2016-2020 Honda Jazz 4 Door Safe Driving -> Child Safety User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safe Driving -> Child Safety for Your Honda Jazz 4 Door Third Generation (2016-2020)

18 FIT JAZZ-32T5A6100.book 62 ページ 2017年8月23日 水曜日 午前11時24分  
Child Safety  
Protecting Child Passengers  
Each year, many children are injured or killed in vehicle crashes because they are  
either unrestrained or not properly restrained. In fact, vehicle crashes are the  
number one cause of death of children aged 12 and under.  
1Protecting Child Passengers  
3
WARNING  
Children who are unrestrained or  
improperly restrained can be seriously  
injured or killed in a crash.  
To reduce the number of child deaths and injuries, infants and children should be  
properly restrained when they ride in a vehicle.  
Any child too small for a seat belt should be  
properly restrained in an approved child  
restraint system. A larger child should be  
properly restrained with a seat belt, using a  
booster seat if necessary.  
In many countries, the law requires all children aged 12  
and under, and whose height are shorter than 150 cm  
(60 inches) be properly restrained in a rear seat.  
In many countries, it is required to use an officially  
approved and suitable child restraint system for  
transporting a child on any passenger seat. Check  
your local legal requirement.  
European models  
Child restraintsystems must meetUN Regulation No.44  
or No. 129 or the regulations of the subject countries.  
2 Selecting a Child Restraint System P. 69  
Except European models  
We recommend that child restraint systems meet UN  
Regulation No. 44 or No. 129, or the regulations of  
the subject countries.  
62  
18 FIT JAZZ-32T5A6100.book 63 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuProtecting Child Passengers  
Children should sit properly restrained in a rear seat. This is because:  
An inflating front or side airbag can injure  
or kill a child sitting in the front seat.  
A child in the front seat is more likely to  
interfere with the driver's ability to safely  
control the vehicle.  
Statistics show that children of all sizes and  
ages are safer when they are properly  
restrained in a rear seat.  
Continued  
63  
18 FIT JAZZ-32T5A6100.book 64 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuProtecting Child Passengers  
Any child who is too small to wear a seat belt must be properly restrained in an  
approved child restraint system that is properly secured to the vehicle using the  
seat belt or the child restraint anchorage system.  
1Protecting Child Passengers  
Front Passenger’s Sunvisor  
3
WARNING  
Never hold a child on your lap because it is impossible to protect them in the  
event of a collision.  
Never put a seat belt over yourself and a child. During a crash, the belt would  
likely press deep into the child and cause serious or fatal injuries.  
Never let two children use the same seat belt. Both children could be very  
seriously injured in a crash.  
NEVER use a rearward facing child restraint  
on a seat protected by an ACTIVE AIRBAG  
in front of it, DEATH or SERIOUS INJURY to  
the CHILD can occur.  
64  
18 FIT JAZZ-32T5A6100.book 65 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuProtecting Child Passengers  
Do not allow children to operate the doors, windows or seat adjustments.  
1Protecting Child Passengers  
WARNING: Use the power window lock button to  
prevent children from opening the windows. Using  
this feature will prevent children from playing with  
the windows, which could expose them to hazards or  
distract the driver.  
Do not leave children in the vehicle unattended, especially in hot weather when  
the inside of the vehicle can get hot enough to kill them. They could also activate  
vehicle controls causing it to move unexpectedly.  
2 Opening/Closing the Power Windows  
P. 162  
WARNING: Always take the ignition key with you  
whenever you leave the vehicle alone (with other  
occupants).  
To remind you of the passenger’s front airbag  
hazards and child safety, your vehicle has the  
warning label on the sun visor.  
Please read and follow the instructions on the label.  
2 Safety Labels P. 83  
65  
18 FIT JAZZ-32T5A6100.book 66 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
Safety of Infants and Small Children  
1Protecting Infants  
Protecting Infants  
An infant must be properly restrained in a rear-facing, reclining child restraint system  
until the infant reaches the restraint system manufacturer's weight or height limit  
for the seat, and the infant is at least one year old.  
Positioning a rear-facing child restraint  
system  
3
WARNING  
Placing a rear-facing child restraint system  
in the front seat can result in serious injury  
or death if the passenger’s front airbag  
inflates.  
Child restraint system must be placed and  
secured in a rear seating position.  
Always place a rear-facing child restraint  
system in the back seat, not the front.  
As required by UN Regulation No. 94:  
3
WARNING  
NEVER use a rearward facing child restraint  
on a seat protected by an ACTIVE AIRBAG  
in front of it, DEATH or SERIOUS INJURY to  
the CHILD can occur.  
66  
18 FIT JAZZ-32T5A6100.book 67 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
When properly installed, a rear-facing child restraint system may prevent the driver  
or a front passenger from moving their seat all the way back, or from locking their  
seat-back in the desired position.  
1Protecting Infants  
Many experts recommend use of a rear-facing child  
restraint system for a child up to two years old if the  
child’s height and weight are appropriate for a rear-  
facing child restraint system.  
If the passenger’s front airbag inflates, it can hit the  
rear-facing child restraint system with great force,  
which can dislodge or strike the system, and seriously  
injure the child.  
Rear-facing child restraint systems should never be  
installed in a front facing position.  
Always refer to the child restraint system  
manufacturer’s instructions before installation.  
If it is absolutely unavoidable to install a rear-facing  
child restraint system in the front passenger seat,  
manually turn off the passenger front airbag system.  
2 Passenger Front Airbag Off System P. 54  
Continued  
67  
18 FIT JAZZ-32T5A6100.book 68 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
1Protecting Smaller Children  
Protecting Smaller Children  
If a child is at least one year old and has exceeded the weight and height limitations  
of a rear-facing child restraint system, the child should be properly restrained in a  
firmly secured front facing child restraint system until they exceed the weight and  
height limitations for the front facing child restraint system.  
Front facing child restraint system  
3
WARNING  
Placing a front facing child restraint system  
in the front seat can result in serious injury  
or death if the front airbag inflates.  
placement  
We strongly recommend placing a front  
facing child restraint system in a rear seating  
If you must place a front facing child  
restraint system in front, move the vehicle  
seat as far back as possible, and properly  
restrain the child.  
position.  
Educate yourself about the laws and regulations  
regarding child restraint system use where you are  
driving, and follow the child restraint system  
manufacturer's instructions.  
Placing a front facing child restraint system in the front seat can be hazardous. A  
rear seat is the safest place for a child.  
68  
18 FIT JAZZ-32T5A6100.book 69 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
1Selecting a Child Restraint System  
Selecting a Child Restraint System  
Installation of a lower anchorage-compatible child  
restraint system is simple.  
Some child restraint systems are lower anchorage compatible. Some have a rigid-  
type connector, while others have a flexible-type connector. Both are equally easy to  
use. Some existing and previously owned child restraint systems can only be installed  
using the seat belt. Whichever type you choose, follow the child restraint system  
manufacturer’s use and care instructions including recommended expiration dates  
as well as the instructions in this manual. Proper installation is key to maximizing  
your child’s safety.  
Lower anchorage-compatible child restraint systems  
have been developed to simplify the installation  
process and reduce the likelihood of injuries caused  
by incorrect installation.  
We recommend a rear-facing or a front facing Honda  
genuine ISOFIX child restraint system for infants or  
small children, respectively. Ask your dealer.  
The flexible type may not be available in your country.  
In seating positions and vehicles not equipped with lower anchorages, install a child  
restraint system using the seat belt and a top tether for added security. This is  
because all child restraint systems must be secured with the seat belt when the  
lower anchorage system is not in use. In addition, the child restraint system  
manufacturer may advise that a seat belt be used to attach an ISO FIX restraint  
system once a child reaches a specified weight. Please read the child restraint system  
owner’s manual for proper installation instructions.  
Important consideration when selecting a child restraint system  
Make sure the child restraint system meets the following three requirements:  
The child restraint system is the correct type and size for the child.  
The child restraint system is the correct type for the seating position.  
The child restraint system is compliant with safety standards. We recommend a  
child restraint system compliant with UN Regulation No. 44 or No. 129, or the  
regulations of the subject countries. Look for the approval mark on the system  
and the manufacturer’s statement of compliance on the box.  
Continued  
69  
18 FIT JAZZ-32T5A6100.book 70 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
The Recommended Child Restraint Systems for EU Countries  
Various types of child restraint systems are available. Not all types are suitable for your vehicle. Please refer to the table below to select  
which category of child restraint system can be used on each seating position.  
Seating position  
Front passenger  
Rear passenger  
Mass group  
Passenger front airbag ON/OFF  
switch position  
OFF  
ON  
X
X
Rear outboard  
Rear centre  
U*3,*4  
group 0  
group 0+  
group I  
group II  
group III  
Up to 10 kg  
Up to 13 kg  
9 kg to 18 kg  
15 kg to 25 kg  
22 kg to 36 kg  
U*1,*2,*4,*5  
U*1,*2,*4,*5  
U*1,*2,*4,*5  
U*1,*2,*4,*5  
U*1,*2,*4,*5  
U*3,*4  
IL (Honda BABY-SAFE ISOFIX), or U*3,*4  
IUF (Size class A, B1, B) or U*3,*4  
L (Honda KID FIX XP SICT) or U*3,*4  
L (Honda KID FIX XP SICT) or U*3,*4  
U*3,*4  
U*3,*4  
U*3,*4  
U*3,*4  
UF*1,*2,*4,*5  
UF*1,*2,*4,*5  
UF*1,*2,*4,*5  
IL:  
Suitable for particular ISO FIX child restraint systems (CRS) given in this list.  
IUF: Suitable for front facing ISOFIX child restraints system of universal category approved for use in this mass group.  
L:  
Suitable for particular child restraint systems given in this table. These restraints may be of the “specific vehicle,” “restricted,” or  
“semi-universal” category.  
U:  
Suitable for “universal” category restraints approved for use in this mass group.  
UF: Suitable for front facing “universal” category restraints approved for use in this mass group.  
X: Seat position not suitable for children in this mass group.  
70  
18 FIT JAZZ-32T5A6100.book 71 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
Models with front seat height adjustment  
*1: Move the front seat to its slide rail rearmost position.  
*2: Adjust seat height to the most upper end position.  
*3: Adjust seat-back angle to the upright position (Front most lock position).  
Models without front seat height adjustment  
*4: Adjust seat-back angle to the upright position (Front most lock position).  
*5: Move the front seat to its slide rail rearmost position.  
Seating position in the vehicle  
Rear outer seat  
i-U  
Front seat  
Rear centre seat  
i-Size child restraint systems  
X
X
i-U: Suitable for i-Size “universal” Child Restraint Systems for forward and rearward facing.  
X: Seating position not suitable for i-Size “universal” Child Restraint systems.  
A size class is specified for some child restraint systems. Make sure to check the size class as indicated on the manufacturer’s instructions,  
package, and labels of the child restraint.  
The particular child restraints in the table are Honda Genuine Parts. They are available from your dealer.  
For a correct installation, please refer to the Child Restraint Instruction Manual.  
Continued  
71  
18 FIT JAZZ-32T5A6100.book 72 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
1Installing a Lower Anchorage-Compatible Child Restraint System  
Installing a Lower Anchorage-Compatible Child Restraint  
System  
3
WARNING  
A lower anchorage-compatible child restraint system can be installed in either of the  
two outer rear seats. A child restraint system is attached to the lower anchorages  
with either the rigid or flexible type of connectors.  
Never attach two child restraint system to  
the same anchor. In a collision, one anchor  
may not be strong enough to hold two  
child restraint system attachments and may  
break, causing serious injury or death.  
1. Locate the lower anchorages under the  
marks.  
Marks  
2. Make sure to lock the seat-back in the  
upright position.  
3. Lower the head restraint to its lowest  
position.  
Some child restraint systems come with optional  
guide-cups, which avoid possible damage to the seat  
surface. Follow the manufacturer’s instructions when  
using the guide-cups, and attach them to the lower  
anchorages as shown in the image.  
Lower Anchorage  
4. Place the child restraint system on the  
vehicle seat then attach the child restraint  
system to the lower anchorages according  
to the instructions that came with the  
child restraint system.  
u When installing the child restraint  
Guide-cup  
system, make sure that the lower  
anchorages are not obstructed by the  
seat belt or any other object.  
Rigid Type  
Lower Anchorages  
72  
18 FIT JAZZ-32T5A6100.book 73 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
1Installing a Lower Anchorage-Compatible Child Restraint System  
For your child's safety, when using a child restraint  
system installed using the lower anchorage system,  
make sure that the child restraint system is properly  
secured to the vehicle. A child restraint system that is  
not properly secured will not adequately protect a  
child in a crash and may cause injury to the child or  
other vehicle occupants.  
Lower Anchorages Flexible Type  
The flexible type may not be available in your country.  
5. Open the tether anchorage cover.  
Cover  
WARNING: Never use a hook that does not come  
with a Top Tether anchor symbol when securing an  
installed child restraint system.  
6. Route the tether strap over the seat-back.  
Make sure the strap is not twisted.  
7. Secure the tether strap hook to the  
anchorage.  
8. Tighten the tether strap as instructed by  
the child restraint system manufacturer.  
Top Tether Anchor Symbol  
9. Make sure the child restraint system is  
FR  
firmly secured by rocking it forward and  
back, and side to side; little movement  
should be felt.  
10. Make sure any unused seat belt that a  
child can reach is buckled.  
Anchorage Tether  
Strap  
Hook  
Continued  
73  
18 FIT JAZZ-32T5A6100.book 74 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
Child restraint system with support leg  
5. Stretch the support leg until it touches the  
floor as instructed by the child restraint  
system manufacturer.  
u Confirm that the section of the floor on  
which the support leg rests is level. If the  
section is not level, the support leg will  
not provide adequate support. If this is  
the case, move the seat forward or back  
so that the support leg is resting on a  
level section.  
Support Leg  
74  
18 FIT JAZZ-32T5A6100.book 75 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
1Installing a Child Restraint System with a Lap/Shoulder Seat Belt  
Installing a Child Restraint System with a Lap/Shoulder Seat  
Belt  
A child restraint system that is not properly secured  
will not adequately protect a child in a crash and may  
cause injury to the child or other vehicle occupants.  
1. Make sure to lock the seat-back in the  
upright position.  
2. Lower the head restraint to its lowest  
position.  
3. Place the child restraint system on the  
vehicle seat.  
4. Route the seat belt through the child  
restraint system according to the child  
restraint system manufacturer's  
instructions, and insert the latch plate into  
the buckle.  
u Insert the latch plate fully until it clicks.  
Continued  
75  
18 FIT JAZZ-32T5A6100.book 76 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
5. Push down the tab. Route the shoulder  
part of the belt into the slit at the side of  
the restraint.  
6. Grab the shoulder part of the belt near the  
buckle, and pull up to remove any slack  
from the lap part of the belt.  
Tab  
u When doing this, place your weight on  
child restraint system and push it into  
the vehicle seat.  
7. Position the belt properly and push up the  
tab. Make sure the belt is not twisted.  
u When pushing up the tab, pull up the  
upper shoulder part of the belt to  
remove any slack from the belt.  
8. Make sure the child restraint system is  
firmly secured by rocking it forward and  
back, and side to side; little movement  
should be felt.  
9. Make sure any unused seat belt that a  
child can reach is buckled.  
76  
18 FIT JAZZ-32T5A6100.book 77 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
Except European models  
Locking Clip  
If your child restraint system does not come  
with a mechanism that secures the belt, install  
a locking clip on the seat belt.  
After going through the step 1 and 4, pull up  
the shoulder part of the belt and make sure  
there is no slack in the lap portion.  
5. Tightly grasp the belt near the latch plate.  
Pinch both parts of the belt together so  
they do not slip through the latch plate.  
Unbuckle the seat belt.  
6. Install the locking clip as shown in the  
image. Position the clip as close as possible  
to the latch plate.  
7. Insert the latch plate into the buckle. Go to  
step 8 and 9.  
Continued  
77  
18 FIT JAZZ-32T5A6100.book 78 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Infants and Small Children  
1Adding Security with a Tether  
Adding Security with a Tether  
WARNING: Child restraint anchorages are designed  
to withstand only those loads imposed by correctly  
fitted child restraints. Under no circumstances are  
they to be used for adult seat belts, harnesses or for  
attaching other items or equipment to the vehicle.  
Two tether anchorage points are provided on  
Tether Anchorage  
Points  
the ceiling for rear outer seating positions. If  
you have a child restraint system that comes  
with a tether but can be installed with a seat  
belt, the tether may be used for additional  
security.  
Cover  
Always use a tether for forward facing child seats  
when using the seat belt or lower anchors.  
1. Locate the appropriate tether anchorage  
point.  
2. Lower the head restraint to its lowest  
position.  
3. Open the anchorage cover.  
FR  
4. Route the tether strap over the seat-back.  
Make sure the strap is not twisted.  
5. Secure the tether strap hook onto the  
anchorage.  
6. Tighten the tether strap as instructed by the  
child restraint system manufacturer.  
Anchorage Tether  
Strap  
Hook  
78  
18 FIT JAZZ-32T5A6100.book 79 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Larger Children  
Safety of Larger Children  
1Safety of Larger Children  
Protecting Larger Children  
The following pages give instructions on how to check proper seat belt fit, what kind  
of booster seat to use if one is needed, and important precautions for a child who  
must sit in front.  
3
WARNING  
Allowing a child aged 12 or under to sit in  
front can result in injury or death if the  
passenger's front airbag inflates.  
Checking Seat Belt Fit  
If a larger child must ride in front, move the  
vehicle seat as far to the rear as possible,  
have the child sit up properly and wear the  
seat belt properly, using a booster seat if  
needed.  
When a child is too big for a child restraint system, secure the child in a rear seat  
using the lap/shoulder seat belt. Have the child sit upright and all the way back, then  
answer the following questions.  
Checklist  
Do the child's knees bend comfortably over  
the edge of the seat?  
Does the shoulder belt cross between the  
child's neck and arm?  
Is the lap part of the seat belt as low as  
possible, touching the child's thighs?  
Will the child be able to stay seated like this  
for the whole trip?  
If you answer yes to all these questions, the child is ready to wear the lap/shoulder  
seat belt correctly. If you answer no to any question, the child needs to ride on a  
booster seat until the seat belt fits properly without a booster seat.  
Continued  
79  
18 FIT JAZZ-32T5A6100.book 80 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Larger Children  
1Booster Seats  
Booster Seats  
When installing a booster seat, make sure to read the  
instructions that came with it, and install the seat  
accordingly.  
There are high- and low-type booster seats. Choose a  
booster seat that allows the child to wear the seat  
belt correctly.  
If a lap/shoulder seat belt cannot be used  
properly, position the child in a booster seat in  
the rear seat. For the child's safety, check that  
the child meets the booster seat  
manufacturer's recommendations.  
We recommend a booster seat with a backrest as it is  
easier to adjust the shoulder belt.  
A backrest is available for a specific booster  
seat. Install the backrest to the booster seat  
and adjust it to the vehicle seat according to  
the booster seat manufacturer's instructions.  
Make sure the seat belt is properly routed  
through the guide at the shoulder of the  
backrest and the belt does not touch and  
cross the child’s neck.  
Guide  
80  
18 FIT JAZZ-32T5A6100.book 81 ページ 2017年8月23日 水曜日 午前11時24分  
uuChild SafetyuSafety of Larger Children  
Protecting Larger Children - Final Checks  
Your vehicle has a rear seat where children can be properly restrained. If you ever  
have to carry a group of children, and a child must ride in front:  
Make sure you read and fully understand the instructions and safety information  
in this manual.  
Move the front passenger seat as far back as possible.  
Have the child sit upright and well back in the seat.  
Check that the seat belt is properly positioned so that the child is secure in the  
seat.  
Monitoring child passengers  
We strongly recommend that you keep an eye on child passengers. Even older, more  
mature children sometimes need to be reminded to fasten their seat belts and sit up  
properly.  
81  

Related Topics

Popular Owner Manuals