Get Knowing your vehicle -> Audio system Guide for Kia Rio 4 Door Second Generation (2006-2010)

3 81

Knowing your vehicle

AM and FM radio signals are broadcast

from transmitter towers located around

your city. They are intercepted by the

radio antenna on your car. This signal is

then received by the radio and sent to

your car speakers.

When a strong radio signal has reached

your vehicle, the precise engineering of

your audio system ensures the best pos-

sible quality reproduction. However, in

some cases the signal coming to your

vehicle may not be strong and clear. This

can be due to factors such as the dis-

tance from the radio station, closeness of

other strong radio stations or the pres-

ence of buildings, bridges or other large

obstructions in the area.

AM broadcasts can be received at

greater distances than FM broadcasts.

This is because AM radio waves are

transmitted at low frequencies. These

long, low frequency radio waves can fol-

low the curvature of the earth rather than

travelling straight out into the atmos-

phere. In addition, they curve around

obstructions so that they can provide bet-

ter signal coverage.

FM broadcasts are transmitted at high

frequencies and do not bend to follow the

earth's surface. Because of this, FM

broadcasts generally begin to fade at

short distances from the station. Also,

FM signals are easily affected by build-

ings, mountains, or other obstructions.

These can result in certain listening con-

ditions which might lead you to believe a

problem exists with your radio. The fol-

lowing conditions are normal and do not

indicate radio trouble:

AUDIO SYSTEM - HOW CAR AUDIO WORKS

¢ ¢ ¢

JBM001

¢ ¢ ¢

JBM002 JBM003

FM reception AM(MW, LW) reception FM radio station

Knowing your vehicle

823

• Fading - As your car moves away from

the radio station, the signal will weaken

and sound will begin to fade. When this

occurs, we suggest that you select

another stronger station.

• Flutter/Static - Weak FM signals or

large obstructions between the trans-

mitter and your radio can disturb the

signal causing static or fluttering nois-

es to occur. Reducing the treble level

may lessen this effect until the distur-

bance clears.

• Station Swapping - As a FM signal

weakens, another more powerful sig-

nal near the same frequency may

begin to play. This is because your

radio is designed to lock onto the clear-

est signal. If this occurs, select anoth-

er station with a stronger signal.

• Multi-Path Cancellation - Radio signals

being received from several directions

can cause distortion or fluttering. This

can be caused by a direct and reflect-

ed signal from the same station, or by

signals from two stations with close

frequencies. If this occurs, select

another station until the condition has

passed.

Using a cellular phone or a two-

way radio

When a cellular phone is used inside the

vehicle, noise may be produced from the

audio equipment. This does not mean

that something is wrong with the audio

equipment. In such a case, use the cellu-

lar phone at a place as far as possible

from the audio equipment.

¢ ¢ ¢

JBM004 JBM005

CAUTION

When using a communication sys-

tem such a cellular phone or a radio

set inside the vehicle, a separate

external antenna must be fitted.

When a cellular phone or a radio set

is used with an internal antenna

alone, it may interfere with the vehi-

cle's electrical system and adverse-

ly affect safe operation of the vehi-

cle.

WARNING

Don’t use a cellular phone when

you are driving. You must stop at a

safe place to use a cellular phone.

3 83

Knowing your vehicle

Care of cassette tapes

(if equipped)

• Because the thickness of a cassette tape

with the total playback time of over 60

minutes (C-60) are too thin, we suggest

that you do not use any of them to avoid

having tapes being tangled.

• To achieve better sound quality, periodi-

cally clean the tape head using a cotton

stick with colorless alcohol (once per

month).

• If a tape is too loose, fasten it to reel by

winding with objects like a pencil.

• Because dust or foreign objects on a cas-

sette tape may damage the playback

head, always store tapes in their cases

when not in use.

• Make sure cassette tapes are kept away

from magnetic devices (TV, stereo sys-

tem, etc) in order to achieve better sound

quality.

• Be certain that no objects or substances

other than cassette tapes are inserted

into the cassette tape player.

• Because tape media can be distorted

when exposed to direct sunlight, Do not

leave cassette tapes on the seats, dash-

board or near the back windshield.

Care of disc (if equipped)

• If the temperature inside the car is too

high, open the car windows for ventila-

tion before using your car audio.

• It is illegal to copy and use

MP3/WMA/AAC/WAVE files without

permission. Use CDs that are created

only by lawful means.

• Do not apply volatile agents such as

benzene and thinner, normal cleaners

and magnetic sprays made for ana-

logue disc onto CDs.

• To prevent the disc surface from get-

ting damaged. Hold and carry CDs by

the edges or the edges of the center

hole only.

• Clean the disc surface with a piece of

soft cloth before playback (wipe it from

the center to the outside edge.)

• Do not damage the disc surface or

attach pieces of sticky tape or paper

onto it.

• Make sure on undesirable matter other

than CDs are inserted into the CD

player (Do not insert more than one

CD at a time).

• Keep CDs in their cases after use to

protect them from scratches or dirt.

• Depending on the type of CD-R/CD-

RW CDs, certain CDs may not operate

normally according to manufacturing

companies or making and recording

methods. In such circumstances, if you

still continue to use those CDs, they

may cause the malfunction of your car

audio system.

✽✽

NOTICE - Playing an

Incompatible Copy-Protected

Audio CD

Some copy-protected CDs, which do not

comply with the international audio CD

standards(Red Book), may not play on

your car audio. Please note that if you

try to play copy protected CDs and the

CD player of your car audio is not per-

forming to your expectation, this may be

caused by those CDs and not a defect in

the device itself. Please replace those

CDs.

Knowing your vehicle

843

AUDIO SYSTEM - STEREO RADIO OPERATION (M445) (IF EQUIPPED)

1. POWER ON-OFF, VOLUME Control

Knob

2. BAND Select Buttons

3. TUNE/MODE Select Knob

4. AUTO SEEK Select Button

5. SCAN Button

6. EQ Button

7. PRESET STATION Select Buttons

JBM445NA

3 85

Knowing your vehicle

1. POWER ON-OFF Control Knob

The radio unit may be operated when the

ignition key is in the “ACC”or “ON” posi-

tion. Press the knob to switch the power

on.The LCD shows the radio frequency in

radio mode, and displays the CD track in

CD mode. To switch the power off, press

the knob again.

VOLUME Control

Rotate the knob clockwise to increase

the volume and turn the knob counter-

clockwise to reduce the volume.

2. BAND Selector

FM Selection Button

Pressing the button changes the

FM1 and FM2 bands.

AM Selection Button

Pressing the button selects the

AM band. AM mode is displayed on LCD.

3. TUNE/MODE Select Knob

Rotate the knob clockwise to increase

the frequency and turn the knob counter-

clockwise to reduce the frequency.

Mode Select Knob

Pressing the MODE knob changes the

BASS, MIDDLE, TREBLE, FADER and

BALANCE mode.

The mode selected is shown on the dis-

play.

After selecting the desired mode, rotate

the mode select knob clockwise or coun-

terclockwise to adjust.

BASS Control

To increase the BASS, rotate the knob

clockwise, to decrease the BASS, rotate

the knob counterclockwise.

MID Control

To increase the MID, rotate the knob

clockwise, to decrease the MID, rotate

the knob counterclockwise.

TREBLE Control

To increase the TREBLE, rotate the knob

clockwise, to decrease the TREBLE,

rotate the knob counterclockwise.

FAD (Fader Control)

Rotate the control knob clockwise to

emphasize rear speaker sound (front

speaker sound will be attenuated). When

the control knob is turned counterclock-

wise, front speaker sound will be empha-

sized (rear speaker sound will be attenu-

ated).

BALANCE Control

Rotate the knob clockwise to emphasize

right speaker sound (left speaker sound

will be attenuated). When the control

knob is turned counterclockwise, left

speaker sound will be emphasized (right

speaker sound will be attenuated).

Knowing your vehicle

863

4. AUTO SEEK Select Button

(Automatic Channel Selection)

Press the AUTO SEEK select button.

When the side is pressed, the unit

will automatically tune to the next higher

frequency and when the side is

pressed, it will automatically tune to the

next lower frequency.

5. SCAN Button

When you Press the button, frequency is

changed and the next channel is

received automatically.

To stay on a station, press the SCAN but-

ton again.

6. EQ Button

Press the EQ button to select the CLAS-

SIC, POPS, ROCK, JAZZ and OFF

MODE for the desired tone quality. Each

press of the button changes the display

as follows;

7. PRESET STATION Select

Buttons

Six (6) stations for AM, FM1 and FM2

respectively can be preset in the elec-

tronic memory circuit.

HOW TO PRESET STATIONS

Six AM and twelve FM stations may be

programmed into the memory of the

radio. Then, by simply pressing the AM /

FM select buttons and/or one of the six

station select buttons, you may recall any

of these stations instantly. To program the

stations, follow these steps:

• Press AM/FM selector to set the band

for AM, FM1 and FM2.

• Select the desired station to be stored

by seek or manual tuning.

• Determine the preset station select

button you wish to use to access that

station.

• Press the station select button for more

than two seconds. A select button indi-

cator will show in the display indicating

which select button you have

depressed. The frequency display will

flash after it has been stored into the

memory. You should then release the

button, and proceed to program the

next desired station. A total of 18 sta-

tions can be programmed by selecting

one AM and two FM station per button.

• When completed, any preset station

may be recalled by selecting AM, FM1

or FM2 band and the appropriate sta-

tion button.

CAUTION

• Do not place beverages close to

the audio system. The audio sys-

tem mechanism may be damaged

if you spill them.

• Do not strike or allow anything to

impact the audio system, damage

to the system mechanisms could

occur.

CLASSIC➟POPS➟ROCK➟JAZZ➟OFF

3 87

Knowing your vehicle

AUDIO SYSTEM - COMPACT DISC PLAYER OPERATION (M445) (IF EQUIPPED)

JBM445NA

1. CD Select Button

2. Track Up/Down Button

3. Fast Up/Down Button

4. RPT(Repeat) Button

5. SCAN Button

6. CD Eject Button

7. RDM(Random) Button

Knowing your vehicle

883

1. CD Select Button

• Insert the CD with the label facing

upward.

• Insert the CD to start CD playback,

during radio operation.

• When a disc is in the CD deck, if you

press the CD button the CD player will

begin playing even if the radio player is

being used.

• The CD player can be used when the

ignition switch is in either the “ON” or

“ACC” position.

✽✽

NOTICE

• Do not stick paper or tape etc., on the

label side or the recording side of any

discs, as it may cause a malfunction.

• The unit cannot play a CD-

R(Recordable CD) and CD-

RW(Rewritable CD) that is not final-

ized.

Please refer to the manual of CD-

R/CD-RW recorder or CD-R/CD-RW

software for more information on

finalization process.

• Depending on the recording status,

some CD-Rs/CD-RWs may not be

played on this unit.

2. TRACK UP/DOWN Button

• The desired track on the disc currently

being played can be selected using the

track number.

• Press button once to skip forward

to the beginning of the next track.

Press within a second after play-

back begins to quickly move backward

through a CD.

If you press after more than a sec-

ond, it will take you to the beginning of

the track you are now listening to.

3. FF/REW Button

If you want to fast forward or reverse

through the compact disc track, push and

hold the FF or REW button.

When you release the button, the com-

pact disc player will resume playing.

4. REPEAT (RPT) Button

• To repeat the track you are currently

listening to, press the RPT button. To

cancel, press it again.

• If you do not release RPT operation

when the track ends, it will automati-

cally be replayed.

This process will be continued until you

push the button again or turn the radio

OFF then ON.

5. SCAN Button

• To playback the first 10 seconds of

each track, press the SCAN button.

• Press the SCAN button again within 10

sec. when you have reached the

desired track.

6. CD EJECT Button

When the button is pressed with a CD

loaded, the CD will eject.

Forcing to eject : To force to eject a

CD, press this button for more than 3

seconds.

(Do this only when a CD is jammed

and you can not eject it in the normal

way - e.g.) in case that you have

inserted 2 CDs by mistake)

3 89

Knowing your vehicle

7. RANDOM(RDM)

Press the RDM button to listen the tracks

in random, rather than sequential, order.

Press it again to cancel random play.

✽✽

NOTICE

• To assure proper operation of the unit,

keep the vehicle interior temperature

within a normal range by using the

vehicle's air conditioning or heating

system.

• When replacing the fuse, replace it

with a fuse having the correct capaci-

ty.

• All stored bookmarks are all erased

when the car battery is disconnected

or power to the vehicle is lost. If this

occurs, the bookmarks will have to be

reset.

• This equipment is designed to be used

only in a 12 volt DC battery system

with negative ground.

• This unit is made of precision parts.

Do not attempt to disassemble or

adjust any parts.

(Continued)

• When driving your vehicle, be sure to

keep the volume of the unit set low

enough to allow you to hear sounds

coming from the outside.

• Do not expose this equipment (includ-

ing the speakers and CD) to water or

excessive moisture.

CAUTION

• Do not insert warped or poor

quality discs into the CD player

as damage to the unit may occur.

• Do not insert anything like coins

into the player slot as damage to

the unit may occur.

• Do not place beverages close to

the audio system. The playback

mechanism may be damaged if

you spill them.

• Do not strike or allow anything to

impact the audio system, damage

to the system mechanisms could

occur.

• Off-road or rough surface driving

may cause the compact disc to

skip. Do not use the compact

disc when driving in such condi-

tions as damage to the compact

disc face could occur.

(Continued)

• Do not attempt to grab or pull the

compact disc out while the disc is

being pulled into the audio unit

by the self-loading mechanism.

Damage to the audio unit and

compact disc could occur.

• Avoid using recorded compact

discs in your audio unit. Original

compact discs are recommended.

Knowing your vehicle

903

AUDIO SYSTEM - STEREO RADIO OPERATION (M455) (IF EQUIPPED)

1. POWER ON-OFF, VOLUME Control Knob

2. Adjustment Mode

Select (AUDIO) Button

3. BAND Select Button

4. SCAN Button

5. EQ Button

6. AUTO SEEK Select Button

7. TUNE (Manual) Select Knob

8. PRESET STATION Select Buttons

JBM455NA

3 91

Knowing your vehicle

1. POWER ON-OFF Control Knob

• The radio unit may be operated when

the ignition key is in the “ACC” or “ON”

position. Press the button to switch the

power on. The display shows the radio

frequency in the radio mode, the tape

direction indicator in the tape mode or

CD/MP3 track in either the CD/MP3

mode. To switch the power off, press

the button again.

• Push the FM/AM, TAPE or CD/MP3 to

turn on that function without pushing

Power ON-OFF control knob.

VOLUME Control

Rotate the knob clockwise to increase

the volume and turn the knob counter-

clockwise to reduce the volume.

2. Adjustment Mode Select

(AUDIO) Button

Pressing the AUDIO button changes the

BASS, MIDDLE, TREBLE, FADER and

BALANCE mode.

The mode selected is shown on the dis-

play.

After selecting the desired mode, rotate

the mode select knob clockwise or coun-

terclockwise to adjust.

BASS Control

To increase the bass, rotate the knob

clockwise, to decrease the bass, rotate

the knob counterclockwise.

MID Control

To increase the MID, rotate the knob

clockwise, to decrease the MID, rotate

the knob counterclockwise.

TREBLE Control

To increase the TREBLE, rotate the knob

clockwise, to decrease the TREBLE,

rotate the knob counterclockwise.

FAD (Fader Control)

Turn the control knob clockwise to

emphasize rear speaker sound (front

speaker sound will be attenuated). When

the control knob is turned counterclock-

wise, front speaker sound will be empha-

sized (rear speaker sound will be attenu-

ated).

BALANCE Control

Rotate the knob clockwise to emphasize

right speaker sound. (Left speaker sound

will be attenuated) When the control

knob is turned counter clockwise, left

speaker sound will be emphasized (Right

speaker sound will be attenuated).

3. BAND Select Button

Pressing the FM/AM Button changes the

AM, FM1 and FM2 bands. The mode

selected is shown on the display.

4. SCAN Button

When you Press the button, frequency is

changed and the next channel is

received automatically.

To stay on a station, press the SCAN but-

ton again.

Knowing your vehicle

923

5. EQ Button

Press the EQ button to select the CLAS-

SIC, POPS, ROCK, JAZZ and OFF

MODE for the desired tone quality. Each

press of the button changes the display

as follows;

6. AUTO SEEK Select Button

(Automatic Channel Selection)

Press the AUTO SEEK select button.

When the side is pressed, the unit

will automatically tune to the next higher

frequency and when the side is

pressed, it will automatically tune to the

next lower frequency.

7. TUNE (Manual) Select Knob

Rotate the knob clockwise to increase

the frequency and turn the knob counter-

clockwise to reduce the frequency.

8. PRESET STATION Select

Buttons

Six (6) stations for AM, FM1 and FM2

respectively can be preset in the elec-

tronic memory circuit.

HOW TO PRESET STATIONS

Six AM and twelve FM1 stations may be

programmed into the memory of the

radio. Then, by simply pressing the band

select button and/or one of the six station

select buttons, you may recall any of

these stations instantly. To program the

stations, follow these steps:

• Press band selector to set the band for

AM, FM1 and FM2.

• Select the desired station to be stored

by seek or manual tuning.

• Determine the preset station select

button you wish to use to access that

station.

• Press the station select button for more

than two seconds. Beep sound will be

heard while depressing the button. You

should then release the button, and

proceed to program the next desired

station. A total of 18 stations can be

programmed by selecting one AM and

two FM station per button.

• When completed, any preset station

may be recalled by selecting AM, FM1

or FM2 band and the appropriate sta-

tion button.

CAUTION

• Do not place beverages close to

the audio system. The playback

mechanism may be damaged if

you spill them.

• Do not strike or allow anything to

impact the audio system, damage

to the system mechanisms could

occur.

CLASSIC➟POPS➟ROCK➟JAZZ➟OFF

3 93

Knowing your vehicle

AUDIO SYSTEM - CASSETTE TAPE PLAYER OPERATION (M455) (IF EQUIPPED)

1. TAPE PROGRAM Button

2. TAPE EJECT Button

3. AUTO MUSIC SEARCH (AMS) Button

4. FF/REW Button

5. REPEAT Button

6. DOLBY Button

7. EQ Button

JBM455NA

Knowing your vehicle

943

1. TAPE PROGRAM Button

• This allows you to play the reverse side

of the tape by merely depressing the

program button. An arrow will appear in

the display to show tape direction.

• Push the TAPE button to turn on that

function without pushing power

ON/OFF control knob.

2. TAPE EJECT Button

• When the button is pressed with a

cassette loaded, the cassette will eject.

• When the button is pressed during

FF/REW mode, the cassette will eject.

3. AUTO MUSIC SEARCH (AMS)

Button

Press the button to find the starting point

of each song in a prerecorded music

tape. The quiet space between songs

(must have at least 4 sec. gap) can be

identified by the AUTO MUSIC SEARCH

button.

• Pressing the button will play the

beginning of the next music segment.

• Pressing the button will start replay

at the beginning of the music just lis-

tened to.

4. FF/REW Button

• forward tape winding starts when the

FF button is pressed during PLAY or

REW mode.

• Tape PLAY starts when the FF button

is pressed again during FF mode.

• Tape rewinding starts when the REW

button is pressed during PLAY or FF

mode.

• Tape PLAY starts when the REW but-

ton pressed again during REW mode.

5. REPEAT Button

• To repeat the track you are currently

listening to, press the RPT button. To

cancel, press again.

• If you do not release RPT operation

when the track ends, it will automati-

cally be replayed.

This process will be continued until you

push the button again.

6. DOLBY Button

If you get background noise during tape

PLAY, you can reduce this considerably

by merely pressing the DOLBY button. If

you want to cancel the DOLBY feature,

press the button again.

7. EQ Button

Press the EQ button to select the CLAS-

SIC, POPS, ROCK, JAZZ and OFF

MODE for the desired tone quality. Each

press of the button changes the display

as follows;

CLASSIC➟POPS➟ROCK➟JAZZ➟OFF

3 95

Knowing your vehicle

✽✽

NOTICE

• To assure proper operation of the unit,

keep the vehicle interior temperature

within a normal range by using the

vehicle's air conditioning or heating

system.

• When replacing the fuse, replace it

with a fuse having the correct capaci-

ty.

• The preset station frequencies are all

erased when the car battery is discon-

nected. Therefore, all data will have to

be set again if this should occur.

• Do not add any oil to the rotating

parts. Keep magnets, screwdrivers

and other metallic objects away from

the tape mechanism and head.

• This equipment is designed to be used

only in a 12 volt DC battery system

with negative ground.

• This unit is made of precision parts.

Do not attempt to disassemble or

adjust any parts.

(Continued)

• When driving your vehicle, be sure to

keep the volume of the unit set low

enough to allow you to hear sounds

coming from the outside.

• Do not expose this equipment (includ-

ing the speakers and tape) to water or

excessive moisture.

CAUTION

• Do not insert anything like coins

into the player slot as damage to

the unit may occur.

• Do not place beverages close to

the audio system. The playback

mechanism may be damaged if

you spill them.

• Do not strike or allow anything to

impact the audio system, damage

to the system mechanisms could

occur.

Knowing your vehicle

963

AUDIO SYSTEM - COMPACT DISC PLAYER (M455) (IF EQUIPPED)

1. AUDIO/MP3 CD Select Button

2. TRACK UP/DOWN Button

3. FF/REW Button

4. REPEAT (RPT) Button

5. RANDOM (RDM) Button

6. BOOKMARK (MARK) Button

7. SCROLL Button

8. EQ Button

9. CD EJECT Button

10. SCAN Button

11. FILE SEARCH Knob

(TUNE Select Knob)

12. DIRECTORY SEARCH Button

JBM455NA

Compatible with MP3/WMA/AAC/WAVE

3 97

Knowing your vehicle

1. AUDIO/MP3 CD Select Button

• Insert the CD with the label facing

upward.

• Insert the CD to start CD playback,

during radio operation or cassette tape

playing.

• If you press the CD button while a disc

is in the CD deck, the CD player will

begin playing even if the radio or cas-

sette player is being used.

• The CD player can be used when the

ignition switch is in either the “ON” or

“ACC” position.

• Push the CD button to turn on that

function without pushing Power ON-

OFF control knob.

✽✽

NOTICE

• Do not stick paper or tape etc., on the

label side or the recording side of any

discs, as it may cause a malfunction.

• The unit can play a multi-session CD-

R (recordable CD) and CD-RW

(rewritable CD) that consists of more

than two sessions.

Please refer to the manual of CD-

R/CD-RW recorder or CD-R/CD-RW

software for more information on

finalization process.

(Continued)

• Depending on the recording status,

some CD-Rs/CD-RWs may not be

played on this unit.

✽

NOTICE

Playback of MP3, AAC and WMA file

formats are supported. Load to play

time for these formats may be longer

due to the compressed nature of these

discs.

2. TRACK UP/DOWN Button

• The desired track on the disc currently

being played can be selected using the

track number.

• Press button once to skip forward to

the beginning of the next track.

Press within a second after play-

back begins to quickly move backward

through a CD.

If you press after more than a sec-

ond, it will take you to the beginning of

the file you are now listening to.

3. FF/REW Button

If you want to fast forward or reverse

through the compact disc track, push and

hold the FF or REW button.

When you release the button, the com-

pact disc player will resume playing.

4. REPEAT (RPT) Button

• To repeat the track you are currently

listening to, press the RPT button. To

cancel, press it again.

• To repeat the music within selected

folder, press the RPT button for more

than 0.8 second. To cancel, press it

again. (MP3 CD only)

• If you do not release RPT operation

when the track ends, it will automati-

cally be replayed.

This process will be continued until you

push the button again or power

ON/OFF.

5. RANDOM (RDM) Button

• Press the RDM button to listen to

recorded tracks in random sequence.

Press RDM again to cancel or turn the

audio unit OFF then ON. The unit

defaults to playing tracks in sequential

order.

• To listen the music within the selected

folder in random order, press the RDM

button within a second. To cancel,

press it again or power ON/OFF.(MP3

CD only)

Knowing your vehicle

983

6. BOOKMARK (MARK) Button

When the CD player unit is operating, the

desired track on the disc can be book-

marked by using the MARK button.(MP3

CD only)

• Press the MARK button for more than

0.8 second to bookmark the desired

track.

“M” will be displayed on the LCD and

“MEMORY No.” will display for approxi-

mately five seconds.

To play a bookmarked track, press the

MARK button within 0.8 second and

select the bookmarked track to play.

• To erase a bookmarked track, press

the MARK button for more than 0.8

second. The unit will beep once when

the bookmark is erased.

7. SCROLL Button

When the CD is playing, you can scroll

through long file names by pressing the

DOLBY button for approximately one

second. The file name will appear on the

LCD for about three seconds.

8. EQ Button

Press the EQ button to select the CLAS-

SIC, POPS, ROCK, JAZZ and OFF

MODE for the desired tone quality. Each

press of the button changes the display

as follows;

9. CD EJECT Button

When the button is pressed with a CD

loaded, the CD will eject.

Forcing to eject : To force to eject a CD,

press this button for more than 3 sec-

onds.

(Do this only when a CD is jammed and

you can not eject it in the normal way -

e.g.) in case that you have inserted 2

CDs by mistake)

10. SCAN Button

• To playback the first 10 seconds of

each track, press the SCAN button

more than 0.8 second.

• To playback the first 10 seconds of

each track in the selected folder, press

the SCAN button within 0.8 second.

(MP3 CD only)

• Press the SCAN button again within 10

sec. when you have reached the

desired track.

11. FILE SEARCH Knob (TUNE

Select Knob)

• You can skip the track by turning the

FILE SEARCH knob clockwise or

counterclockwise.

After selecting the desired track, press

the FILE SEARCH knob to playback

the track.

If you do not press the FILE SEARCH

knob within five seconds, the search

will stop.

12. DIRECTORY SEARCH Button

• You can move through the folder by

pushing the DIR button to up and

down .

After moving the desired folder, press

the FILE SEARCH knob to playback

the selected folder.

If you do not press the FILE SEARCH

knob within five seconds, the search

will stop.

CLASSIC➟POPS➟ROCK➟JAZZ➟OFF

3 99

Knowing your vehicle

✽✽

NOTICE

• To assure proper operation of the unit,

keep the vehicle interior temperature

within a normal range by using the

vehicle's air conditioning or heating

system.

• When replacing the fuse, replace it

with a fuse having the correct capaci-

ty.

• All stored bookmarks are all erased

when the car battery is disconnected

or power to the vehicle is lost. If this

occurs, the bookmarks will have to be

reset.

• This equipment is designed to be used

only in a 12 volt DC battery system

with negative ground.

• This unit is made of precision parts.

Do not attempt to disassemble or

adjust any parts.

• When driving your vehicle, be sure to

keep the volume of the unit set low

enough to allow you to hear sounds

coming from the outside.

• Do not expose this equipment (includ-

ing the speakers and tape) to water or

excessive moisture.

CAUTION

• Do not insert warped or poor

quality discs into the CD player

as damage to the unit may occur.

• Do not insert anything like coins

into the player slot as damage to

the unit may occur.

• Do not place beverages close to

the audio system. The playback

mechanism may be damaged if

you spill them.

• Do not strike or allow anything to

impact the audio system, damage

to the system mechanisms could

occur.

• Off-road or rough surface driving

may cause the compact disc to

skip. Do not use the compact

disc when driving in such condi-

tions as damage to the compact

disc face could occur.

(Continued)

• Do not attempt to grab or pull the

compact disc out while the disc is

being pulled into the audio unit

by the self-loading mechanism.

Damage to the audio unit and

compact disc could occur.

• Avoid using recorded compact

discs in your audio unit. Original

compact discs are recommended.

Knowing your vehicle -> Audio system for Your Kia Rio 4 Door Second Generation (2006-2010)

Related Topics

Popular Owner Manuals

Latest Owner Manuals