Ease of use and comfort
programmed time when the vehicle is connected
(20 minutes when it is not connected) and is
maintained for 10 minutes after.
Temperature pre-
conditioning (Electric)
This function allows you to programme the
temperature in the passenger compartment to
reach a pre-defined, non-modifiable temperature
(approx. 21°C) before you enter the vehicle, on
the days and at the times of your choice.
This function is available when the vehicle is
connected or not connected.
Interior fittings
3
You can set multiple programmes.
Each one is saved in the system.
To optimise the driving range, we recommend
starting a programme while the vehicle is
connected.
Programming can also be carried out
from a smartphone using the
Programming
With Touch screen 10" & Bluetooth Radio
& Telephone
MYPEUGEOT APP application.
For more information on Remotely operable
additional functions, refer to the corresponding
section.
1. Grab handle
2. Sun visor
3. Glove box
4. Door pockets
In the Climate > OPTIONS menu:
Select Temperature conditioning.
The fan noise that occurs during
temperature pre-conditioning is perfectly
normal.
► Press + to add a programme.
5. Storage compartment or Storage
compartment with flap or Wireless
smartphone charger with flap (depending on
version)
► Press the top centre of the flap to open it.
6. Storage compartment with 12 V accessory
socket
7. Cup holder
8. Adjustable centre armrest with storage
compartment
► Select the time of entry into the vehicle and
the desired days. Press OK.
► Press ON to activate this programme.
Operating conditions
– The function is only activated when the
ignition is switched off and the vehicle
locked.
– When the vehicle is not connected, the
function is only activated if the battery charge
level is greater than 30%.
– When the vehicle is not connected and a
recurring programme is active (e.g. from Monday
to Friday), if two temperature pre-conditioning
sequences are run without the vehicle being
used, the programme will be deactivated.
With PEUGEOT i-Connect Advanced -
PEUGEOT i-Connect
In the Climate touch screen application,
select the Preconditioning tab.
► Press + to add a programme.
► Select the time of entry into the vehicle and
the desired days. Press OK.
► Press ON to activate this programme.
The temperature pre-conditioning sequence
begins approximately 45 minutes before the
Rear USB socket(s) (depending on version)
Make sure you do not leave any item in
the passenger compartment which could
53