either turn the front wheels so  
they will contact the curb if the vehicle rolls down the  
slope or block the wheels to keep the vehicle from  
moving. If you do not take either precaution, the  
vehicle may roll unexpectedly, leading to a crash.  
463  
18 FIT JAZZ-32T5A6100.book 464 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuParking Your VehicleuParking Sensor System  
Parking Sensor System*  
*
The corner and centre sensors monitor obstacles around your vehicle, and the  
beeper and multi-information display and audio/information screen* let you know  
the approximate distance between your vehicle and the obstacle.  
1Parking Sensor System  
Even when the system is on, always confirm if there is  
no obstacle near your vehicle before parking.  
The system may not work properly when:  
• The sensors are covered with snow, ice mud or dirt.  
• The vehicle is on uneven surface, such as grass,  
bumps, or a hill.  
■ The sensor location and range  
Front Corner  
Sensors  
Rear Corner  
Sensors  
Rear Centre Sensors  
• The vehicle has been out in hot or cold weather.  
• The system is affected by devices that emit  
ultrasonic waves.  
• Driving in bad weather.  
The system may not sense:  
• Thin or low objects.  
• Sonic-absorptive materials, such as snow, cotton,  
or sponge.  
• Objects directly under the bumper.  
Do not put any accessories on or around the sensors.  
Within about 60 cm (24 in) or less  
Within about 110 cm (43 in) or less  
* Not available on all models  
464  
18 FIT JAZZ-32T5A6100.book 465 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuParking Your VehicleuParking Sensor System  
■ Parking sensor system on and off  
With the ignition switch in ON (w*1, press the  
parking sensor system button to turn on or off  
the system. The indicator in the button comes  
on when the system is on.  
1Parking sensor system on and off  
The parking sensor system is in the previously  
selected on or off setting each time you start the  
engine.  
The front corner sensors start to detect an  
obstacle when the shift lever is in any position  
other than (P or (R, and the vehicle speed is  
less than 8 km/h (5 mph).  
The front corner, rear corner and rear centre  
sensors start to detect an obstacle when the  
shift lever is in (R, and the vehicle speed is less  
than less than 8 km/h (5 mph).  
Manual transmission models  
You also need to release the parking brake.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
Continued  
465  
18 FIT JAZZ-32T5A6100.book 466 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuParking Your VehicleuParking Sensor System  
■ When the distance between your vehicle and obstacles becomes shorter  
Models with multi-view rear camera  
Distance between the Bumper and Obstacle  
Length of the  
intermittent beep  
Indicator  
Audio/information screen  
Corner Sensors  
Centre Sensors  
About 110-60 cm  
(43-24 inches)  
Moderate  
Short  
—
Blinks in Yellow*1  
About 60-45 cm  
(24-18 inches)  
About 60-45 cm  
(24-18 inches)  
Blinks in Amber  
About 45-35 cm  
(18-14 inches)  
About 45-35 cm  
(18-14 inches)  
Very short  
Indicators light where the  
sensor detects an obstacle.  
About 35 cm  
(14 inches) or less  
About 35 cm  
(14 inches) or less  
Continuous  
Blinks in Red  
*1: At this stage, only the centre sensors detect obstacles.  
466  
18 FIT JAZZ-32T5A6100.book 467 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuParking Your VehicleuParking Sensor System  
Models without multi-view rear camera  
Distance between the Bumper and Obstacle  
Length of the  
intermittent beep  
Indicator  
Multi-information display  
Corner Sensors  
Centre Sensors  
About 110-60 cm  
(43-24 inches)  
Moderate*1  
Short  
—
—
—
About 60-45 cm  
(24-18 inches)  
About 60-45 cm  
(24-18 inches)  
About 45-35 cm  
(18-14 inches)  
About 45-35 cm  
(18-14 inches)  
Very short  
Indicators: Where the sensor  
detects an obstacle lights.  
About 35 cm  
(14 inches) or less  
About 35 cm  
(14 inches) or less  
Continuous  
—
*1: At this stage, only the centre sensors detect obstacles.  
■ Rearview screen with parking sensor  
When the distance between your vehicle and obstacle behind becomes shorter, the  
audio/information screen, and display audio screen* displays the parking sensor  
indicators.  
* Not available on all models  
Continued  
467  
18 FIT JAZZ-32T5A6100.book 468 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuParking Your VehicleuParking Sensor System  
1Turning off All Rear Sensors  
Turning off All Rear Sensors  
■
When you shift to (R, the indicator in the parking  
sensor system button blinks as a reminder that the  
rear sensors have been turned off.  
1. Make sure that the parking sensor system is not activated. Turn the ignition  
switch to LOCK (0*1.  
2. Press and hold the parking sensor system button, and turn the ignition switch to  
ON (w*1.  
3. Keep pressing the button for 10 seconds. Release the button when the indicator  
in the button flashes.  
4. Press the button again. The indicator in the button goes off.  
u The beeper sounds twice. The rear sensors are now turned off.  
To turn the rear sensors on again, follow the above procedure. The beeper sounds  
three times when the rear sensors come back on.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
468  
18 FIT JAZZ-32T5A6100.book 469 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Multi-View Rear Camera*  
About Your Multi-View Rear Camera  
The audio/information screen can display your vehicle’s rear view. The display  
1About Your Multi-View Rear Camera  
automatically changes to the rear view when the transmission is put into (R.  
The rear camera view is restricted. You cannot see  
the corner ends of the bumper or what is underneath  
the bumper. Its unique lens also makes objects  
appear closer or farther than they actually are.  
Multi-View Rear Camera Display Area  
■
Tailgate open range  
Approx. 3 m (9.8 ft.)  
Visually confirm that it is safe to drive before backing  
up. Certain conditions (such as weather, lighting, and  
high temperatures) may also restrict the rear view. Do  
not rely on the rearview display which does not give  
you all information about conditions at the back of  
your vehicle.  
Wide View Mode  
Approx. 2 m (6.6 ft.)  
Guidelines  
Approx. 1 m (3.3 ft.)  
Approx. 50 cm (1.7 ft.)  
Normal View Mode  
If the camera lens is covered with dirt or moisture,  
use a soft, moist cloth to keep the lens clean and free  
of debris.  
You can change the Fixed Guideline and Dynamic  
Guideline settings.  
Top Down View Mode  
2 Customized Features P. 313  
Fixed Guideline  
On: Guidelines appear when you put the  
transmission into (R.  
Camera  
Bumper  
Off: Guidelines do not appear.  
Dynamic Guideline  
On: Guidelines move according to the steering wheel  
direction.  
Off: Guidelines do not move.  
* Not available on all models  
Continued  
469  
18 FIT JAZZ-32T5A6100.book 470 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuMulti-View Rear Camera*uAbout Your Multi-View Rear Camera  
You can view three different camera angles on the rearview display.  
Touch the appropriate icon to switch the angle.  
: Wide view  
: Normal view  
: Top down view  
• If the last used viewing mode was Wide or Normal, the same mode is selected the  
next time you put the transmission into (R.  
• If Top down view was last used before you turned off the engine, Wide View  
mode is selected next time you set the power mode to ON and put the  
transmission into (R.  
• If Top down view was last used more than 10 seconds after you put the  
transmission out of (R, Wide View mode is selected the next time you put the  
transmission into (R.  
You can also change the rear camera setting by selecting  
(Menu) when your  
vehicle’s rear view is displayed. When you select  
following items are available in additional:  
(Menu) and select Display, the  
• Display tab: Adjusts Brightness, Contrast, and Black Level of the rear camera  
screen.  
• Colour tab: Adjusts Colour and Tint of the rear camera screen.  
470  
18 FIT JAZZ-32T5A6100.book 471 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Refueling  
Fuel Information  
■ Fuel recommendation  
1Fuel Information  
Unleaded premium petrol/gasohol up to E10 (90% petrol and 10%  
ethanol), research octane number 95 or higher  
NOTICE  
Use of petrol that contains lead presents the  
following risks:  
• Damage to the exhaust system including the  
catalytic converter  
• Damage to the engine and fuel system  
• Detrimental effects on the engine and other  
systems  
Your vehicle is designed to operate on premium unleaded petrol with a research  
octane of 95 or higher. If this octane grade is unavailable, regular unleaded petrol  
with a research octane of 91 or higher may be used temporarily.  
The use of regular unleaded petrol can cause metallic knocking noises in the engine  
and will result in decreased engine performance. The long-term use of regular-grade  
petrol can lead to engine damage.  
■ Fuel tank capacity: 40 litres (8.8 Imp gal)  
MINIMUM  
Oxygenated Fuels  
Oxygenated fuels are blended with petrol and  
ethanol or other compounds. Your vehicle is also  
designed to operate on oxygenated fuels containing  
up to 10% ethanol by volume and up to 22% ETBE  
by volume, based on the EN 228 standards. For more  
information, ask your dealer.  
471  
18 FIT JAZZ-32T5A6100.book 472 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuRefuelinguHow to Refuel  
How to Refuel  
1. Stop your vehicle with the service station  
pump on the left side of the vehicle in the  
rear.  
1How to Refuel  
Fuel Fill Door  
Release Handle  
3
WARNING  
2. Turn off the engine.  
3. Pull on the fuel fill door release handle  
under the dashboard at the driver’s side.  
u The fuel fill door opens.  
Petrol is highly flammable and explosive.  
You can be burned or seriously injured  
when handling fuel.  
Pull  
• Stop the engine, and keep heat, sparks,  
and flame away.  
4. Remove the fuel fill cap slowly. If you hear a  
release of air, wait until this stops, then turn  
the knob slowly to open the fuel fill cap.  
• Handle fuel only outdoors.  
• Wipe up spills immediately.  
Do not continue to add fuel after the filler nozzle has  
automatically stopped. Additional fuel can exceed  
the full tank capacity.  
The filler nozzle automatically stops to leave space in  
the fuel tank so that fuel does not overflow as a result  
of changes in air temperature.  
Cap  
5. Place the fuel fill cap in the holder.  
6. Insert the fuel filler nozzle fully.  
u When the tank is full, the filler nozzle will  
click off automatically. This leaves space  
in the fuel tank in case the fuel expands  
with a change in the temperature.  
7. After filling, replace the fuel fill cap,  
tightening it until you hear it click at least  
once.  
Cap  
Holder  
u Shut the fuel fill door by hand.  
472  
18 FIT JAZZ-32T5A6100.book 473 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Fuel Economy and CO2 Emissions  
Improving Fuel Economy and Reducing CO2 Emissions  
Achieving fuel economy and reducing CO2 emissions is dependent on several  
factors, including driving conditions, load weight, idling time, driving habits, and  
vehicle condition. Depending on these and other factors, you may not achieve the  
rated fuel economy of this vehicle.  
1Improving Fuel Economy and Reducing CO2 Emissions  
Direct calculation is the recommended method to  
determine actual fuel consumed while driving.  
Kilometres  
driven  
Litres of  
fuel  
L per 100 km  
100  
Maintenance and Fuel Economy  
■
Miles  
Miles per  
Gallon  
Gallons of  
fuel  
driven  
You can optimize your fuel economy with proper maintenance of your vehicle.  
Follow the maintenance schedule and, if necessary, consult your warranty booklet.  
On vehicles without service reminder system, follow the Maintenance schedule.  
*
2 Maintenance Schedule P. 484  
• Use engine oil with the viscosity recommended by the ACEA or API Certification  
Seal.  
• Maintain the specified tyre pressure.  
• Do not load the vehicle with excess luggage.  
• Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside  
adds weight and increases wind resistance.  
* Not available on all models  
473  
18 FIT JAZZ-32T5A6100.book 474 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
474  

Related Topics

Before Driving Towing a Trailer When Driving Braking Parking Your Vehicle Multi-View Rear Camera* Refueling Fuel Economy and CO2 Emissions

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot