2016-2020 Honda Jazz 4 Door Instrument Panel User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instrument Panel for Your Honda Jazz 4 Door Third Generation (2016-2020)

18 FIT JAZZ-32T5A6100.book 85 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Instrument Panel  
This chapter describes the buttons, indicators, and gauges that are used while driving.  
Indicators ............................................ 86  
Multi-Information Display Warning and  
Information Messages.................... 108  
Gauges and Multi-Information Display  
Gauges............................................ 123  
Multi-Information Display ................ 124  
85  
18 FIT JAZZ-32T5A6100.book 86 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Indicators  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off if the parking brake has  
been released.  
Comes on when the parking brake is  
applied, and goes off when it is  
released.  
The beeper sounds and the indicator  
comes on if you drive with the parking  
brake not fully released.  
Comes on while driving - Make sure  
the parking brake is released. Check  
the brake fluid level.  
2 What to do when the indicator  
comes on while driving P. 569  
Comes on along with the ABS  
indicator - Have your vehicle checked  
by a dealer.  
●
●
●
Parking Brake and  
Brake System  
2 If the Brake System Indicator  
(Red) Comes On P. 569  
Indicator (Red)  
●
●
Comes on when the brake fluid level is  
low.  
Comes on if there is a problem with the  
brake system.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
86  
18 FIT JAZZ-32T5A6100.book 87 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Comes on if there is a problem with a  
system related to braking other than  
the conventional brake system.  
Stays on constantly - Have your  
vehicle checked by a dealer.  
●
Brake System  
Indicator (Amber)  
●
●
Comes on if there is a problem with the  
City-Brake Active system.  
Comes on along with the CTBA  
indicator - The City-Brake Active  
system does not activate. Have your  
vehicle checked by a dealer.  
2 City-Brake Active system P. 457  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
Continued  
87  
18 FIT JAZZ-32T5A6100.book 88 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on when you turn the ignition  
switch to ON (w*1, and goes off when  
the engine starts.  
Comes on when the engine oil pressure  
is low.  
Comes on while driving -  
Immediately stop in a safe place.  
2 If the Low Oil Pressure Indicator  
Comes On P. 568  
Low Oil Pressure  
Indicator  
●
●
●
●
Comes on when you turn the ignition  
switch to ON (w*1, and goes off when  
the engine starts.  
Comes on if there is a problem with the  
emissions control system.  
Comes on while driving - Have your  
vehicle checked by a dealer.  
Blinks while driving - Stop in a safe  
place where there are no flammable  
objects. Stop the engine for 10  
minutes or more, and wait for it to  
cool down. Then, take your vehicle to  
a dealer.  
●
●
Blinks when a misfire in the engine's  
cylinders is detected.  
Malfunction  
Indicator Lamp  
2 If the Malfunction Indicator Lamp  
Comes On or Blinks P. 569  
●
Shows the self-testing condition of the  
diagnostics of the emission control  
system.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
88  
18 FIT JAZZ-32T5A6100.book 89 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on when you turn the ignition  
switch to ON (w*1, and goes off when  
the engine starts.  
Comes on when the battery is not  
charging.  
Comes on while driving - Turn off  
the heating and cooling system*/  
climate control system* and rear  
demister in order to reduce electricity  
consumption.  
Charging System  
Indicator  
●
2 If the Charging System Indicator  
Comes On P. 568  
●
Indicates the current shift lever  
position.  
Shift Lever Position  
Indicator*  
2 Shifting P. 402  
—
●
●
Blinks if the transmission system has a  
problem.  
Blinks while driving - Avoid sudden  
starts and acceleration and have your  
vehicle checked by a dealer  
immediately.  
Transmission  
Indicator*  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
* Not available on all models  
Continued  
89  
18 FIT JAZZ-32T5A6100.book 90 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
Comes on when 7-speed manual shift  
mode is applied.  
M (7-speed manual  
shift mode)  
Indicator/Shift  
Indicator*  
2 7-Speed Manual Shift Mode  
P. 404  
—
●
●
●
●
Comes on if you are not wearing a seat  
belt when you turn the ignition switch  
to ON (w*1.  
If the front passenger is not wearing a  
seat belt, the indicator comes on about  
a few seconds later.  
Blinks while driving if either you or the  
front passenger has not fastened a seat  
belt. The beeper sounds and the  
indicator blinks at regular intervals.  
The beeper stops and the indicator  
goes off when you and the front  
passenger fasten their seat belts.  
Stays on after you or the front  
passenger has fastened the seat  
belt - A detection error may have  
occurred in the sensor. Have your  
vehicle checked by a dealer.  
●
Seat Belt Reminder  
Indicator  
2 Seat Belt Reminder P. 39  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
* Not available on all models  
90  
18 FIT JAZZ-32T5A6100.book 91 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on when the fuel reserve is  
running low (approximately 5.3 Litres/  
1.17 Imp gal left).  
Blinks if there is a problem with the fuel  
gauge.  
Comes on - Refuel your vehicle as  
soon as possible.  
●
Low Fuel Indicator  
●
Blinks - Have your vehicle checked by  
a dealer.  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
If it comes on at any other time, there is  
a problem with the ABS.  
Stays on constantly - Have your  
vehicle checked by a dealer. With this  
indicator on, your vehicle still has  
normal braking ability but no anti-lock  
function.  
Anti-lock Brake  
System (ABS)  
Indicator  
●
2 Anti-lock Brake System (ABS)  
P. 455  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Comes on if a problem with any of the  
following is detected:  
Stays on constantly or does not  
come on at all - Have your vehicle  
checked by a dealer.  
Supplemental  
Restraint System  
Indicator  
●
- Supplemental restraint system  
- Side airbag system  
- Side curtain airbag system  
- Seat belt tensioner  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
Continued  
91  
18 FIT JAZZ-32T5A6100.book 92 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
Both indicators come on for a few  
seconds when you turn the ignition  
switch to ON (w*1, then goes off after  
a system check up.  
When the passenger front airbag is  
active: The on indicator comes back on  
and remains on for about 60 seconds.  
When the passenger front airbag is  
inactive: The off indicator comes back  
on and stays on. This is a reminder that  
the passenger front airbag is  
Passenger Front  
Airbag On/Off  
Indicators  
2 Passenger Front Airbag Off  
System P. 54  
—
deactivated.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
92  
18 FIT JAZZ-32T5A6100.book 93 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Blinks when VSA is active.  
Comes on if there is a problem with the  
VSA or hill start assist system.  
Stays on constantly - Have your  
vehicle checked by a dealer.  
2 Vehicle Stability Assist (VSA)  
System P. 446  
●
●
Vehicle Stability  
Assist (VSA) System  
Indicator  
2 Hill start assist system P. 394, 398  
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Vehicle Stability  
Assist (VSA) OFF  
Indicator  
2 VSA On and Off P. 447  
—
●
Comes on when you deactivate VSA.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
Continued  
93  
18 FIT JAZZ-32T5A6100.book 94 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Blinks when the engine coolant  
temperature goes up, and stays on if  
the temperature continues to rise.  
Goes off, then comes on blue when  
the engine coolant temperature is low.  
—
Blinks while driving - Drive slowly to  
prevent overheating.  
●
High Temperature  
Indicator (Red)  
(White)  
●
Stays on while driving -  
Immediately stop in a safe place and  
allow the engine to cool.  
2 Overheating P. 566  
(Amber)  
●
●
Comes on when the engine coolant  
temperature is low.  
If the indicator stays on after the  
engine has reached normal operating  
temperature, there may be a problem  
with the temperature sensors. Have  
your vehicle inspected by a dealer.  
Low Temperature  
Indicator (Blue)  
—
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
94  
18 FIT JAZZ-32T5A6100.book 95 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Goes off when all doors and the  
tailgate are closed.  
●
●
Door and Tailgate  
Open Indicator  
Comes on if any door or the tailgate is  
not completely closed.  
The beeper sounds and the indicator  
comes on if any door or the tailgate is  
opened while driving.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
Continued  
95  
18 FIT JAZZ-32T5A6100.book 96 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
May come on briefly if the ignition  
switch is turned to ON (w*1 and the  
vehicle is not moved within 45 seconds,  
to indicate the calibration process is not  
yet complete.  
Comes on while driving - Stop in a  
safe place, check tyre pressures, and  
inflate the tyre(s) if necessary.  
Stays on after the tyres are inflated  
to the recommended pressures -  
The system needs to be calibrated.  
2 Deflation Warning System  
●
●
Calibration P. 449  
Low Tyre Pressure/  
Deflation Warning  
System Indicator  
●
Comes on and stays on when:  
- One or more tyres’ pressures are  
determined to be significantly low.  
- The system has not been calibrated.  
●
●
Blinks for about one minute, and then  
stays on if there is a problem with the  
deflation warning system, or when a  
compact spare tyre* is temporarily  
installed.  
Blinks and remains on - Have your  
vehicle checked by a dealer. If the  
vehicle is fitted with a compact spare,  
get your regular tyre repaired or  
replaced and put back on your vehicle  
as soon as you can.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
* Not available on all models  
96  
18 FIT JAZZ-32T5A6100.book 97 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on when you turn the ignition  
switch to ON (w*1, and goes off when  
the engine starts.  
Comes on if there is a problem with the  
EPS system.  
Stays on constantly or does not  
come on at all - Have your vehicle  
checked by a dealer.  
Electric Power  
Steering (EPS)  
System Indicator  
●
2 If the Electric Power Steering  
(EPS) System Indicator Comes On  
P. 570  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
While the indicator is on, press the  
(information) button to see  
the message again.  
●
●
Comes on along with a beep when a  
problem is detected. A system message  
on the multi-information display  
appears at the same time.  
Refer to the Indicators information in  
this chapter when a system message  
appears on the multi-information  
display. Take appropriate action for  
the message.  
System Message  
Indicator  
—
●
The multi-information display does not  
return to the normal screen unless the  
warning is cancelled, or the button is  
pressed.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
Continued  
97  
18 FIT JAZZ-32T5A6100.book 98 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
●
●
Blinks when you operate the turn signal  
lever.  
Does not blink or blinks rapidly - A  
turn signal light bulb has blown.  
Change the bulb immediately.  
Turn Signal and  
Hazard Warning  
Indicators  
Blink along with all turn signals if you  
press the hazard warning button.  
Blinks along with all turn signals when  
you depress the brake pedal during  
high speed driving.  
2 Replacing Light Bulbs P. 503, 505  
2 Emergency Stop Signal P. 462  
—
●
Comes on when the high beam  
headlights are on.  
High Beam Indicator  
Lights On Indicator  
—
—
—
●
●
Comes on whenever the light switch is  
on, or in AUTO when the exterior lights  
are on.  
If you remove the key from the ignition  
switch*, or set the power mode* to  
VEHICLE OFF (LOCK) while the exterior  
lights are on, a chime sounds when the  
driver's door is opened.  
●
Comes on when the front fog lights are  
on.  
Front Fog Light  
Indicator*  
—
—
—
—
●
Comes on when the rear fog light is on.  
Rear Fog Light  
Indicator  
* Not available on all models  
98  
18 FIT JAZZ-32T5A6100.book 99 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on briefly when you turn the  
ignition switch to ON (w*1, then goes  
off.  
Comes on if the immobilizer system  
cannot recognize the key information.  
Blinks -  
Models without keyless access system  
You cannot start the engine. Turn the  
ignition switch to LOCK (0, pull the  
key out, and then insert the key and  
turn it to ON (w again.  
●
Models with keyless access system  
You cannot start the engine. Set the  
power mode to VEHICLE OFF (LOCK),  
then select the ON mode again.  
Repeatedly blinks - The system may  
be malfunctioning. Have your vehicle  
checked by a dealer.  
Do not try to alter this system or add  
other devices to it. Electrical problems  
can occur.  
Immobilizer System  
Indicator  
—
●
●
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
Continued  
99  
18 FIT JAZZ-32T5A6100.book 100 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
*1  
Blinks when the security system alarm  
has been set.  
Indicator Security System  
2 Security System Alarm* P. 159  
—
Alarm Indicator*  
*2  
Indicator  
●
●
Comes on for a few seconds when you  
set the power mode to ON, then goes  
off.  
Comes on as soon as a problem is  
detected in the keyless access system or  
keyless starting system.  
Stays on constantly or does not  
come on at all - Have your vehicle  
checked by a dealer.  
Keyless Access  
System Indicator*  
●
*1: Left-hand drive type  
*2: Right-hand drive type  
* Not available on all models  
100  
18 FIT JAZZ-32T5A6100.book 101 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
Comes on briefly when you turn the  
ignition switch to ON (w*1, then goes  
off.  
2 Shift Up Indicator  
P. 406  
2 Shift Up/Down Indicators  
P. 408  
*3  
*2  
Shift Up Indicator  
—
●
●
Comes on when shifting up is  
recommended.  
Comes on briefly when you turn the  
ignition switch to ON (w*1, then goes  
off.  
Comes on when shifting down is  
recommended.  
*3  
2 Shift Up/Down Indicators  
P. 408  
Shift Down Indicator  
—
●
●
Comes on when the cruise control is  
ready to use.  
Cruise Main  
Indicator  
2 Cruise Control P. 420  
—
—
●
Comes on when the adjustable speed  
limiter is ready to use.  
Adjustable Speed  
Limiter Indicator  
2 Adjustable Speed Limiter P. 423  
●
Cruise Control and  
Adjustable Speed  
Limiter Set Speed  
Indicator  
Comes on when you have set a speed  
for cruise control or for adjustable  
speed limiter.  
2 Cruise Control P. 420  
2 Adjustable Speed Limiter P. 423  
—
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
*2: Continuously variable transmission models  
*3: Manual transmission models  
Continued  
101  
18 FIT JAZZ-32T5A6100.book 102 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Comes on when all the operating  
conditions of the high beam support  
system are met.  
High Beam Support  
System Indicator*  
2 Auto High-Beam (High Beam  
Support System)* P. 175  
—
●
●
Comes on when Auto Idle Stop is in  
operation. The engine automatically  
shuts off.  
2 Auto Idle Stop P. 410, 415  
Models with climate control system  
Manual transmission models  
●
●
Blinks when the ambient conditions  
may cause the windows to fog up.  
Blinks when the ambient conditions  
may become different from the climate  
control settings you have selected.  
(windscreen demister) is touched.  
Depress the clutch pedal. The engine  
automatically restarts.  
Auto Idle Stop  
Indicator (Green)  
●
2 Auto Idle Stop P. 415  
●
(White)  
Models with heating and cooling system  
●
Blinks when the fan is turned on and  
the mode control dial is turned to  
.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
* Not available on all models  
102  
18 FIT JAZZ-32T5A6100.book 103 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Blinks - Have your vehicle checked by  
a dealer.  
Auto Idle Stop  
System Indicator  
(Amber)  
●
●
Blinks if there is a problem with the  
Auto Idle Stop system.  
Comes on when the Auto Idle Stop  
system has been turned off by the Auto  
Idle Stop system OFF button.  
2 Auto Idle Stop System ON/OFF  
P. 411, 416  
—
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
Continued  
103  
18 FIT JAZZ-32T5A6100.book 104 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Comes on when you have customized  
forward collision warning system to  
turn off.  
Stays on constantly without the  
system off - Have your vehicle  
checked by a dealer.  
(White)  
(Amber)  
Comes on if there is a problem with the  
system.  
●
●
Comes on when the system shuts itself  
off.  
Stays on - The temperature inside the  
camera is too high. The system  
activates when the temperature inside  
the system cools down.  
Forward Collision  
Warning Indicator*  
2 Automatic shutoff P. 436  
●
Stays on - The area around the  
camera is blocked by dirt, mud, etc.  
Stop your vehicle in a safe place, and  
wipe it off with a soft cloth.  
●
Have your vehicle checked by a dealer  
if the indicator and message come  
back on after you cleaned the area  
around the camera.  
2 Automatic shutoff P. 436  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
* Not available on all models  
104  
18 FIT JAZZ-32T5A6100.book 105 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
Comes on if there is a problem with the  
lane departure warning system.  
Stays on constantly - Have your  
vehicle checked by a dealer.  
●
●
●
Comes on when the system shuts itself  
off.  
Stays on - The temperature inside the  
camera is too high.  
Use the heating and cooling system*/  
climate control system* to cool down  
the camera.  
The system activates when the  
temperature inside the camera cools  
down.  
Lane Departure  
Warning Indicator*  
2 Lane Departure Warning Camera  
P. 439  
●
Stays on - The area around the  
camera is blocked by dirt, mud, etc.  
Stop your vehicle in a safe place, and  
wipe it off with a soft cloth.  
Have your vehicle checked by a dealer  
if the indicator and message come  
back on after you cleaned the area  
around the camera.  
●
2 Lane Departure Warning Camera  
P. 439  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
* Not available on all models  
Continued  
105  
18 FIT JAZZ-32T5A6100.book 106 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
●
Comes on for a few seconds when you  
turn the ignition switch to ON (w*1,  
then goes off.  
—
—
●
●
Goes off when you have customized  
the City-Brake Active system to turn on.  
Comes on when you have customized  
the City-Brake Active system to turn  
off.  
2 City-Brake Active system P. 457  
2 Customized Features P. 131  
—
City-Brake Active  
System (CTBA)  
Indicator  
●
●
●
Comes on when the area around the  
laser sensor, which is located in the  
upper part of the windscreen, is  
covered with obstacles, such as dirt, ice  
and frost.  
Remove the dirt or any obstacles using  
the washer and wipers.  
Stop your vehicle in a safe place and  
wipe away dirt or any obstacles  
covering the area around the laser  
sensor on the windscreen.  
2 City-Brake Active system P. 457  
The system resumes when obstacles  
are removed.  
●
May come on when driving in bad  
weather (rain, fog, snow).  
●
●
●
Comes on when snow is accumulated  
on the bonnet.  
Stop your vehicle in a safe place and  
remove snow from the bonnet.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
106  
18 FIT JAZZ-32T5A6100.book 107 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsu  
Indicator  
Name  
On/Blinking  
Explanation  
Message  
May come on when the temperatures  
of the area around the laser sensor are  
high.  
Use the heating and cooling system*/  
climate control system* to cool down  
the area around the laser sensor.  
The system resumes when the  
temperatures of the area around the  
laser sensor go down.  
●
●
●
City-Brake Active  
System (CTBA)  
Indicator  
●
●
Comes on along with the brake system  
indicator (amber) if there is a problem  
with the system.  
The system does not activate. Have  
your vehicle checked by a dealer.  
* Not available on all models  
107  
18 FIT JAZZ-32T5A6100.book 108 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Multi-Information Display Warning and Information Messages  
The following messages appear only on the multi-information display. Press the  
with the system message indicator on.  
(information) button to see the message again  
Message  
Condition  
Explanation  
Continuously variable transmission models  
●
Appears while you are customizing the settings and the  
shift lever is moved out of (P.  
2 Customized Features P. 131  
Manual transmission models  
●
Appears while you are customizing the settings and the  
parking brake is released.  
●
●
●
●
Appears once if the outside temperature is below 3°C  
There is a possibility that the road surface is icy and  
slippery.  
while the ignition switch is in ON (w*1.  
Appears when any of the rear seat belts are latched or  
unlatched, or either rear door is opened and closed.  
2 Seat Belt Reminder P. 39  
Appears when the vehicle speed reaches the set speed.  
You can set two different speeds for the alarm.  
2 Speed Alarm Setting P. 129  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
108  
18 FIT JAZZ-32T5A6100.book 109 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Message  
Condition  
Explanation  
●
●
●
●
Appears when the engine oil level is low while the  
engine is running.  
Appears while driving - Immediately stop in a safe  
place.  
2 If the Low Oil Level Symbol Appears P. 572  
●
Appears when the engine is running, there is a system  
problem in the engine oil level sensor.  
Have your vehicle checked by a dealer.  
●
●
Appears if there is a problem with the automatic  
lighting control system.  
Appears while driving - Manually turn the lights on,  
and have your vehicle checked by a dealer.  
Models with LED headlights  
Have your vehicle checked by a dealer.  
●
Appears if there is a problem with the headlights with  
LED.  
Continued  
109  
18 FIT JAZZ-32T5A6100.book 110 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Message  
Condition  
Explanation  
●
●
Flashes when the City-Brake Active system senses a  
likely collision with a vehicle in front of you. The beeper  
sounds.  
Depress the brake pedal, and keep an appropriate  
distance from the vehicle ahead. The alert will  
disappear.  
The system automatically applies the brake if a possible  
collision becomes likely unavoidable.  
2 City-Brake Active system P. 457  
●
●
Changes the display when your vehicle is stopped by the  
City-Brake Active system. The beeper stops.  
110  
18 FIT JAZZ-32T5A6100.book 111 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Message  
Condition  
Explanation  
●
●
Appears when Auto Idle Stop does not activate for  
some reason.  
Appears when the engine restarts automatically.  
2 Auto Idle Stop Activates When: P. 412, 417  
●
Appears when Auto Idle Stop does not activate because  
the engine coolant temperature is low or high.  
2 Auto Idle Stop does not activate when: P. 412, 417  
●
Appears when Auto Idle Stop does not activate because  
the climate control system is in use, and the difference  
between the set temperature and actual interior  
temperature becomes significant.  
2 Auto Idle Stop P. 410, 415  
●
Continuously variable transmission models  
Models with climate control system  
The engine restarts automatically in a few seconds.  
●
Appears when Auto Idle Stop does not activate because  
the climate control system is in use, and the difference  
between the set temperature and actual interior  
temperature becomes significant.  
Continued  
111  
18 FIT JAZZ-32T5A6100.book 112 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Message  
Condition  
Explanation  
●
Appears when Auto Idle Stop does not activate because  
the battery charge level is low.  
2 Auto Idle Stop P. 410, 415  
●
●
Appears when the battery is low performance.  
●
Appears when the system is under the following  
conditions while Auto Idle Stop activates:  
- The battery charge level is low.  
The engine restarts automatically in a few seconds.  
●
●
Appears when the bonnet is opened.  
Close the bonnet.  
●
●
●
●
Appears when there is a problem with the sensor on the  
battery.  
Appears when the battery is not charging.  
Have your vehicle checked by a dealer.  
2 Checking the Battery P. 522  
Appears along with the battery charging system  
indicator - Turn off the climate control system and rear  
defogger to reduce electricity consumption.  
2 If the Charging System Indicator Comes On P. 568  
112  
18 FIT JAZZ-32T5A6100.book 113 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Continuously variable transmission models  
Message  
Condition  
Explanation  
●
●
Appears if you press the ENGINE START/STOP button  
to turn the engine off without the shift lever in (P.  
Press the ENGINE START/STOP button twice with your  
foot off the brake pedal, after moving the shift lever to  
(P.  
●
●
●
●
Appears when the engine stops without the shift lever  
in (P, and does not restart automatically.  
Appears if you open the bonnet with Auto Idle Stop  
activated.  
If you want to turn the ignition switch to ON (w*1, move  
the shift lever to (P.  
If you want to start the engine, follow the normal  
procedure.  
2 Starting the Engine P. 392, 395  
●
●
Appears when Auto Idle Stop does not activate because  
the pressure to the brake pedal is not enough.  
Depress the brake pedal firmly.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
Continued  
113  
18 FIT JAZZ-32T5A6100.book 114 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Manual transmission models  
Message  
Condition  
Explanation  
●
●
Appears when the shift lever is in any position except  
Shift to (N.  
2 Auto Idle Stop Activates When: P. 417  
(N.  
●
●
●
Appears in white when you turn the ignition switch to  
Depress the clutch pedal.  
START (e*1 before fully depressing the clutch pedal.  
Models with climate control system  
Depress the clutch pedal. The engine automatically  
restarts.  
●
Blinks when the ambient conditions may cause the  
windows to fog up.  
Blinks when the ambient conditions may become  
different from the climate control settings you have  
selected.  
2 Auto Idle Stop P. 415  
●
●
(windscreen demister) is touched.  
Models with heating and cooling system  
●
Blinks when the fan is turned on and the mode control  
dial is turned to  
.
●
●
Appears in amber when the following conditions are  
kept while Auto Idle Stop is in operation:  
- You are not wearing a seat belt.  
Depress the clutch pedal. Wear the seat belt  
immediately, and continue to keep the shift lever in (N  
next time Auto Idle Stop activates.  
- The shift lever is in any position except (N.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
114  
18 FIT JAZZ-32T5A6100.book 115 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Models with high beam support system  
Message  
Condition  
Explanation  
●
●
●
Appears when there is a problem with the high beam  
support system.  
Appears when the high beam support system camera  
lens gets dirty.  
Manually operate the headlight switch.  
If you are driving with the high beam headlights when  
this happens, the headlights are changed to low beams.  
Stop in a safe place and clean the camera lens with a  
soft cloth.  
If the message does not disappear after cleaning the  
lens, have your vehicle checked by a dealer.  
●
●
●
Continued  
115  
18 FIT JAZZ-32T5A6100.book 116 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Message  
Condition  
Explanation  
●
●
●
●
●
●
Appears when any of the service items is required in less  
than 30 days. The remaining days are estimated based  
on your driving conditions.  
The remaining days will be counted down per day.  
2 Service Reminder System P. 479  
Appears when any of the service items is required in less  
than 10 days. The remaining days are estimated based  
on your driving conditions.  
Have the indicated service performed as soon as  
possible.  
2 Service Reminder System P. 479  
Appears when the indicated maintenance service is still  
not done after the remaining days reach 0.  
Your vehicle has passed the service required point.  
Immediately have the service performed and make sure  
to reset the service reminder.  
2 Service Reminder System P. 479  
116  
18 FIT JAZZ-32T5A6100.book 117 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Models without keyless access system  
Message  
Condition  
Explanation  
●
Appears when the ignition key is turned to ACCESSORY  
(q from ON (w. (The driver’s door is closed.)  
—
●
●
Appears when you open the driver’s door while the  
Turn the ignition switch to LOCK (0, then remove the  
ignition key is in ACCESSORY (q.  
key.  
●
●
Appears when you open the driver’s door while the  
Remove the key from the ignition switch.  
ignition key is in LOCK (0.  
●
●
●
●
Appears in white when you turn the ignition switch to  
START (e before fully depressing the clutch pedal.  
Turn the ignition switch after fully depressing the clutch  
pedal.  
*1  
Appears in amber when the engine does not restart  
automatically due to the following reasons:  
- The bonnet is open.  
Follow the normal procedure to start the engine.  
2 Starting the Engine P. 392  
*2  
- There is a problem in the system that disables Auto Idle  
Stop.  
*1: Manual transmission models  
*2: Continuously variable transmission models  
Continued  
117  
18 FIT JAZZ-32T5A6100.book 118 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Models with keyless access system  
Message  
Condition  
Explanation  
●
●
Appears in white after you unlock and open the driver’s  
door.  
Appears in white when you set the power mode to  
ACCESSORY or ON.  
*1  
2 Starting the Engine P. 395  
●
●
Appears in amber when the engine does not restart  
automatically due to the following reasons:  
- The bonnet is open.  
Follow the normal procedure to start the engine.  
*2  
2 Starting the Engine P. 395  
- There is a problem in the system that disables Auto Idle  
Stop.  
●
Appears when the power mode is in ACCESSORY.  
—
(White)  
●
●
Appears after the driver’s door is opened when the  
power mode is in ACCESSORY.  
Press the ENGINE START/STOP button twice with your  
foot off the brake pedal*1 or the clutch pedal*2 to  
change the power mode to VEHICLE OFF (LOCK).  
(Amber)  
*1: Continuously variable transmission models  
*2: Manual transmission models  
118  
18 FIT JAZZ-32T5A6100.book 119 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Message  
Condition  
Explanation  
●
●
●
●
Appears when you close the door with the power mode  
in ON without the keyless remote inside the vehicle.  
Goes off when you bring the keyless remote back inside  
the vehicle and close the door.  
2 Keyless Remote Reminder P. 167  
●
Appears when the keyless remote battery becomes  
weak.  
Replace the battery as soon as possible.  
2 Replacing the Button Battery P. 527  
Appears if the keyless remote battery is too weak to  
start the engine or the key is not within operating range  
to start the engine. A beeper sounds six times.  
2 If the Keyless Remote Battery is Weak P. 560  
Continued  
119  
18 FIT JAZZ-32T5A6100.book 120 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Message  
Condition  
Explanation  
●
●
●
●
Appears if the starting system has a problem.  
As a temporary measure, press and hold the ENGINE  
START/STOP button for 15 seconds while pressing the  
brake pedal and clutch pedal (manual transmission  
only), and manually start the engine. Have your vehicle  
checked by a dealer.  
Continuously variable transmission models  
Press the ENGINE START/STOP button twice after  
moving the shift lever to (P.  
●
Appears if you press the ENGINE START/STOP button  
to turn the engine off without the shift lever in (P.  
●
Appears when the steering wheel is locked.  
Move the steering wheel left and right while pressing  
the ENGINE START/STOP button.  
120  
18 FIT JAZZ-32T5A6100.book 121 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Models with forward collision warning  
Message  
Condition  
Explanation  
●
●
Flashes when the system senses a likely collision with a  
vehicle in front of you. The beeper sounds.  
Take the appropriate means to prevent a collision (apply  
the brakes, change lanes, etc.)  
2 Forward Collision Warning* P. 434  
Models with lane departure warning  
Message  
Condition  
Explanation  
●
●
Appears when your vehicle is too close to the traffic lane  
lines. The beeper sounds.  
Take appropriate action to keep your vehicle within the  
lane lines.  
2 Lane Departure Warning* P. 438  
* Not available on all models  
Continued  
121  
18 FIT JAZZ-32T5A6100.book 122 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicatorsuMulti-Information Display Warning and Information Messages  
Models with parking sensor system  
Message  
Condition  
Explanation  
●
●
Appears if there is a problem with the parking sensor  
system.  
Check if the area around the sensor(s) is covered with  
mud, ice, snow, etc. If the indicator(s) stays on even  
after you clean the area, have the system checked by a  
dealer.  
●
If there is a problem with any of the sensors, the  
appropriate sensor indicator(s) comes on.  
122  
18 FIT JAZZ-32T5A6100.book 123 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Gauges and Multi-Information Display  
Gauges  
Gauges include the speedometer, tachometer, and related indicators. They are  
displayed when the ignition switch is in ON (w*1.  
Speedometer  
■
Right-hand drive type  
Displays your driving speed in km/h and mph.  
Left-hand drive type  
Displays your driving speed in km/h.  
Tachometer  
■
Shows the number of engine revolutions per minute.  
Ambient Meter  
■
Changes colour to reflect your driving style.  
Green: Fuel efficient driving  
Blue green: Moderate acceleration/deceleration  
Blue: Aggressive acceleration/deceleration  
The ambient meter colour changes in accordance with your brake or accelerator  
pedal operation.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
123  
18 FIT JAZZ-32T5A6100.book 124 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
Multi-Information Display  
The multi-information display shows the odometer, trip meter, outside temperature,  
fuel gauge, and other gauges.  
1Switching the Display  
Right-hand drive type  
It also displays important messages such as warnings and other helpful information.  
Switch between km/h and mph by using the  
customized features on the multi-information  
display.  
Switching the Display  
■
2 Customized Features P. 131  
■ Main displays  
Press the  
(information) button to change the display.  
Instant Fuel  
Economy  
Average Fuel  
Economy  
Range  
Elapsed Time  
Average Speed  
Traffic Sign  
Recognition  
System*  
Button  
Customizable  
Setting Entry  
Service Reminder  
System  
Rear Seat Belt  
Use Monitor  
Blank Screen  
Speed Alarm  
* Not available on all models  
124  
18 FIT JAZZ-32T5A6100.book 125 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
■ Lower displays  
Press the SEL/RESET button to change the display.  
1Switching the Display  
2 Adjusting the Clock P. 140  
Models with display audio system  
Odometer  
Trip A  
Trip B  
Some of the items on the information display also  
appear on the audio/information screen. They also  
change along with the information display changes  
while the fuel consumption is shown.  
Outside  
Temperature  
Outside  
Temperature  
Outside  
Temperature  
Fuel Gauge  
Fuel Gauge  
Fuel Gauge  
SEL/RESET  
Button  
Continued  
125  
18 FIT JAZZ-32T5A6100.book 126 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
Odometer  
Shows the total number of kilometres or miles* that your vehicle has accumulated.  
■
1Trip Meter  
Trip Meter  
Shows the total number of kilometres or miles* driven since the last reset. Trip A and  
B can be used to measure two separate trips.  
■
Switch between trip A and B by pressing the SEL/  
RESET button.  
■ Resetting a trip meter  
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip  
meter is reset to 0.0.  
1Average Fuel Economy  
Average Fuel Economy  
■
You can change when to reset the average fuel  
economy.  
2 Customized Features P. 131  
Shows the estimated average fuel economy of each trip meter in l/100 km or mpg*.  
The display is updated at set intervals. When a trip meter is reset, the average fuel  
economy is also reset.  
Range  
■
Shows the estimated distance you can travel on the remaining fuel. This distance is  
estimated from the fuel economy of your previous trips.  
1Elapsed Time  
Elapsed Time  
■
You can change when to reset the elapsed time.  
2 Customized Features P. 131  
Shows the time elapsed since the last time trip A or trip B was reset.  
* Not available on all models  
126  
18 FIT JAZZ-32T5A6100.book 127 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
1Average Speed  
Average Speed  
Shows the average speed in km/h or mph* since the last time trip A or trip B was  
reset.  
■
You can change when to reset the average speed.  
2 Customized Features P. 131  
Instant Fuel Economy  
Shows the instant fuel economy as a bar graph in l/100 km or mpg*.  
■
1Outside Temperature  
Outside Temperature  
■
The temperature sensor is in the front bumper.  
Road heat and exhaust from another vehicle can  
affect the temperature reading when your vehicle  
speed is less than 30 km/h (19 mph).  
Shows the outside temperature in Celsius.  
If the outside temperature has been below 3°C at the time you turn the ignition  
switch to ON (w*1, the outside temperature indicator blinks for 10 seconds.  
It may take several minutes for the display to be  
updated after the temperature reading has stabilized.  
■ Adjusting the outside temperature display  
Adjust the temperature reading up to 3°C if the temperature reading seems  
incorrect.  
Use the multi-information display's customized  
features to correct the temperature.  
2 Customized Features P. 131  
Rear Seat Belt Use Monitor  
■
Shows the rear seat belt use.  
2 Seat Belt Reminder P. 39  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
Continued  
127  
18 FIT JAZZ-32T5A6100.book 128 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
1Fuel Gauge  
Fuel Gauge  
■
NOTICE  
Displays the amount of fuel left in the fuel tank.  
You should refuel when the reading approaches (0.  
Running out of fuel can cause the engine to misfire,  
damaging the catalytic converter.  
The actual amount of remaining fuel may differ from  
the fuel gauge reading.  
Traffic Sign Recognition System*  
■
Shows the traffic sign recognition system.  
2 Traffic Sign Recognition System* P. 442  
Service Reminder System  
■
Shows the service reminder system.  
2 Service Reminder System P. 479  
* Not available on all models  
128  
18 FIT JAZZ-32T5A6100.book 129 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
1Speed Alarm Setting  
Speed Alarm Setting  
■
The default settings for  
(speed alarm 2) are  
(speed alarm 1) and  
(off).  
Sets the speed alarm on and changes the speed alarm setting.  
■ To set the speed alarm  
You can also return to the normal screen by selecting  
(exit).  
1. Press the  
button until the speed  
alarm setting screen appears on the display,  
then press the SEL/RESET button.  
2. Press the  
button and select  
(speed alarm 1) or  
(speed alarm 2), then  
press the SEL/RESET button.  
(off) switches to (on), then the  
display returns to the normal screen.  
u
u If the speed alarm is  
to (off).  
(on), it switches  
Continued  
129  
18 FIT JAZZ-32T5A6100.book 130 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
■ To change the speed setting  
1Speed Alarm Setting  
1. Press the  
button until the speed  
You cannot change the speed setting while driving.  
alarm setting menu appears on the display,  
then press the SEL/RESET button.  
2. Press the  
button and select the  
speed alarm 1 speed setting or speed alarm  
2 speed setting, then press the SEL/RESET  
button.  
3. Press the  
button and select the  
speed, then press the SEL/RESET button.  
u The speed setting is set, then the display  
returns to the normal screen.  
u You can set the speed setting over 5 km/h  
(mph) with 1 km/h (mph) steps.  
130  
18 FIT JAZZ-32T5A6100.book 131 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
1Customized Features  
Customized Features  
■
To customize other features, press the  
button.  
Use the multi-information display to customize certain features.  
2 List of customizable options P. 134  
2 Example of customization settings P. 137  
■ How to customize  
Select the  
(Customize Settings) screen by pressing the  
button while the  
When you customize settings:  
ignition switch is in ON (w*1, the vehicle is at a complete stop, and the shift lever is  
in (P (continuously variable transmission), and the parking brake is set (manual  
transmission). Press the SEL/RESET button to enter the customizing mode.  
Continuously variable transmission models  
Shift to (P.  
Manual transmission models  
Set the parking brake.  
Multi-Information Display:  
Goes to Customize Settings.  
Button:  
Changes the customize  
menus and items.  
SEL/RESET button:  
Enters the selected item.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
Continued  
131  
18 FIT JAZZ-32T5A6100.book 132 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
■ Customization flow  
Press the  
button.  
(Customize Settings)  
SEL/RESET  
Deflation Warning System  
4
SEL/RESET  
Clock Setup  
Adjust Clock  
4
Clock Display  
4
4
SEL/RESET  
Driver Assist System Setup  
City-Brake Active System  
Forward Collision Warning  
Distance*  
4
Traffic Sign Recognition System*  
4
* Not available on all models  
132  
18 FIT JAZZ-32T5A6100.book 133 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
4
SEL/RESET  
Meter Setup  
Language  
Warning Message  
Adjust Outside Temp. Display  
“Trip A” Reset Timing  
“Trip B” Reset Timing  
Fuel Efficiency Backlight  
Auto Idle Stop Display  
Speed Display Unit*  
4
4
Distance Display Units*  
Headlight Auto Off Timer  
Maintenance Reset  
4
SEL/RESET  
SEL/RESET  
Lighting Setup  
4
Maintenance Info.  
4
Default All  
4
SEL/RESET  
(Exit)  
* Not available on all models  
Continued  
133  
18 FIT JAZZ-32T5A6100.book 134 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
■ List of customizable options  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
Deflation  
Warning  
System  
Initialises the deflation warning system  
Cancel/Initialise  
Adjust Clock  
Clock Display  
Adjusts the time.  
Clock Setup  
Sets time display 12 hour, 24 hour, or OFF.  
12h*1/24h/OFF  
ON*1/OFF  
Turns the City-Brake Active system feature on and  
off.  
City-Brake Active System  
DriverAssist  
System  
Setup  
Forward Collision  
Warning Distance*  
Changes at which distance FCW alerts, or turns FCW  
on and off.  
Far/Normal*1/Near/OFF  
Traffic Sign Recognition  
System*  
Small Icons ON*1/Small Icons  
OFF  
Selects whether the traffic sign small icons come on.  
*1: Default Setting  
* Not available on all models  
134  
18 FIT JAZZ-32T5A6100.book 135 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
Setup Group  
Meter Setup  
*1: Default Setting  
Customizable Features  
Language  
Description  
Selectable Settings  
English*1/German/Italian/  
French/Spanish/Polish/  
Portuguese/Dutch/Danish/  
Swedish/Norwegian/Finnish/  
Russian/Turkish  
Changes the displayed language.  
Warning Message  
Switches warning message to be displayed or not.  
Adjusts the temperature reading by a few degrees.  
ON/OFF*1  
Adjust Outside Temp.  
Display  
-3°C ~ 0°C*1 ~ +3°C  
Changes the setting of how to reset trip meter A,  
average fuel economy A, average speed A, and  
elapsed time A.  
When Refueled/When  
Ignition Is Turned Off/  
Manual Reset*1  
“Trip A” Reset Timing  
Changes the setting of how to reset trip meter B,  
average fuel economy B, average speed B, and  
elapsed time B.  
When Refueled/When  
Ignition Is Turned Off/  
Manual Reset*1  
“Trip B” Reset Timing  
Fuel Efficiency Backlight  
Turns the ambient meter feature on and off.  
ON*1/OFF  
Continued  
135  
18 FIT JAZZ-32T5A6100.book 136 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
Setup Group  
Customizable Features  
Description  
Selectable Settings  
ON*1/OFF  
Selects whether the Auto Idle Stop display comes  
on or not.  
Auto Idle Stop Display  
Changes the displayed measurement of the vehicle  
speed on the multi-information display.  
Meter Setup  
Speed Display Unit*  
km/h/mph*1  
Changes the displayed measurement on the multi-  
information display.  
Distance Display Units*  
km/miles*1  
Lighting  
Setup  
Headlight Auto Off  
Timer  
Changes the length of time the exterior lights stay  
on after you close the driver’s door.  
60sec/30sec/15sec*1/0sec  
Cancel/All Due Items/  
Item A Only/Item B Only/  
Item 0 Only/Item 1 Only/  
Item 2 Only/Item 3 Only/  
Item 4 Only/Item 5 Only/  
Item 6 Only/Item 7 Only/  
Item 8 Only/Item 9 Only  
Maintenance  
Info.  
Maintenance Reset  
Reset the service reminder item(s).  
Cancels/Resets all the customized settings as  
default.  
Default All  
—
Cancel/OK  
*1: Default Setting  
* Not available on all models  
136  
18 FIT JAZZ-32T5A6100.book 137 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
■ Example of customization settings  
The steps for changing the “Trip A” Reset Timing setting to When Refueled are  
shown below. The default setting for “Trip A” Reset Timing is Manual Reset.  
1. Press the  
button until  
(customize settings) appears on the display,  
then press the SEL/RESET button.  
2. Press the  
button until Meter  
Setup appears on the display.  
3. Press the SEL/RESET button.  
Continued  
137  
18 FIT JAZZ-32T5A6100.book 138 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuGauges and Multi-Information DisplayuMulti-Information Display  
4. Press the  
button until “Trip A”  
Reset Timing appears on the display, then  
press the SEL/RESET button.  
u The display switches to the  
customization setup screen, where you  
can select When Refueled, When  
Ignition Is Turned Off, Manual Reset,  
or  
(Exit).  
5. Press the  
button and select When  
Refueled, then press the SEL/RESET  
button.  
u The When Refueled Setup screen  
appears, then the display returns to the  
customization menu screen.  
6. Press the  
button until  
(Exit)  
appears on the display, then press the SEL/  
RESET button.  
7. Repeat Step 6 until you return to the  
normal screen.  
138  

Related Topics

Indicators Multi-Information Display Warning and Information Messages Gauges and Multi-Information Display

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot