Ease of use and comfort -> Front seats for Your Peugeot 3008 SUV Third Generation (2024-2025)

Ease of use and comfort  
Before moving the seat backwards,  
ensure that there is no person or object  
that might prevent the full travel of the seat.  
There is a risk of trapping or pinching  
passengers if present in the rear seats or of  
jamming the seat if large objects are placed  
on the floor behind the seat.  
The head restraint is correctly adjusted  
when its upper edge is level with the top  
of the occupant's head.  
PEUGEOT i-Cockpit  
3
Removing a head restraint  
► Pull the head restraint fully up.  
► Press lug A to release the head restraint and  
raise it fully.  
► Stow the head restraint securely.  
Front seats  
Refitting a head restraint  
Front head restraints  
► Insert the head restraint rods into the guides  
in the corresponding seat backrest.  
► Push the head restraint fully down.  
► Press the lug A to release the head restraint  
and push it down.  
Before taking to the road and to make the  
most of the ergonomic layout of the PEUGEOT  
i-Cockpit, carry out these adjustments in the  
following order:  
Adjusting the height  
► Adjust the height of the head restraint.  
– head restraint height.  
– seat backrest angle.  
– seat cushion height.  
– longitudinal seat position.  
Never drive with the head restraints  
removed; they should be in place and  
adjusted for the occupant of the seat.  
– steering wheel reach and then height.  
– rear view mirror and door mirrors.  
Manually-adjustable seats  
Once these adjustments have been  
made, check that the "head-up"  
instrument panel can be viewed correctly over  
the smaller diameter steering wheel.  
Upwards:  
Longitudinal  
► Pull the head restraint up to the desired  
position; you can feel the head restraint clicking  
into position.  
Downwards:  
► Press lug A to lower the head restraint.  
43  
Ease of use and comfort  
► Raise the control bar and slide the seat  
forwards or backwards.  
Electrically-adjustable seats Electric lumbar adjustment  
► Release the control bar to lock the seat in  
position on one of the notches.  
Longitudinal  
Backrest angle  
► Press the + or - control to obtain the desired  
lumbar support.  
► Push the control forwards or backwards to  
slide the seat.  
Massage function  
(Driver’s seat only)  
► Turn the knob to obtain the desired angle.  
Backrest angle  
Height  
► Tilt the control forwards or rearwards.  
This function provides lumbar massage; it only  
operates when the engine is running as well as  
in STOP mode of the Stop & Start system.  
► Pull the control upwards to raise or push it  
downwards to lower, until you obtain the position  
required.  
Cushion height and angle  
Activation/Deactivation  
► Press this button to activate/deactivate  
the function.  
Upon activation, the indicator lamp comes on.  
The massage function is activated for a period  
of one hour.  
During this time, massage is performed in  
6 cycles of 10 minutes (6 minutes of massage  
followed by a 4-minute break).  
► Tilt the rear of the control upwards or  
downwards to obtain the required height and  
angle.  
44  
Ease of use and comfort  
► Adjust the height and reach to suit your  
driving position.  
► Push the control to lock the steering wheel.  
After one hour, the function is deactivated; the  
indicator lamp goes off.  
consumption in turn decreases energy  
consumption.  
3
Heated seats  
Prolonged use of heated seats is not  
recommended for people with sensitive  
skin.  
For safety reasons, these adjustments  
must only be carried out with the vehicle  
stationary.  
There is a risk of burns for people whose  
perception of heat is impaired (e.g. illness,  
taking medication).  
To keep the heated pad intact and to prevent  
a short circuit:  
Mirrors  
Door mirrors  
– Do not place heavy or sharp objects on the  
seat.  
As a safety measure, the mirrors should  
be adjusted to reduce the "blind spots".  
The objects that you see in the mirrors are  
in fact closer than they appear. Take this  
into account in order to correctly judge the  
distance of vehicles approaching from behind.  
The function is active only with the engine  
running and when the outside temperature is  
below 20°C.  
► Press the button corresponding to the seat.  
► Each press changes the heating level; the  
corresponding number of indicator lamps come  
on.  
To switch off the heating, press the button  
until all of the indicator lamps are off.  
The system status is memorised when the  
ignition is switched off.  
– Do not kneel or stand on the seat.  
– Do not spill liquids onto the seat.  
– Never use the heating function if the seat  
is damp.  
Steering wheel  
adjustment  
Do not use the function when the seat  
is not occupied.  
Reduce the heating intensity as soon as  
possible.  
When the seat and passenger compartment  
have reached a satisfactory temperature,  
switch the function off; reducing electrical  
► When stationary, pull the control to release  
the steering wheel.  
45