Get Your vehicle at a glance -> Interior overview Guide for Kia Sorento SUV Third Generation (2016-2020)

Safety features of your vehicle

Feature of Seat Leather

Front seat adjustment - manual

Forward and backward

CAUTION

• Leather is made from the outer

skin of an animal, which goes

through a special process to be

available for use. Since it is a nat-

ural substance, each part differs in

thickness or density.

• Belts with metallic acces-

sories, zippers or keys inside

the back pocket may damage

the seat fabric.

• Make sure not to wet the seat.

It may change the nature of

natural leather.

Wrinkles may appear as a natural

result of stretching and shrinking

depending on the temperature and

humidity.

• Jeans or clothes which could

bleach may contaminate the

surface of the seat covering

fabric.

• The seat is made of stretchable

material to improve comfort.

OUM034002

• The parts contacting the body are

curved and the side supporting

area is high which provides driving

comfort and stability.

✽

NOTICE

To move the seat forward or back-

ward:

Wrinkles or abrasions which appear

naturally from usage are not cov-

ered by warranty.

1. Pull the seat slide adjustment

lever up and hold it.

• Wrinkles may appear naturally

from usage. It is not a fault of the

product.

2. Slide the seat to the position you

desire.

3. Release the lever and make sure

the seat is locked in place.

Adjust the seat before driving, and

make sure the seat is locked securely

by trying to move forward and back-

ward without using the lever. If the

seat moves, it is not locked properly.

3 5

Safety features of your vehicle

Seatback angle

Seat height (if equipped)

Lumbar support (if equipped)

OUM034004

OUM034003

OUM034068

To recline the seatback:

To change the height of the seat, The lumbar support can be adjusted

push the lever upwards or down- by pressing the lumbar support

1. Lean forward slightly and lift up the

seatback recline lever.

wards.

switch on the side of the seat.

• To lower the seat cushion, push the 1. Press the front portion of the

2. Carefully lean back on the seat

and adjust the seatback of the

seat to the position you desire.

lever down several times.

switch to increase support, or the

rear portion of the switch, to

decrease support.

• To raise the seat cushion, pull the

lever up several times.

3. Release the lever and make sure

the seatback is locked in place.

(The lever MUST return to its orig-

inal position for the seatback to

lock.)

2. Release the switch once it reach-

es the desired position.

3 6

Safety features of your vehicle

Forward and backward

Front seat adjustment - power

(if equipped)

CAUTION - Power Seating

Do not operate two or more

power seat control switches at

the same time. Doing so may

damage the power seat motor or

electrical components.

The front seat can be adjusted by

using the control switches located on

the outside of the seat cushion.

Before driving, adjust the seat to the

proper position so you can easily con-

trol the steering wheel, pedals and

switches on the instrument panel.

When in operation, the power seat-

consumes a large amount of electri-

cal power. To prevent unnecessary

charging system drain, don’t adjust

the power seat longer than neces-

sary while the engine is not running.

WARNING - Unattended

children

OUM034006

Do not leave children unattend-

ed in the vehicle. Children might

operate features of the vehicle

that could injure them.

Push the control switch forward or

backward to move the seat to the

desired position. Release the switch

once the seat reaches the desired

position.

CAUTION - Power seat

adjustments

The power seating controls

function by electronic motor.

Excessive operation may cause

damage to the electrical equip-

ment.

3 7

Safety features of your vehicle

Cushion extension

(for driver's seat, if equipped)

Seatback angle

Seat height (if equipped)

OUM034007

OUM034008

OUM034072L

Push the control switch forward or Pull the front portion of the control

backward to move the seatback to switch up to raise or press down to

the desired angle. Release the lower the front part of the seat cush-

switch once the seat reaches the ion. Pull the rear portion of the con-

Press the front portion of the switch

to raise the cushion extension, or the

rear portion of the switch to lower it.

Release the switch once the cushion

extension reaches the desired posi-

tion.

desired position.

trol switch up to raise or press down

to lower the rear part of the seat

cushion. Release the switch once the

seat reaches the desired position.

3 8

Safety features of your vehicle

■

Type B

Lumbar support (for driver’s seat)

Driver position memory system

(if equipped, for power seat)

■

Type A

OUM034073L

Type B

OUM034068

1. Press the front portion of the

switch (1) to increase support, or

the rear portion of the switch (2),

to decrease support.

OUM034032

The lumbar support can be adjusted

by pressing the lumbar support

switch on the side of the seat.

A driver position memory system is

provided to store and recall the driv-

er seat and outside rearview mirror

position with a simple button opera-

tion. By saving the desired position

into the system memory, different

drivers can reposition the driver seat

based upon their driving preference.

If the battery is disconnected, the

desired seat position memory will

need to be re-saved.

2. Move the support position up and

down by pressing the switch (3) or

(4).

Type A

1. Press the front portion of the

switch to increase support, or the

rear portion of the switch, to

decrease support.

3. Release the switch once the seat

reaches the desired position.

2. Release the switch once it reach-

es the desired position.

3 9

Your vehicle at a glance -> Interior overview for Your Kia Sorento SUV Third Generation (2016-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals