Vehicle Stability Assist (VSA) System
VSA helps to stabilise the vehicle during cornering if the vehicle turns more or less
than what was intended. It also assists in maintaining traction on slippery surfaces.
It does so by regulating engine and motor output and selectively applying the
brakes.
When VSA activates, you may notice that the
engine and motor do not respond to the
accelerator. You may also notice some noise
from the hydraulic brake system. You will also
see the indicator blink.
■
VSA Operation
1Vehicle Stability Assist (VSA) System
The VSA may not function properly if tyre type and
size are mixed. Make sure to use the same size and
type of tyre, and the air pressures as specified.
When the VSA system indicator comes on and stays
on while driving, there may be a problem with the
system. While this may not interfere with normal
driving, have your vehicle checked by a dealer
immediately.
VSA cannot enhance stability in all driving situations
and does not control the entire braking system. You
still need to drive and corner at speeds appropriate
for the conditions and always leave a sufficient
margin of safety.
The main function of the VSA system is generally
known as Electronic Stability Control (ESC). The
system also includes a traction control function.
The adaptive cruise control (ACC) with low speed
follow, vehicle stability assist (VSA) system, vehicle
stability assist (VSA)
OFF
, low tyre pressure/deflation
warning system, road departure mitigation and safety
support indicators may come on in amber along with a
message in the gauge when you set the power mode to
ON after reconnecting the 12-volt battery.
Drive a short distance at more than 20 km/h
(12 mph). Each indicator should go off. If any do not,
have your vehicle checked by a dealer.