2017-2023 Kia Rio 4 Door Features of your vehicle -> Lighting User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Features of your vehicle -> Lighting for Your Kia Rio 4 Door Third Generation (2017-2023)

Features of your vehicle  
LIGHTING  
Battery saver function  
Headlight escort function  
(if equipped)  
Headlight welcome function  
(if equipped)  
• The purpose of this feature is to  
prevent the battery from being dis-  
charged. The system automatically  
turns off the parking lights when  
the driver removes the ignition key  
and opens the driver-side door.  
The headlights (and/or taillights) will When the headlight switch is in the  
remain on for approximately 5 min- ON or AUTO position and all doors  
utes after the ignition key is removed (and liftgate) are closed and locked,  
or turned to the ACC or LOCK posi- if you press the door unlock button  
tion. However, if the driver’s door is on the transmitter, the headlights will  
opened and closed, the headlights come on for about 15 seconds.  
• With this feature, the parking lights  
will turn off automatically if the driv-  
er parks on the side of the road at  
night.  
are turned off after 15 seconds.  
If the headlight switch is in the AUTO  
The headlights can be turned off by position, the function can only oper-  
pressing the lock button on the trans- ate at night.  
mitter twice or turning off the light  
switch from the headlight or Auto  
unlock button again or door lock but-  
light position.  
If necessary, to keep the lights on  
when the ignition key is removed,  
perform the following:  
At this time, if you press the door  
ton on the transmitter, the headlights  
If the driver gets out of the vehicle will turn off immediately.  
through other doors (except driver's  
door), the battery saver function  
does not operate and the headlight  
escort function does not turn off  
automatically. Therefore, It causes  
the battery to be discharged. In this  
case, make sure to turn off the lamp  
before getting out of the vehicle.  
1) Open the driver-side door.  
2) Turn the parking lights OFF and  
ON again using the light switch  
on the steering column.  
If the headlights are not working  
properly have your vehicle inspected  
by an authorized Kia dealer.  
Don't attempt to inspect or replace  
the wiring yourself to prevent mal-  
function.  
4 78  
Features of your vehicle  
(1) OFF position  
Daytime running light  
(if equipped)  
Lighting control  
(2) Auto light position (if equipped)  
(3) Parking light position  
■ Type A  
The Daytime Running Lights (DRL)  
can make it easier for others to see  
the front of your vehicle during the  
day. DRL can be helpful in many dif-  
ferent driving conditions, and it is  
especially helpful after dawn and  
before sunset.  
(4) Headlight position  
The DRL system turns OFF when:  
1. The headlight switch is ON.  
2. The engine is OFF.  
OSC046400  
■ Type B  
3. The parking brake is engaged.  
OSC047414N  
The light switch has a Headlight and  
a Parking light position.  
To operate the lights, turn the knob at  
the end of the control lever to one of  
the following positions:  
4 79  
Features of your vehicle  
Auto light position (if equipped)  
Parking light position (  
)
Headlight position (  
)
■ Type A  
■ Type A  
■ Type A  
OSC047401N  
OSC047402N  
OSC047403N  
■ Type B  
■ Type B  
■ Type B  
OSC047415N  
OSC047416N  
OSC047417N  
When the light switch is in the park-  
ing light position (3rd position), the  
tail, position, license and instrument  
panel lights will turn ON.  
When the light switch is in the head-  
light position (4th position) the head, light position, the taillights and head-  
tail, position, license and instrument lights will turn ON or OFF automati-  
When the light switch is in the AUTO  
cally depending on the amount of  
light outside the vehicle.  
panel lights will turn ON.  
The ignition switch must be in the ON  
position to turn on the headlights.  
4 80  
Features of your vehicle  
To prevent the battery from being  
discharged, do not leave the lights  
on for a prolonged time while the  
engine is not running.  
High beam operation  
CAUTION  
■ Type A  
Never place anything over the  
sensor (1) located on the instru-  
ment panel.This will ensure bet-  
ter auto-light system control.  
WARNING - High beams  
Do not clean the sensor using a  
window cleaner, the cleaner may  
leave a light film which could  
interfere with sensor operation.  
Do not use high beam when  
there are other vehicles. Using  
high beam could obstruct the  
other driver's vision.  
If your vehicle has window tint  
or other types of metallic coat-  
ing on the front windshield, the  
Auto light system may not work  
properly.  
OSC047404N  
■ Type B  
OSC047418N  
To turn on the high beam headlights,  
push the lever away from you. Pull it  
back for normal (low beam) position.  
The high beam indicator light will illu-  
minate when the headlight high  
beams are switched on.  
4 81  
Features of your vehicle  
■ Type A  
They will self-cancel after a turn is  
completed. If the indicator continues  
to flash after a turn, manually return  
the lever to the OFF position.  
Turn signals and lane change  
signals  
■ Type A  
To signal a lane change, move the  
turn signal lever slightly and hold it in  
position (B). The lever will return to  
the OFF position when released.  
If an indicator stays on and does not  
flash or if it flashes abnormally, one of  
the turn signal bulbs may be burned  
out and will require replacement.  
OSC047405N  
■ Type B  
OSC047406N  
■ Type B  
OSC047419N  
To flash the headlights, pull the lever  
towards you. It will return to the normal  
(low-beam) position when released.  
The headlight switch does not need to  
be on to use this flashing feature.  
OSC047420N  
The ignition switch must be on for the  
turn signals to function. To turn on  
the turn signals, move the lever up or  
down (A). The green arrow indicators  
on the instrument panel indicate  
which turn signal is operating.  
4 82  
Features of your vehicle  
One-touch lane change function  
To activate a one-touch lane change  
function, move the turn signal lever  
slightly and then release it. The lane  
change signals will blink 3, 5 or 7  
times.  
You can choose one-touch lane  
change blinking function in “One  
touch turn signal” of “User setting”.  
Refer to “User setting” in chapter 4.  
(if equipped)  
✽
NOTICE  
If an indicator flash is abnormally  
quick or slow, the bulb may be  
burned out or have a poor electrical  
connection in the circuit.  
4 83  

Related Topics

Features of your vehicle
Keys Remote keyless entry (if equipped) Theft-alarm system (if equipped) Door locks Trunk (for 4 door) Liftgate (for 5 door) Windows Hood Fuel filler lid Sunroof (if equipped) Steering wheel Mirrors Instrument cluster LCD windows (if equipped) Warning and indicator lights Rear View Monitor system Wipers and washers Interior light Defroster Manual climate control system Automatic climate control system (if equipped) Windshield defrosting and defogging Storage compartment Interior features

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot