Maintenance
Light bulbs
Lamp part malfunction due to net-
work failure
NOTICE
䳜 If the light bulb or lamp connector
is removed from an operating
lamp activated by electricity, the
fuse box䳓s electronic device may
The headlamp, taillight, and fog light
may light up when the head lamp
switch is turned ON, and not light up
when the taillight or fog light switch
is turned ON. This may be caused by
network failure or vehicle electrical
control system malfunction. If there
scan it as a malfunction. There
-
fore, a lamp malfunction history
may be recorded in Diagnostic
Trouble Code (DTC) in the fuse
box.
is a problem, have the system ser
viced by a professional workshop.
-
Kia recommends to visit an autho
-
rized Kia dealer/service partner.
NOTICE
After an accident or after the head
light assembly is reinstalled, have
the headlight aiming adjusted by a
-
Lamp part malfunction due to elec
trical control system stabilization
-
A normally functioning lamp may
professional workshop. Kia recom
mends to visit an authorized Kia
dealer/service partner.
-
flicker momentarily. This momen
-
tary occurrence is due to stabiliza
tion function of the vehicle's
-
electrical on control system. If the
lamp soon returns to normal, the
vehicle does not require service.
NOTICE
Traffic Change (For Europe)
The low beam light distribution is
asymmetric. If you go abroad to a
country with opposite traffic direc
However, if the lamp goes out after
the momentary flickering, or the
8
-
flickering continues, have the sys
-
tion, this asymmetric part will daz
zle oncoming car driver. To prevent
dazzle, ECE regulation demand sev
-
tem serviced by a professional
workshop. Kia recommends to visit
an authorized Kia dealer/service
partner.
-
eral technical solutions (ex. auto
-
matic change system, adhesive
sheet, down aiming). This head
-
lamps are designed not to dazzle
opposite drivers. So, you need not
change your headlamps in a country
with opposite traffic direction.
8
69