2011-2016 Kia Sportage SUV Safety features of your vehicle User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety features of your vehicle for Your Kia Sportage SUV Third Generation (2011-2016)

Seats / 3-2  
Seat belts / 3-18  
Child restraint system / 3-33  
Air bag - advanced supplemental restraint system / 3-42  
Safety features of your vehicle  
3
Downloaded from manuals search engine  
Safety features of your vehicle  
SEATS  
Front seat  
(1) Forward and backward  
(2) Seatback angle  
(3) Seat cushion height (Driver’s seat)  
(4) Lumbar support (Driver’s seat)*  
(5) Seat heater*  
*
*
(6) Headrest  
Power seat  
*
2nd row seat  
(7) Seatback folding  
(8) Headrest  
(9) Armrest  
(10) Seat heater*  
Manual seat  
* if equipped  
*
*
OSL030001  
3 2  
Downloaded from manuals search engine  
Safety features of your vehicle  
(Continued)  
WARNING - Loose objects  
WARNING - Driver’s seat  
If a seat is reclined during an acci-  
dent, the occupant’s hips may slide  
under the lap portion of the seat  
belt applying great force to the  
unprotected abdomen. Serious or  
fatal internal injuries could result.  
The driver must advise the passen-  
ger to keep the seatback in an  
upright position whenever the vehi-  
cle is in motion. In addition, exces-  
sive reclining can significantly  
reduce the ability of the restraint  
system to restrain occupants in  
certain accidents, specifically  
rollover accidents.  
Loose objects in the driver’s foot  
area could interfere with the opera-  
tion of the foot pedals, possibly  
causing an accident. Do not place  
anything under the front seats.  
• Never attempt to adjust the seat  
while the vehicle is moving. This  
could result in loss of control,  
and an accident causing death,  
serious injury, or property dam-  
age.  
• Do not allow anything to interfere  
with the normal position of the  
seatback. Storing items against a  
seatback or in any other way  
interfering with proper locking of  
a seatback could result in serious  
or fatal injury in a sudden stop or  
collision.  
• Always drive and ride with your  
seatback upright and the lap por-  
tion of the seat belt snug and low  
across the hips. This is the best  
position to protect you in case of  
an accident.  
• In order to avoid unnecessary  
and perhaps severe air bag  
injuries, always sit as far back as  
possible from the steering wheel  
while maintaining comfortable  
control of the vehicle. We recom-  
mend that your chest be at least  
25 cm (10 inches) away from the  
steering wheel.  
WARNING - Uprighting  
seat  
When you return the seatback to its  
upright position, hold the seatback  
and return it slowly and be sure  
there are no other passengers  
around the seat. If the seatback is  
returned without being held and  
controlled, the back of the seat  
could spring forward resulting in  
accidental injury to a person struck  
by the seatback.  
WARNING  
Do not use a sitting cushion that  
reduces friction between the seat  
and passenger. The passenger’s  
hips may slide under the lap por-  
tion of the seat belt during an acci-  
dent or a sudden stop. Serious or  
fatal internal injuries could result  
because the seat belt cannot oper-  
ate normally.  
WARNING - Driver respon-  
sibility for passengers  
Riding in a vehicle with the seat-  
back reclined could lead to serious  
or fatal injury in an accident.  
(Continued)  
3 3  
Downloaded from manuals search engine  
Safety features of your vehicle  
(Continued)  
WARNING - Rear seatbacks  
WARNING  
• When resetting the seatback to  
the upright position, make sure it  
is securely latched by pushing it  
forward and backwards.  
• To avoid the possibility of burns,  
do not remove the carpet in the  
cargo area. Emission control  
devices beneath this floor gener-  
ate high temperatures.  
• The rear seatback must be  
securely latched. If not, passen-  
gers and objects could be thrown  
forward resulting in serious  
injury or death in the event of a  
sudden stop or collision.  
• Do not adjust the seat while wear-  
ing seat belts. Moving the seat  
cushion forward may cause  
strong pressure on the abdomen.  
• Use extreme caution so that  
hands or other objects are not  
caught in the seat mechanisms  
while the seat is moving.  
• Do not put a cigarette lighter on  
the floor or seat. When you oper-  
ate the seat, gas may gush out of  
the lighter and cause fire.  
• Luggage and other cargo should  
be laid flat in the cargo area. If  
objects are large, heavy, or must  
be piled, they must be secured.  
Under no circumstances should  
cargo be piled higher than the  
seatbacks. Failure to follow these  
warnings could result in serious  
injury or death in the event of a  
sudden stop, collision or rollover.  
• No passenger should ride in the  
cargo area or sit or lie on folded  
seatbacks while the vehicle is  
moving. All passengers must be  
properly seated in seats and  
restrained properly while riding.  
WARNING  
After adjusting the seat, always  
check that it is securely locked into  
place by attempting to move the  
seat forward or backward without  
using the lock release lever.  
Sudden or unexpected movement  
of the driver's seat could cause you  
to lose control of the vehicle result-  
ing in an accident.  
(Continued)  
3 4  
Downloaded from manuals search engine  
Safety features of your vehicle  
OSL030002  
OSL030003  
OSL030004  
C010102AHM  
C010103APB  
Front seat adjustment - manual  
C010101AHM  
Seatback angle  
To recline the seatback:  
1. Lean forward slightly and lift up the  
seatback recline lever.  
2. Carefully lean back on the seat and  
adjust the seatback of the seat to the  
position you desire.  
3. Release the lever and make sure the  
seatback is locked in place. (The lever  
MUST return to its original position for  
the seatback to lock.)  
Seat height (for driver’s seat)  
To change the height of the seat, push  
the lever upwards or downwards.  
To lower the seat cushion, push the  
lever down several times.  
To raise the seat cushion, pull the lever  
up several times.  
Forward and backward  
To move the seat forward or backward:  
1. Pull the seat slide adjustment lever up  
and hold it.  
2. Slide the seat to the position you  
desire.  
3. Release the lever and make sure the  
seat is locked in place.  
Adjust the seat before driving, and make  
sure the seat is locked securely by trying  
to move forward and backward without  
using the lever. If the seat moves, it is not  
locked properly.  
3 5  
Downloaded from manuals search engine  
Safety features of your vehicle  
Front seat adjustment - power  
(if equipped)  
CAUTION  
• The power seat is driven by an  
electric motor. Stop operating  
once the adjustment is complet-  
ed. Excessive operation may  
damage the electrical equipment.  
The front seat can be adjusted by using  
the control switches located on the out-  
side of the seat cushion. Before driving,  
adjust the seat to the proper position so  
you can easily control the steering wheel,  
pedals and switches on the instrument  
panel.  
• When in operation, the power  
seat consumes a large amount of  
electrical power. To prevent  
unnecessary charging system  
drain, don’t adjust the power seat  
longer than necessary while the  
engine is not running.  
WARNING  
The power seat is operable with the  
ignition OFF.  
OSL030006  
Forward and backward  
• Do not operate two or more power  
seat control switches at the same  
time. Doing so may result in  
power seat motor or electrical  
component malfunction.  
Therefore, children should never be  
left unattended in the vehicle.  
Push the control switch forward or back-  
ward to move the seat to the desired  
position. Release the switch once the  
seat reaches the desired position.  
3 6  
Downloaded from manuals search engine  
Safety features of your vehicle  
Type A  
OSL030063E  
Type B  
OSL030007  
OSL030008  
Seatback angle  
Seat height (for driver’s seat)  
Push the control switch forward or back-  
ward to move the seatback to the desired  
angle. Release the switch once the seat  
reaches the desired position.  
Pull the rear portion of the control switch  
up to raise or press down to lower the  
seat cushion. Release the switch once  
the seat reaches the desired position.  
OSL030009  
Lumbar support (for driver’s seat)  
The lumbar support can be adjusted by  
pressing the button.  
3 7  
Downloaded from manuals search engine  
Safety features of your vehicle  
WARNING  
• For maximum effectiveness in  
case of an accident, the headrest  
should be adjusted so the middle  
of the headrest is at the same  
height of the center of gravity of  
an occupant's head. Generally,  
the center of gravity of most peo-  
ple's head is similar with the  
height of the top of their eyes.  
Also, adjust the headrest as close  
to your head as possible. For this  
reason, the use of a cushion that  
holds the body away from the  
seatback is not recommended.  
• Do not operate the vehicle with  
the headrests removed. Severe  
injury to the occupants may  
occur in the event of an accident.  
Headrests may provide protec-  
tion against neck injuries when  
properly adjusted.  
OLM039303N  
OSL030011  
C010104AHM  
Adjusting the height up and down  
Front headrest  
To raise the headrest, pull it up to the  
desired position (1). To lower the head-  
rest, push and hold the release button (2)  
on the headrest support and lower the  
headrest to the desired position (3).  
The driver's and front passenger's seats  
are equipped with a headrest for the  
occupant's safety and comfort.  
The headrest not only provides comfort  
for the driver and front passenger, but  
also helps protect the head and neck in  
the event of a rear collision.  
• Do not adjust the headrest posi-  
tion of the driver’s seat while the  
vehicle is in motion.  
3 8  
Downloaded from manuals search engine  
Safety features of your vehicle  
OSL032010A  
HNF2041-1  
OSL030012  
Forward and backward adjustment  
(if equipped)  
Removal  
Active headrest (if equipped)  
To remove the headrest, raise it as far as  
it can go then press the release button  
(1) while pulling the headrest up (2).  
To reinstall the headrest, put the head-  
rest poles (3) into the holes while press-  
ing the release button (1). Then adjust it  
to the appropriate height.  
The active headrest is designed to move  
forward and upward during a rear impact.  
This helps prevent the driver's and front  
passenger’s heads from moving back-  
ward and thus helps minimize neck  
injuries.  
If there is any problem with the active  
headrest, take your vehicle to an author-  
ized Kia dealer and have the system  
checked.  
The headrest may be adjusted forward to  
several different positions by pulling the  
headrest foward and upward at 30 to 45  
degrees.  
To adjust the headrest to it's furthest  
backward position, pull it fully forward to  
the farthest position and release it.  
Adjust the headrest so that it properly  
supports the head and neck.  
WARNING  
Make sure the headrest locks in  
position after adjusting it to proper-  
ly protect the occupants.  
WARNING  
CAUTION  
Excessive pulling or pushing may  
damage the headrest.  
A gap between the seat and the  
headrest release button may  
appear when seating on the seat or  
when you push or pull the seat. Be  
careful not to get your finger, etc.  
caught in the gap.  
3 9  
Downloaded from manuals search engine  
Safety features of your vehicle  
• The seat heater defaults to the OFF  
position whenever the ignition switch is  
turned on.  
NOTICE  
With the seat heater switch in the ON  
position, the heating system in the seat  
turns off or on automatically depending  
on the seat temperature.  
OSL030013  
OSL030016  
C010107AUN  
Type B (with air ventilation, if equipped)  
Front seat heater (if equipped)  
- Driver’s seat only  
The temperature setting of the seat  
changes according to the switch position.  
• If you want to warm your seat cushion,  
press the front portion of the switch  
(yellow color).  
• If you want to cool your seat cushion,  
press the rear portion of the switch  
(blue color).  
• Each time you press the button, the  
temperature setting or airflow will  
change as follows:  
Type A  
The seat heater is provided to warm the  
front seats during cold weather. With the  
ignition switch in the ON position, push  
either of the switches to warm the driver's  
seat or the front passenger's seat.  
During mild weather or under conditions  
where the operation of the seat heater is  
not needed, keep the switches in the  
OFF position.  
• Each time you push the button, the  
temperature setting of the seat will  
change as follows :  
OFF  
HIGH(  
)
LOW(  
)
OFF  
HIGH(  
)
LOW(  
)
3 10  
Downloaded from manuals search engine  
Safety features of your vehicle  
• The seat heater (with air ventilation)  
defaults to the OFF position whenever  
the ignition switch is turned on.  
WARNING - Seat heater  
burns  
Passengers should use extreme  
caution when using seat heaters  
due to the possibility of excess  
heating or burns. The seat heater  
may cause burns even at low tem-  
peratures, especially if used for  
long periods of time. In particular,  
the driver must exercise extreme  
care for the following types of pas-  
sengers:  
1. Infants, children, elderly or hand-  
icapped persons, or hospital out-  
patients  
2. Persons with sensitive skin or  
those that burn easily  
3. Fatigued individuals  
4. Intoxicated individuals  
5. Individuals taking medication  
that can cause drowsiness or  
sleepiness (sleeping pills, cold  
tablets, etc.)  
CAUTION  
• When cleaning the seats, do not  
use an organic solvent such as  
thinner, benzene, alcohol and  
gasoline. Doing so may damage  
the surface of the heater or seats.  
• To prevent overheating the seat  
heater, do not place anything on  
the seats that insulates against  
heat, such as blankets, cushions  
or seat covers while the seat  
heater is in operation.  
• Do not place heavy or sharp  
objects on seats equipped with  
seat warmers. Damage to the seat  
warming components could occur.  
OCM030052  
C010108AAM  
Seatback pocket (if equipped)  
WARNING - Seatback  
pockets  
Do not put heavy or sharp objects  
in the seatback pockets. In an acci-  
dent they could come loose from  
the pocket and injure vehicle occu-  
pants.  
3 11  
Downloaded from manuals search engine  
Safety features of your vehicle  
WARNING  
WARNING - Cargo  
WARNING  
For proper operation of the  
Occupant Detection System (ODS):  
Cargo should always be secured to  
prevent it from being thrown about  
the vehicle in a collision and caus-  
ing injury to the vehicle occupants.  
Do not place objects on the rear  
seats, since they cannot be proper-  
ly secured and may hit the front  
seat occupants in a collision.  
The purpose of the fold-down rear  
seatbacks is to allow you to carry  
longer objects that could not be  
accommodated in the cargo area.  
• Do not place any items cumula-  
tively weighing over 1 kg (2.2 lbs)  
in the seatback pocket or on the  
front passenger seat.  
• Do not hanging clothing or other  
articles on the front passenger  
seat.  
Never allow passengers sit on top  
of the folded down seatback while  
the vehicle is moving. This is not a  
proper seating position and no seat  
belts are available for use.  
Ignoring this warning could result  
in serious injury or death in case of  
an accident or sudden stop.  
Objects carried on the folded down  
seatback should not extend higher  
than the top of the front seatbacks.  
Doing this could allow cargo to  
slide forward and cause injury or  
damage during sudden stops.  
Rear seat adjustment  
Folding the rear seat  
The rear seatbacks can be folded to facil-  
itate carrying long items or to increase  
the luggage capacity of the vehicle.  
1. Insert the rear seat belt buckle in the  
pocket (if equipped) between the rear  
seatback and cushion, and insert the  
rear seat belt webbing into the guide to  
prevent the seat belt from being dam-  
aged.  
2. Set the front seatback to the upright  
position and if necessary, slide the  
front seat forward.  
3.Lower the rear headrests to the lowest  
position.  
3 12  
Downloaded from manuals search engine  
Safety features of your vehicle  
At the front  
WARNING  
When you return the rear seatback  
to its upright position after being  
folded down:  
Be careful not to damage the seat  
belt webbing or buckle. Do not  
allow the seat belt webbing or  
buckle to get caught or pinched in  
the rear seat. Ensure that the seat-  
back is completely locked into its  
upright position by pushing on the  
top of the seatback. Otherwise, in  
an accident or sudden stop, the  
seat could fold down and allow  
cargo to enter the passenger com-  
partment, which could result in  
serious injury or death.  
OSL030021  
At the rear (if equipped)  
OSL030022  
5.When you return the seatback to its  
upright position, always be sure it has  
locked into position by pushing on the  
top of the seatback.  
6. Return the rear seat belt to the proper  
position.  
OSL030052  
4.Pull on the seatback folding lever, then  
fold the seat toward the front of the  
vehicle.  
3 13  
Downloaded from manuals search engine  
Safety features of your vehicle  
CAUTION - Damaging rear  
seat belt buckles  
WARNING - Uprighting  
seat  
WARNING - Cargo  
Cargo should always be secured to  
prevent it from being thrown about  
the vehicle in a collision and caus-  
ing injury to the vehicle occupants.  
Do not place objects on the rear  
seats, since they cannot be proper-  
ly secured and may hit the front  
seat occupants in a collision.  
When you fold the rear seatback,  
insert the buckle in the pocket  
between the rear seatback and  
cushion. Doing so can prevent the  
buckle from being damaged by the  
rear seatback.  
When you return the seatback to its  
upright position, hold the seatback  
and return it slowly and be sure  
there are no other occupants  
around the seat. If the seatback is  
returned without being held and  
controlled, the back of the seat  
could move forward or backward  
resulting in accidental injury to a  
person struck by the seatback.  
CAUTION - Rear seat belts  
When returning the rear seatbacks  
to the upright position, remember  
to return the rear shoulder belts to  
their proper position. Routing the  
seat belt webbing through the rear  
seat belt guides will help keep the  
belts from being trapped behind or  
under the seats.  
WARNING - Cargo loading  
Make sure the engine is off, the  
automatic transaxle is in P (Park) or  
the manual transaxle is in 1st, and  
the parking brake is securely  
applied whenever loading or  
unloading cargo. Failure to take  
these steps may allow the vehicle  
to move if the shift lever is inadver-  
tently moved to another position.  
3 14  
Downloaded from manuals search engine  
Safety features of your vehicle  
WARNING  
• For maximum effectiveness in  
case of an accident, the rear seat  
headrest should be adjusted so  
the middle of the headrest is at  
the same height of the center of  
gravity of an occupant's head.  
Generally, the center of gravity of  
most people's head is level to the  
height of the top of their eyes.  
• Also adjust the headrest as close  
to your head as possible. For this  
reason, the use of a cushion that  
holds the body away from the  
seatback is not recommended.  
• Do not operate the vehicle with  
the headrests removed. Severe  
injury to an occupant may occur  
in the event of an accident.  
Headrests may provide protec-  
tion against severe neck injuries  
when properly adjusted.  
OLM039304N  
OSL030017  
Adjusting the height up and down  
C010303AHM  
To raise the headrest, push and hold the  
release button (1) while pulling it up to  
the desired position (2). To lower the  
headrest, push and hold the release but-  
ton (1) on the headrest support and  
lower the headrest to the desired position  
(3).  
Headrest  
The rear seat(s) is equipped with head-  
rests in all the seating positions for the  
occupant's safety and comfort.  
The headrest not only provides comfort  
for passengers, but also helps protect the  
head and neck in the event of a collision.  
• After adjusting or reinstalling the  
headrest, always make sure the  
headrest locks in the upright  
position to properly protect the  
occupants.  
3 15  
Downloaded from manuals search engine  
Safety features of your vehicle  
OSL030018  
OSL030019  
OSL030020  
Removal  
Rear seat armrest  
Rear seat heater (if equipped)  
To remove the headrest, raise it as far as  
it can go then press the release button  
(1) while pulling the headrest up (2).  
To reinstall the headrest, put the head-  
rest poles (3) into the holes while press-  
ing the release button (1). Then adjust it  
to the appropriate height.  
To use the armrest, pull it forward from  
the seatback.  
The seat heater is provided to warm the  
rear seats during cold weather. With the  
ignition switch in the ON position, push  
either of the switches to warm rear seats.  
During mild weather or under conditions  
where the operation of the seat heater is  
not needed, keep the switches in the  
"OFF" position.  
NOTICE  
With the seat heater switch in ON posi-  
tion, the heating system in the seat turns  
off or on automatically depending on the  
seat temperature.  
3 16  
Downloaded from manuals search engine  
Safety features of your vehicle  
CAUTION  
WARNING - Seat heater  
burns  
• When cleaning the seats, do not  
use an organic solvent such as  
thinner, benzene, alcohol and  
gasoline. Doing so may damage  
the surface of the heater or seats.  
Passengers should use extreme  
caution when using seat heaters  
due to the possibility of excess  
heating or burns. The seat heater  
may cause burns even at low tem-  
peratures, especially if used for  
long periods of time. In particular,  
the driver must exercise extreme  
care for the following types of pas-  
sengers:  
• To prevent overheating the seat  
heater, do not place anything on  
the seats that insulates against  
heat, such as blankets, cushions  
or seat covers while the seat  
heater is in operation.  
• Do not place heavy or sharp  
objects on seats equipped with  
seat warmers. Damage to the seat  
warming components could occur.  
1. Infants, children, elderly or hand-  
icapped persons, or hospital out-  
patients  
2. Persons with sensitive skin or  
those that burn easily  
3. Fatigued individuals  
4. Intoxicated individuals  
5. Individuals taking medication  
that can cause drowsiness or  
sleepiness (sleeping pills, cold  
tablets, etc.)  
3 17  
Downloaded from manuals search engine  
Safety features of your vehicle  
SEAT BELTS  
C020100AHM  
(Continued)  
(Continued)  
Seat belt restraint system  
• Avoid wearing twisted seat belts.  
A twisted belt can't do its job  
well. In a collision, it could even  
cut into you. Be sure the belt  
webbing is straight and not twist-  
ed.  
• Be careful not to damage the belt  
webbing or hardware. If the belt  
webbing or hardware is dam-  
aged, replace it.  
Care should be taken to avoid con-  
tamination of the webbing with pol-  
ishes, oils and chemicals, and par-  
ticularly battery acid. Cleaning may  
safely be carried out using mild  
soap and water. The belt should be  
replaced if webbing becomes  
frayed, contaminated or damaged.  
It is essential to replace the entire  
assembly after it has been worn in  
a severe impact even if damage to  
the assembly is not obvious. Belts  
should not be worn with straps  
twisted. Each belt assembly must  
only be used by one occupant; it is  
dangerous to put a belt around a  
child being carried on the occu-  
pant's lap.  
WARNING  
• For maximum restraint system  
protection, the seat belts must  
always be used whenever the  
vehicle is moving.  
• Seat belts are most effective  
when seatbacks are in the  
upright position.  
• Children age 12 and under must  
always be properly restrained in  
the rear seat. Never allow chil-  
dren to ride in the front passen-  
ger seat. If a child over 12 must  
be seated in the front seat, he/she  
must be properly belted and the  
seat should be moved as far back  
as possible.  
• Never wear the shoulder belt  
under your arm or behind your  
back. An improperly positioned  
shoulder belt can cause serious  
injuries in a crash. The shoulder  
belt should be positioned midway  
over your shoulder across your  
collarbone.  
WARNING  
Seat belts are designed to bear  
upon the bony structure of the  
body, and should be worn low  
across the front of the pelvis or the  
pelvis, chest and shoulders, as  
applicable; wearing the lap section  
of the belt across the abdominal  
area must be avoided.  
Seat belts should be adjusted as  
firmly as possible, consistent with  
comfort, to provide the protection  
for which they have been designed.  
A slack belt will greatly reduce the  
protection afforded to the wearer.  
(Continued)  
(Continued)  
3 18  
Downloaded from manuals search engine  
Safety features of your vehicle  
If the driver's seat belt is disconnected  
after the ignition switch is turned to the  
ON position, the seat belt warning light  
and chime will operate for approximately  
6 seconds. But if it is fastened within the  
6 seconds, the warning light and chime  
will turn off immediately. If the driver's  
seat belt is not fastened when the vehicle  
speed exceeds 10 km/h (6 mph), the  
seat belt warning light and chime will  
operate for approximately 11 times with a  
pattern of 6 seconds on and 24 seconds  
off until the belt is fastened or the vehicle  
speed decreases below 5 km/h (3 mph).  
WARNING  
• No modifications or additions  
should be made by the user  
which will either prevent the seat  
belt adjusting devices from oper-  
ating to remove slack, or prevent  
the seat belt assembly from being  
adjusted to remove slack.  
• When you fasten the seat belt, be  
careful not to latch the seat belt  
in buckles of other seat. It's very  
dangerous and you may not be  
protected by the seat belt proper-  
ly.  
1GQA2083  
C020101AAM-EU  
Seat belt warning (for driver’s seat)  
• Do not unfasten the seat belt and  
do not fasten and unfasten the  
seat belt repeatedly while driving.  
This could result in loss of con-  
trol, and an accident causing  
death, serious injury, or property  
damage.  
• When fastening the seat belt,  
make sure that the seat belt does  
not pass over objects that are  
hard or can break easily.  
As a reminder to the driver, the seat belt  
warning light will blink for approximately  
6 seconds each time you turn the ignition  
switch ON regardless of belt fastening.  
If the driver's seat belt is not fastened  
when the ignition switch is turned on, the  
seat belt warning light and the seat belt  
warning chime will operate for approxi-  
mately 6 seconds. But if it is fastened  
within the 6 seconds, the warning light  
will blink until the 6 seconds are up. The  
warning chime will turn off immediately.  
• Make sure there is nothing in the  
buckle. The seat belt may not be  
fastened securely.  
3 19  
Downloaded from manuals search engine  
Safety features of your vehicle  
NOTICE  
If you are not able to pull out the seat  
belt from the retractor, firmly pull the  
belt out and release it. Then you will be  
able to pull the belt out smoothly.  
OSL030062N  
B180A01NF-1  
C020102AAM-EU  
Seat belt warning  
(for front passenger’s seat)  
Seat belt - Driver's 3-point system  
with emergency locking retractor  
To fasten your seat belt:  
As a reminder to the front passenger, the  
front passenger's seat belt warning light  
will blink for approximately 6 seconds  
each time you turn the ignition switch ON  
regardless of belt fastening. If the pas-  
senger's seat belt is unfastened when  
the vehicle speed exceeds 10 km/h (6  
mph), the passenger's seat belt warning  
light will blink for at least 6 seconds until  
the belt is fastened.  
To fasten your seat belt, pull it out of the  
retractor and insert the metal tab (1) into  
the buckle (2). There will be an audible  
"click" when the tab locks into the buckle.  
The seat belt automatically adjusts to the  
proper length only after the lap belt por-  
tion is adjusted manually so that it fits  
snugly around your hips. If you lean for-  
ward in a slow, easy motion, the belt will  
extend and let you move around. If there  
is a sudden stop or impact, however, the  
belt will lock into position. It will also lock  
if you try to lean forward too quickly.  
3 20  
Downloaded from manuals search engine  
Safety features of your vehicle  
Front seat  
To adjust the height of the seat belt  
anchor, lower or raise the height adjuster  
into an appropriate position.  
To raise the height adjuster, pull it up (1).  
To lower it, push it down (3) while press-  
ing the height adjuster button (2).  
Release the button to lock the anchor  
into position. Try sliding the height  
adjuster to make sure that it has locked  
into position.  
WARNING  
OXM039026  
B200A02NF  
• Verify that the shoulder belt  
anchor is locked into position at  
the appropriate height. Never  
position the shoulder belt across  
your neck or face. Improperly  
positioned seat belts can cause  
serious injuries in an accident.  
• Failure to replace seat belts after  
an accident could leave you with  
damaged seat belts that will not  
provide protection in the event of  
another collision leading to per-  
sonal injury or death. Replace  
your seat belts after being in an  
accident as soon as possible.  
Height adjustment  
You can adjust the height of the shoulder  
belt anchor to one of the 4 positions for  
maximum comfort and safety.  
The height of the adjusting seat belt  
should not be too close to your neck. The  
shoulder portion should be adjusted so  
that it lies across your chest and midway  
over your shoulder near the door and not  
your neck.  
WARNING  
You should place the lap belt por-  
tion as low as possible and snugly  
across your hips, not on your waist.  
If the lap belt is located too high on  
your waist, it may increase the  
chance of injury in the event of a  
collision. Both arms should not be  
under or over the belt. Rather, one  
should be over and the other under,  
as shown in the illustration.  
Never wear the seat belt under the  
arm that is near the door.  
3 21  
Downloaded from manuals search engine  
Safety features of your vehicle  
C020106AUN  
When the seat belt is fully extended from  
the retractor to allow the installation of a  
child restraint system, the seat belt oper-  
ation changes to allow the belt to retract,  
but not to extend (Automatic Locking  
Retractor Type). Refer to “Using a child  
restraint system” in this section.  
CAUTION  
Seat belts - Front passenger and rear  
seat 3-point system with combination  
locking retractor  
Do NOT fold down the left portion of  
the rear seat back when the rear  
center seat belt is buckled. ALWAYS  
UNBUCKLE the rear center seat  
belt before folding down the left  
portion of the rear seat back. If the  
rear center seat belt is buckled  
when the left portion of the rear  
seat back is folded down, distortion  
and damage to the top portion of  
the seat back and seat belt garnish  
may result, causing the seat back to  
lock into the folded down position.  
To fasten your seat belt:  
Combination retractor type seat belts are  
installed in the rear seat positions to help  
accommodate the installation of child  
restraint systems. Although a combina-  
tion retractor is also installed in the front  
passenger seat position, it is strongly  
recommended that children always be  
seated in the rear seat. NEVER place  
any infant restraint system in the front  
seat of the vehicle.  
This type of seat belt combines the fea-  
tures of both an emergency locking  
retractor seat belt and an automatic lock-  
ing retractor seat belt.To fasten your seat  
belt, pull it out of the retractor and insert  
the metal tab into the buckle. There will  
be an audible "click" when the tab locks  
into the buckle. When not securing a  
child restraint, the seat belt operates in  
the same way as the driver's seat belt  
(Emergency Locking Retractor Type). It  
automatically adjusts to the proper length  
only after the lap belt portion of the seat  
belt is adjusted manually so that it fits  
snugly around your hips.  
NOTICE  
Although the combination retractor  
provides the same level of protection for  
seated passengers in either emergency  
or automatic locking modes, have the  
seated passengers use the emergency  
locking feature for improved conven-  
ience. The automatic locking function is  
intended to facilitate child restraint  
installation. To convert from the auto-  
matic locking feature to the emergency  
locking operation mode, allow the  
unbuckled seat belt to fully retract.  
3 22  
Downloaded from manuals search engine  
Safety features of your vehicle  
1KMN3441  
1KMN3442  
1KMB3443  
3 Point rear center belt  
To fasten the rear center belt  
1. Extract the tongue plate from the hole  
on the belt assembly cover and slowly  
pull the tongue plates out from the  
retractor.  
2. Insert the tongue plate (A) into the  
open end of the buckle (C) until an  
audible “click" is heard, indicating the  
latch is locked. Make sure the belt is  
not twisted.  
3. Pull the webbing and insert the tongue  
plate (B) into the open end of the buck-  
le (D) until an audible “click” is heard,  
indicating the latch is locked. Make  
sure the belt is not twisted.  
CAUTION  
When using the rear center seat  
belt, the buckle with the “CENTER”  
mark must be used.  
CAUTION - Cargo  
Be sure that the cargo is securely  
loaded in the rear cargo area. Doing  
not so may damage the rear center  
safety belt in sudden stop or certain  
collisions.  
3 23  
Downloaded from manuals search engine  
Safety features of your vehicle  
There will be an audible “click” when the  
tab locks in the buckle. The seat belt  
automatically adjusts to the proper length  
only after the lap belt is adjusted manu-  
ally so that it fits snugly around your hips,  
if you lean forward in a slow, easy  
motion, the belt will extend and let you  
move around. If there is a sudden stop or  
impact, the belt will lock into position. It  
will also lock if you try to lean forward too  
quickly.  
1KMB3451  
OSL030063N  
WARNING  
To unfasten the rear center belt  
2.To retract the rear center seatbelt,  
insert the tongue plate or similar small  
rigid device into the web release hole  
(C). Pull up on the seat belt web (A)  
and allow the webbing to retract auto-  
matically.  
When using the rear seat center  
belt, you must lock all tongue  
plates and buckles. If any tongue  
plate or buckle is not locked, it will  
increase the chance of injury in the  
event of collision.  
1.Press the release button on the buckle  
(D) and remove the tongue plate (B)  
from the buckle (D).  
3 24  
Downloaded from manuals search engine  
Safety features of your vehicle  
1KMN3453  
OSL030024  
OLM039031  
C020105AAM  
The actual feature may differ from the illus-  
tration.  
3.Insert the tongue plate into the hole on  
the belt assembly cover.  
Routing the seat belt webbing through  
the rear seat belt guides will help keep  
the belts from being trapped behind or  
under the seats.  
After inserting the seat belt, tighten the  
belt webbing by pulling it up.  
Stowing the rear seat belt  
The rear seat belt buckles can be stowed  
in the pocket between the rear seatback  
and cushion when not in use.  
CAUTION  
Remove the seat belt from the  
guides before using. If you pull on  
the seat belt when it is stored in the  
guides, it may damage the guides  
and/or belt webbing.  
3 25  
Downloaded from manuals search engine  
Safety features of your vehicle  
When the vehicle stops suddenly, or if  
the occupant tries to lean forward too  
quickly, the seat belt retractor will lock  
into position. In certain frontal collisions  
(or side collisions or rollovers), the pre-  
tensioner will activate and pull the seat  
belt into tighter contact against the occu-  
pant's body.  
If the system senses excessive seat belt  
tension on the driver or passenger's seat  
belt when the pre-tensioner activates, the  
load limiter inside the pre-tensioner will  
release some of the pressure on the  
affected seat belt.  
NOTICE  
The pre-tensioner will activate not only  
in a frontal collision but also in a side  
collision or rollover, if the vehicle is  
equipped with a side or curtain air bag.  
WARNING  
For your safety, be sure that the  
belt webbing is not loose or twisted  
and always sit properly on your  
seat.  
OED030300  
C020200BHM-EU  
Pre-tensioner seat belt  
Your vehicle is equipped with driver's and  
front passenger's pre-tensioner seat  
belts. The purpose of the pre-tensioner is  
to make sure that the seat belts fit tightly  
against the occupant's body in certain  
frontal collisions (or side collisions or  
rollovers). The pre-tensioner seat belts  
can be activated in certain frontal colli-  
sions as well as certain side impacts and  
rollover accidents, where the frontal colli-  
sion (or side collisions or rollovers) is  
severe enough, together with the air  
bags.  
3 26  
Downloaded from manuals search engine  
Safety features of your vehicle  
NOTICE  
WARNING  
To obtain maximum benefit from a  
pre-tensioner seat belt:  
• Both the driver's and front passen-  
ger's pre-tensioner seat belts may be  
activated in certain collisions.  
1. The seat belt must be worn cor-  
rectly and adjusted to the proper  
position. Please read and follow  
all of the important information  
and precautions about your vehi-  
cle’s occupant safety features –  
including seat belts and air bags –  
that are provided in this manual.  
The pre-tensioners will not be activat-  
ed if the seat belts are not being worn  
at the time of the collision.  
• When the pre-tensioner seat belts are  
activated, a loud noise may be heard  
and fine dust, which may appear to be  
smoke, may be visible in the passenger  
compartment. These are normal oper-  
ating conditions and are not haz-  
ardous.  
• Although it is non-toxic, the fine dust  
may cause skin irritation and should  
not be breathed for prolonged peri-  
ods. Wash all exposed skin areas thor-  
oughly after an accident in which the  
pre-tensioner seat belts were activat-  
ed.  
8KMB3311/Q  
2. Be sure you and your passen-  
gers always wear seat belts prop-  
erly.  
The seat belt pre-tensioner system con-  
sists mainly of the following components.  
Their locations are shown in the illustra-  
tion:  
1. SRS air bag warning light  
2. Retractor pre-tensioner assembly  
3. Front anchor pre-tensioner  
4. SRS control module  
3 27  
Downloaded from manuals search engine  
Safety features of your vehicle  
NOTICE  
(Continued)  
WARNING  
Because the sensor that activates the  
SRS air bag is connected with the pre-  
tensioner seat belt, the SRS air bag  
warning light ( ) on the instrument  
panel will illuminate for approximately  
6 seconds after the ignition switch has  
been turned to the ON position, and  
then it should turn off.  
• Improper handling of the pre-ten-  
sioner seat belt assemblies, and  
failure to heed the warnings not  
to strike, modify, inspect, replace,  
service or repair the pre-tension-  
er seat belt assemblies may lead  
to improper operation or inadver-  
tent activation and serious injury.  
• Always wear the seat belts when  
driving or riding in a motor vehi-  
cle.  
• If the vehicle or pre-tensioner  
seat belt must be discarded, con-  
tact an authorized Kia dealer.  
• Pre-tensioners are designed to  
operate only one time. After acti-  
vation, pre-tensioner seat belts  
must be replaced. All seat belts,  
of any type, should always be  
replaced after they have been  
worn during a collision.  
• The pre-tensioner seat belt  
assembly mechanisms become  
hot during activation. Do not  
touch the pre-tensioner seat belt  
assemblies for several minutes  
after they have been activated.  
• Do not attempt to inspect or  
replace the pre-tensioner seat  
belts yourself. This must be done  
by an authorized Kia dealer.  
• Do not strike the pre-tensioner  
seat belt assemblies.  
• Do not attempt to service or  
repair the pre-tensioner seat belt  
system in any manner.  
CAUTION  
If the pre-tensioner seat belt is not  
working properly, this warning light  
will illuminate even if there is no  
malfunction of the SRS air bag. If  
the SRS air bag warning light does  
not illuminate when the ignition  
switch is turned ON, or if it remains  
illuminated after illuminating for  
approximately 6 seconds, or if it  
illuminates while the vehicle is  
being driven, please have an  
authorized Kia dealer inspect the  
pre-tensioner seat belt and SRS air  
bag system as soon as possible.  
• Do not put anything near the  
buckle. Placing objects near the  
buckle can adversely affect the  
buckle pretensioner and may  
increase the risk of personal  
injury in the event of a collision.  
(Continued)  
3 28  
Downloaded from manuals search engine  
Safety features of your vehicle  
C020300AUN-EU  
C020306AUN-EU  
NOTICE  
Infant or small child  
Seat belt precautions  
Small children are best protected from  
injury in an accident when properly  
restrained in the rear seat by a child  
restraint system that meets the require-  
ments of the Safety Standards of your  
country. Before buying any child  
restraint system, make sure that it has a  
label certifying that it meets the Safety  
Standard of your country. The restraint  
must be appropriate for your child's  
height and weight. Check the label on  
the child restraint for this information.  
Refer to “Child restraint system” in this  
section.  
You should be aware of the specific  
requirements in your country. Child  
and/or infant seats must be properly  
placed and installed in the rear seat. For  
more information about the use of these  
restraints, refer to “Child restraint sys-  
tem” in this section.  
WARNING  
All occupants of the vehicle must  
wear their seat belts at all times.  
Seat belts and child restraints  
reduce the risk of serious or fatal  
injuries for all occupants in the  
event of a collision or sudden stop.  
Without a seat belt, occupants  
could be shifted too close to a  
deploying air bag, strike the interior  
structure or be thrown from the  
vehicle. Properly worn seat belts  
greatly reduce these hazards.  
WARNING  
Every person in your vehicle needs  
to be properly restrained at all  
times, including infants and chil-  
dren. Never hold a child in your  
arms or lap when riding in a vehi-  
cle. The violent forces created dur-  
ing a crash will tear the child from  
your arms and throw the child  
against the interior. Always use a  
child restraint appropriate for your  
child's height and weight.  
Even with advanced air bags,  
unbelted occupants can be severe-  
ly injured by a deploying air bag.  
Always follow the precautions  
about seat belts, air bags and occu-  
pant seating contained in this man-  
ual.  
3 29  
Downloaded from manuals search engine  
Safety features of your vehicle  
C020301AHM  
C020302AKM  
If the shoulder belt portion slightly touch-  
es the child’s neck or face, try placing the  
child closer to the center of the vehicle. If  
the shoulder belt still touches their face  
or neck they need to be returned to a  
child restraint system.  
Larger children  
Restraint of pregnant women  
Children who are too large for child  
restraint systems should always occupy  
the rear seat and use the available  
lap/shoulder belts.The lap portion should  
be fastened and snugged on the hips  
and as low as possible. Check if the belt  
fits periodically. A child's squirming could  
put the belt out of position. Children are  
given the most safety in the event of an  
accident when they are restrained by a  
proper restraint system in the rear seat. If  
a larger child (over age 12) must be seat-  
ed in the front seat, the child should be  
securely restrained by the available  
lap/shoulder belt and the seat should be  
placed in the rearmost position. Children  
age 12 and under should be restrained  
securely in the rear seat. NEVER place a  
child age 12 and under in the front seat.  
NEVER place a rear facing child seat in  
the front seat of a vehicle.  
Pregnant women should wear lap/shoul-  
der belt assemblies whenever possible  
according to specific recommendations  
by their doctors. The lap portion of the  
belt should be worn AS SECURELY AND  
LOW AS POSSIBLE.  
WARNING - Shoulder belts  
on small children  
• Never allow a shoulder belt to be  
in contact with a child’s neck or  
face while the vehicle is in  
motion.  
• If seat belts are not properly worn  
and adjusted on children, there is  
a risk of death or serious injury.  
WARNING - Pregnant  
women  
Pregnant women must never place  
the lap portion of the safety belt  
over the area of the abdomen  
where the fetus is located or above  
the abdomen where the belt could  
crush the fetus during an impact.  
3 30  
Downloaded from manuals search engine  
Safety features of your vehicle  
C020303AUN  
C020400AEN  
Injured person  
Care of seat belts  
WARNING  
A seat belt should be used when an  
injured person is being transported.  
When this is necessary, you should con-  
sult a physician for recommendations.  
Riding with a reclined seatback  
increases your chance of serious  
or fatal injuries in the event of a col-  
lision or sudden stop. The protec-  
tion of your restraint system (seat  
belts and air bags) is greatly  
reduced by reclining your seat.  
Seat belts must be secured against  
your hips and chest to work proper-  
ly. The more the seatback is  
reclined, the greater the chance an  
occupant's hips will slide under the  
lap belt causing serious internal  
injuries. Also, the shoulder belt  
may strike the occupant's neck.  
Drivers and passengers should  
always sit well back in their seats,  
properly belted, and with the seat-  
backs upright.  
Seat belt systems should never be disas-  
sembled or modified. In addition, care  
should be taken to assure that seat belts  
and belt hardware are not damaged by  
seat hinges, doors or other abuse.  
C020304AUN  
One person per belt  
WARNING  
Two people (including children) should  
never attempt to use a single seat belt.  
This could increase the severity of  
injuries in case of an accident.  
When you return the rear seatback  
to its upright position after the rear  
seatback has been folded down, be  
careful not to damage the seat belt  
webbing or buckle. Be sure that the  
webbing or buckle does not get  
caught or pinched in the rear seat.  
A seat belt with damaged webbing  
or buckle could possibly fail during  
a collision or sudden stop, result-  
ing in serious injury. If the webbing  
or buckles are damaged, get them  
replaced immediately.  
C020305AAM  
Do not lie down  
To reduce the chance of injuries in the  
event of an accident and to achieve max-  
imum effectiveness of the restraint sys-  
tem, all passengers should be sitting up  
and the front and rear seats should be in  
an upright position when the vehicle is  
moving. A seat belt cannot provide prop-  
er protection if the person is lying down in  
the rear seat or if the front and rear seats  
are in a reclined position.  
3 31  
Downloaded from manuals search engine  
Safety features of your vehicle  
C020401AEN  
C020403ASA  
Periodic inspection  
When to replace seat belts  
All seat belts should be inspected peri-  
odically for wear or damage of any kind.  
Any damaged parts should be replaced  
as soon as possible.  
The entire in-use seat belt assembly or  
assemblies should be replaced if the  
vehicle has been involved in an accident.  
This should be done even if no damage  
is visible. Additional questions concern-  
ing seat belt operation should be directed  
to an authorized Kia dealer.  
C020402AUN  
Keep belts clean and dry  
Seat belts should be kept clean and dry.  
If belts become dirty, they can be  
cleaned by using a mild soap solution  
and warm water. Bleach, dye, strong  
detergents or abrasives should not be  
used because they may damage and  
weaken the fabric.  
3 32  
Downloaded from manuals search engine  
Safety features of your vehicle  
CHILD RESTRAINT SYSTEM  
C030000AHM-EU  
Children could be injured or killed in a  
crash if their restraints are not properly  
secured. For small children and babies, a  
child seat or infant seat must be used.  
Before buying a particular child restraint  
system, make sure it fits your car seat  
and seat belts, and fits your child.  
Follow all the instructions provided by the  
manufacturer when installing the child  
restraint system.  
(Continued)  
Children riding in the car should sit in the  
rear seat and must always be properly  
restrained to minimize the risk of injury in  
an accident, sudden stop or sudden  
maneuver. According to accident statis-  
tics, children are safer when properly  
restrained in the rear seats than in the  
front seat. Larger children not in a child  
restraint should use one of the seat belts  
provided.  
You should be aware of the specific  
requirements in your country. Child and/or  
infant safety seats must be properly  
placed and installed in the rear seat. You  
must use a commercially available child  
restraint system that meets the require-  
ments of the safety standards of your  
country.  
• A seat belt or child restraint sys-  
tem can become very hot if it is  
left in a closed vehicle on a sunny  
day, even if the outside tempera-  
ture does not feel hot. Be sure to  
check the seat cover and buckles  
before placing a child there.  
• When the child restraint system  
is not in use, store it in the cargo  
area or fasten it with a seat belt  
so that it will not be thrown for-  
ward in case of a sudden stop or  
an accident.  
WARNING  
• A child restraint system must be  
placed in the rear seat. Never  
install a child or infant seat on the  
front passenger's seat. Should an  
accident occur and cause the  
passenger-side air bag to deploy,  
it could severely injure or kill an  
infant or child seated in an infant  
or child seat. Thus only use a  
child restraint in the rear seat of  
your vehicle.  
• Children may be seriously injured  
or killed by an inflating air bag.  
All children, even those too large  
for child restraints, must ride in  
the rear seat.  
Child restraint systems are designed to be  
secured in vehicle seats by seat belt, or by  
a tether anchor and/or LATCH anchors (if  
equipped).  
(Continued)  
3 33  
Downloaded from manuals search engine  
Safety features of your vehicle  
(Continued)  
(Continued)  
WARNING  
• Never leave children unattended  
in a vehicle – not even for a short  
time. The car can heat up very  
quickly, resulting in serious  
injuries to children inside. Even  
very young children may inadver-  
tently cause the vehicle to move,  
entangle themselves in the win-  
dows, or lock themselves or oth-  
ers inside the vehicle.  
• Never allow two children, or any  
two persons, to use the same  
seat belt.  
• Children often squirm and repo-  
sition themselves improperly.  
Never let a child ride with the  
shoulder belt under their arm or  
behind their back. Always proper-  
ly position and secure children in  
the rear seat.  
• Never use an infant carrier or a  
child safety seat that "hooks"  
over a seatback, it may not pro-  
vide adequate security in an acci-  
dent.  
• Seat belts can become very hot,  
especially when the car is parked  
in direct sunlight. Always check  
the seat belt buckles before fas-  
tening them over a child.  
• After an accident, have an author-  
ized Kia dealer check the child  
restraint system, seat belt, tether  
anchor and lower anchor.  
• If there is not enough space to  
place the child restraint system  
because of the driver's seat,  
install the child restraint system  
in the rear right seat.  
To reduce the chance of serious or  
fatal injuries:  
• Children of all ages are safer  
when restrained in the rear seat.  
A child riding in the front passen-  
ger seat can be forcefully struck  
by an inflating air bag resulting in  
serious or fatal injuries.  
• Always follow the child restraint  
system manufacturer’s instruc-  
tions for installation and use of  
the child restraint.  
• Always make sure the child seat  
is secured properly in the car and  
your child is securely restrained  
in the child seat.  
• Never hold a child in your arms or  
lap when riding in a vehicle. The  
violent forces created during a  
crash will tear the child from your  
arms and throw the child against  
the car’s interior.  
• Never allow a child to stand-up or  
kneel on the seat or floor of a  
moving vehicle. During a colli-  
sion or sudden stop, the child  
can be violently thrown against  
the vehicle’s interior, resulting in  
serious injury.  
• Never put a seat belt over your-  
self and a child. During a crash,  
the belt could press deep into the  
child causing serious internal  
injuries.  
(Continued)  
(Continued)  
3 34  
Downloaded from manuals search engine  
Safety features of your vehicle  
Rearward-facing child restraint system  
For safety reasons, we recommend that  
the child restraint system be used in the  
rear seats.  
WARNING - Child seat  
installation  
• A child can be seriously injured  
or killed in a collision if the child  
restraint is not properly anchored  
to the car and the child is not  
properly restrained in the child  
restraint. Before installing the  
child restraint system, read the  
instructions supplied by the child  
restraint system manufacturer.  
WARNING  
Never place a rear-facing child  
restraint in the front passenger  
seat, because of the danger an  
inflating passenger-side air bag  
could impact the rear-facing child  
restraint and kill the child.  
CRS09  
Forward-facing child restraint system  
• If the seat belt does not operate  
as described in this section, have  
the system checked immediately  
by your authorized Kia dealer.  
• Failure to observe this manual's  
instructions regarding child  
restraint systems and the  
instructions provided with the  
child restraint system could  
increase the chance and/or  
severity of injury in an accident.  
Since all passenger seat belts move  
freely under normal conditions and only  
lock under extreme or emergency condi-  
tions (emergency lock mode), you must  
manually change these seat belts to the  
auto lock mode to secure a child  
restraint.  
OUN026150  
C030100AHM-EU  
Using a child restraint system  
For small children and babies, the use of  
a child seat or infant seat is required.The  
child seat or infant seat should be of  
appropriate size for the child and should  
be installed in accordance with the man-  
ufacturer's instructions.  
3 35  
Downloaded from manuals search engine  
Safety features of your vehicle  
E2MS103005  
OEN036101  
OEN036102  
C030102AAM-EU  
To install a child restraint system on the  
outboard or center rear seats, do the fol-  
lowing:  
1. Place the child restraint system in the  
seat and route the lap/shoulder belt  
around or through the restraint, follow-  
ing the restraint manufacturer’s  
instructions. Be sure the seat belt web-  
bing is not twisted.  
3. Pull the shoulder portion of the seat  
belt all the way out. When the shoulder  
portion of the seat belt is fully extend-  
ed, it will shift the retractor to the “Auto  
Lock” (child restraint) mode.  
Placing a passenger seat belt into  
the auto lock mode  
The auto lock mode will help prevent the  
normal movement of the child in the vehi-  
cle from causing the seat belt to loosen  
and compromise the child restraint sys-  
tem. To secure a child restraint system,  
use the following procedure.  
2. Fasten the lap/shoulder belt latch into  
the buckle. Listen for the distinct “click”  
sound.  
Position the release button so that it is  
easy to access in case of an emergency.  
3 36  
Downloaded from manuals search engine  
Safety features of your vehicle  
WARNING - Auto lock  
mode  
The lap/shoulder belt automatically  
returns to the “emergency lock  
mode” whenever the belt is allowed  
to retract fully. Therefore, the pre-  
ceding seven steps must be fol-  
lowed each time a child restraint is  
installed.  
If the retractor is not in the  
Automatic Locking mode, the child  
restraint can move when your vehi-  
cle turns or stops suddenly. A child  
can be seriously injured or killed if  
the child restraint is not properly  
anchored to the car, including set-  
ting the retractor to the Automatic  
Locking mode.  
OEN036103  
OEN036104  
4. Slowly allow the shoulder portion of  
the seat belt to retract and listen for an  
audible “clicking” or “ratcheting” sound.  
This indicates that the retractor is in  
the “Auto Lock” mode. If no distinct  
sound is heard, repeat steps 3 and 4.  
5. Remove as much slack from the belt  
as possible by pushing down on the  
child restraint system while feeding the  
shoulder belt back into the retractor.  
6. Push and pull on the child restraint  
system to confirm that the seat belt is  
holding it firmly in place. If it is not,  
release the seat belt and repeat steps  
2 through 6.  
7. Double check that the retractor is in  
the “Auto Lock” mode by attempting to  
pull more of the seat belt out of the  
retractor. If you cannot, the retractor is  
in the “Auto Lock” mode.  
When the seat belt is allowed to  
retract to its fully stowed position, the  
retractor will automatically switch  
from the “Auto Lock” mode to the  
emergency lock mode for normal  
adult usage.  
To remove the child restraint, press the  
release button on the buckle and then  
pull the lap/shoulder belt out of the  
restraint and allow the seat belt to retract  
fully.  
3 37  
Downloaded from manuals search engine  
Safety features of your vehicle  
WARNING  
A child can be seriously injured or  
killed in a collision if the child  
restraint is not properly anchored  
to the car and the child is not prop-  
erly restrained in the child restraint.  
Always follow the child seat manu-  
facturer’s instructions for installa-  
tion and use.  
OSL030025N  
OXM039034N  
WARNING - Tether strap  
C030103AEN  
1. Route the child restraint seat strap  
over the seatback.  
Never mount more than one child  
restraint to a single tether or to a  
single lower anchorage point. The  
increased load caused by multiple  
seats may cause the tethers or  
anchorage points to break, causing  
serious injury or death.  
Securing a child restraint seat with  
tether anchor system  
Child restraint hook holders are located  
on the back of the rear seatbacks.  
For vehicles with adjustable head-  
rests, route the tether strap under the  
headrest and between the headrest  
posts, otherwise route the tether strap  
over the top of the seatback.  
2. Connect the tether strap hook to the  
appropriate child restraint hook holder  
and tighten to secure the child restraint  
seat.  
3 38  
Downloaded from manuals search engine  
Safety features of your vehicle  
WARNING - Child restraint  
check  
Check that the child restraint sys-  
tem is secure by pushing and  
pulling it in different directions.  
Incorrectly fitted child restraints  
may swing, twist, tip or separate  
causing death or serious injury.  
Lower Anchor  
Position Indicator  
Lower Anchor  
WARNING - Child restraint  
anchorage  
OLM039035  
OSL030027  
C030104AHM-EU  
Child restraint symbols are located on  
the left and right rear seat backs to indi-  
cate the position of the lower anchors for  
child restraints.  
• Child restraint anchorages are  
designed to withstand only those  
loads imposed by correctly fitted  
child restraints. Under no circum-  
stances are they to be used for  
adult seat belts or harnesses or  
for attaching other items or  
equipment to the vehicle.  
• The tether strap may not work  
properly if attached somewhere  
other than the correct tether  
anchor.  
Securing a child restraint seat with  
child seat lower anchor system  
Some child seat manufacturers make  
child restraint seats that are labeled as  
LATCH or LATCH-compatible child  
restraint seats. LATCH stands for "Lower  
Anchors and Tethers for Children". These  
seats include two rigid or webbing  
mounted attachments that connect to  
two LATCH anchors at specific seating  
positions in your vehicle. This type of  
child restraint seat eliminates the need to  
use seat belts to attach the child seat in  
the rear seats.  
3 39  
Downloaded from manuals search engine  
Safety features of your vehicle  
Also, test the child restraint seat before  
you place the child in it. Tilt the seat from  
side to side. Also try to tug the seat for-  
ward. Check to see if the anchors hold  
the seat in place.  
WARNING  
• When using the vehicle's  
"LATCH" system to install a child  
restraint system in the rear seat,  
all unused vehicle rear seat belt  
metal latch plates or tabs must be  
latched securely in their seat belt  
buckles and the seat belt web-  
bing must be retracted behind  
the child restraint to prevent the  
child from reaching and taking  
hold of unretracted seat belts.  
Unlatched metal latch plates or  
tabs may allow the child to reach  
the unretracted seat belts which  
may result in strangulation and a  
serious injury or death to the  
child in the child restraint.  
CAUTION  
Do not allow the rear seat belt web-  
bing to get scratched or pinched by  
the child-seat latch and LATCH  
anchor during the installation.  
OSL030027  
LATCH anchors have been provided in  
your vehicle. The LATCH anchors are  
located in the left and right outboard rear  
seating positions. Their locations are  
shown in the illustration. There is no  
LATCH anchor provided for the center  
rear seating position.  
The LATCH anchors are located between  
the seatback and the seat cushion of the  
rear seat left and right outboard seating  
positions.  
• Do not place anything around the  
lower anchors. Also make sure  
that the seat belt is not caught in  
the lower anchors.  
Follow the child seat manufacturer’s  
instructions to properly install child  
restraint seats with LATCH or LATCH-  
compatible attachments.  
Once you have installed the LATCH child  
restraint, assure that the seat is properly  
attached to the LATCH and tether  
anchors.  
3 40  
Downloaded from manuals search engine  
Safety features of your vehicle  
WARNING  
If the child restraint is not anchored  
properly, the risk of a child being  
seriously injured or killed in a colli-  
sion greatly increases.  
WARNING - LATCH lower  
anchors  
LATCH lower anchors are only to  
be used with the left and right rear  
outboard seating positions. Never  
attempt to attach  
a
LATCH  
equipped seat in the center seating  
position. You may damage the  
anchors or the anchors may fail  
and break in a collision.  
3 41  
Downloaded from manuals search engine  
Safety features of your vehicle  
AIR BAG - ADVANCED SUPPLEMENTAL RESTRAINT SYSTEM  
C040000AUN-C1  
(1) Driver’s front air bag  
(2) Passenger’s front air bag  
(3) Side impact air bag  
(4) Curtain air bag  
WARNING  
Even in vehicles with air bags, you  
and your passengers must always  
wear the safety belts provided in  
order to minimize the risk and  
severity of injury in the event of a  
collision or rollover.  
* The actual air bags in the vehicle may differ from the illustration.  
OLM032301N  
3 42  
Downloaded from manuals search engine  
Safety features of your vehicle  
C040900AHM-EU  
• The front air bags will completely  
inflate and deflate in an instant.  
It is virtually impossible for you to see  
the air bags inflate during an accident.  
It is much more likely that you will sim-  
ply see the deflated air bags hanging  
out of their storage compartments after  
the collision.  
• In order to help provide protection in a  
severe collision, the air bags must  
inflate rapidly. The speed of the air bag  
inflation is a consequence of extremely  
short time in which a collision occurs  
and the need to inflate the air bag  
between the occupant and the vehicle  
structures before the occupant impacts  
those structures. This speed of inflation  
reduces the risk of serious or life-  
threatening injuries in a severe collision  
and is thus a necessary part of the air  
bag design.  
However, air bag inflation can also  
cause injuries which can include facial  
abrasions, bruises and broken bones  
because the inflation speed also caus-  
es the air bags to expand with a great  
deal of force.  
• There are even circumstances  
under which contact with the steer-  
ing wheel or passenger air bag can  
cause fatal injuries, especially if the  
occupant is positioned excessively  
close to the steering wheel or pas-  
senger air bag.  
How does the air bag system  
operate  
• Air bags are activated (able to inflate if  
necessary) only when the ignition  
switch is turned to the ON or START  
position.  
• Air bags inflate instantly in the event of  
a serious frontal collision or side colli-  
sion in order to help protect the occu-  
pants from serious physical injury.  
Also, the side and/or curtain air bags  
inflate instantly in the event of a  
rollover in order to help protect the  
occupants from serious physical injury.  
WARNING  
• To avoid severe personal injury  
or death caused by deploying air  
bags in a collision, the driver  
should sit as far back from the  
steering wheel air bag as possi-  
ble (at least 250 mm (10 inches)  
away). The front passengers  
should always move their seats  
as far back as possible and sit  
back in their seat.  
• There is no single speed at which the  
air bags will inflate.  
Generally, air bags are designed to  
inflate based upon the severity of a col-  
lision and its direction. These two fac-  
tors determine whether the sensors  
produce an electronic deployment/  
inflation signal.  
• Air bag deployment depends on a  
number of factors including vehicle  
speed, angles of impact and the densi-  
ty and stiffness of the vehicles or  
objects which your vehicle hits in the  
collision. The determining factors are  
not limited to those mentioned above.  
• Air bags inflate instantly in the  
event of a collision, and passen-  
gers may be injured by the air bag  
expansion force if they are not in  
a proper position.  
• Air bag inflation may cause  
injuries including facial or bodily  
abrasions, injuries from broken  
glasses or burns.  
3 43  
Downloaded from manuals search engine  
Safety features of your vehicle  
C040902AUN  
WARNING  
Noise and smoke  
When the air bags deploy, the air  
bag related parts in the steering  
wheel and/or instrument panel  
and/or in both sides of the roof rails  
above the front and rear doors are  
very hot. To prevent injury, do not  
touch the air bag storage area’s  
internal components immediately  
after an air bag has inflated.  
When the air bags inflate, they make a  
loud noise and they leave smoke and  
powder in the air inside of the vehicle.  
This is normal and is a result of the igni-  
tion of the air bag inflator. After the air  
bag inflates, you may feel substantial dis-  
comfort in breathing due to the contact of  
your chest with both the seat belt and the  
air bag, as well as from breathing the  
smoke and powder. Open your doors  
and/or windows as soon as possible  
after impact in order to reduce dis-  
comfort and prevent prolonged expo-  
sure to the smoke and powder.  
1JBH3051  
C040903AEN  
Do not install a child restraint on the  
front passenger’s seat.  
Never place a rear-facing child restraint  
in the front passenger’s seat. If the air  
bag deploys, it would impact the rear-fac-  
ing child restraint, causing serious or  
fatal injury.  
In addition, do not place front-facing child  
restraints in the front passenger’s seat  
either. If the front passenger air bag  
inflates, it could cause serious or fatal  
injuries to the child.  
Though smoke and powder are non-  
toxic, it may cause irritation to the skin  
(eyes, nose and throat, etc). If this is the  
case, wash and rinse with cold water  
immediately and consult a doctor if the  
symptom persists.  
3 44  
Downloaded from manuals search engine  
Safety features of your vehicle  
When the ignition switch is turned ON,  
the warning light should illuminate for  
approximately 6 seconds, then go off.  
Have the system checked if:  
• The light does not turn on briefly when  
you turn the ignition ON.  
WARNING  
• Extreme Hazard! Do not use a  
rearward facing child restraint on  
a seat protected by an air bag in  
front of it!  
• Never put a child restraint in the  
front passenger’s seat. If the front  
passenger air bag inflates, it  
would cause serious or fatal  
injuries.  
• When children are seated in the  
rear outboard seats of vehicle  
equipped with side and/or curtain  
air bags, be sure to install the  
child restraint system as far away  
from the door side as possible,  
and securely lock the child  
restraint system in position.  
• The light stays on after illuminating for  
approximately 6 seconds.  
• The light comes on while the vehicle is  
in motion.  
• The light blinks when the ignition  
switch is in ON position.  
W7-147  
C041000AAM  
Air bag warning light  
The purpose of the air bag warning light  
in your instrument panel is to alert you of  
a potential problem with your air bag -  
Supplemental Restraint System (SRS).  
Inflation of side and/or curtain air  
bags could cause serious injury  
or death to an infant or child.  
3 45  
Downloaded from manuals search engine  
Safety features of your vehicle  
Driver’s front air bag (1)  
11. Occupant detection system (Front  
passenger’s seat only)  
12. Driver’s and front passenger’s seat  
belt buckle sensors  
13. Front anchor pre-tensioner  
The SRSCM continually monitors all  
SRS components while the ignition  
switch is ON to determine if a crash  
impact is severe enough to require air  
bag deployment or pre-tensioner seat  
belt deployment.  
The SRS air bag warning light on the  
instrument panel will illuminate for about  
6 seconds after the ignition switch is  
turned to the ON position, after which the  
SRS air bag warning light should go out.  
OKM039160L  
B240B01L  
C040100AHM-EU  
The front air bag modules are located  
both in the center of the steering wheel  
and in the front passenger's panel above  
the glove box. When the SRSCM detects  
a sufficiently severe impact to the front of  
the vehicle, it will automatically deploy  
the front air bags.  
SRS components and functions  
The SRS consists of the following com-  
ponents:  
1. Driver's front air bag module  
2. Passenger's front air bag module  
3. Side impact air bag modules  
4. Curtain air bag modules  
5. Retractor pre-tensioner assemblies  
6. Air bag warning light  
WARNING  
If any of the following conditions  
occurs, this indicates a malfunction  
of the SRS. Have an authorized Kia  
dealer inspect the air bag system  
as soon as possible.  
• The light does not turn on briefly  
when you turn the ignition ON.  
• The light stays on after illuminat-  
ing for approximately 6 seconds.  
• The light comes on while the  
vehicle is in motion.  
• The light blinks when the ignition  
switch is in ON position.  
7. SRS control module (SRSCM)/  
Rollover sensor  
8. Front impact sensors  
9. Side impact sensors  
10. PASSENGER AIR BAG “ OFF ” indi-  
cator (Front passenger’s seat only)  
3 46  
Downloaded from manuals search engine  
Safety features of your vehicle  
Driver’s front air bag (2)  
Driver’s front air bag (3)  
Passenger’s front air bag  
B240B02L  
B240B03L  
B240B05L  
Upon deployment, tear seams molded  
directly into the pad covers will separate  
under pressure from the expansion of the  
air bags. Further opening of the covers  
then allows full inflation of the air bags.  
A fully inflated air bag, in combination  
with a properly worn seat belt, slows the  
driver's or the passenger's forward  
motion, reducing the risk of head and  
chest injury.  
WARNING  
• Do not install or place any acces-  
sories (drink holder, cassette  
holder, sticker, etc.) on the front  
passenger's panel above the  
glove box in a vehicle with a pas-  
senger's air bag. Such objects  
may become dangerous projec-  
tiles and cause injury if the pas-  
senger's air bag inflates.  
After complete inflation, the air bag  
immediately starts deflating, enabling the  
driver to maintain forward visibility and  
the ability to steer or operate other con-  
trols.  
• When installing a container of liq-  
uid air freshener inside the vehi-  
cle, do not place it near the  
instrument cluster nor on the  
instrument panel surface.  
It may become a dangerous pro-  
jectile and cause injury if the pas-  
senger's air bag inflates.  
3 47  
Downloaded from manuals search engine  
Safety features of your vehicle  
(Continued)  
WARNING  
• Before you replace a fuse or dis-  
connect a battery terminal, turn  
the ignition switch to the LOCK  
position and remove the ignition  
switch. Never remove or replace  
the air bag related fuse(s) when  
the ignition switch is in the ON  
position. Failure to heed this  
warning will cause the SRS air  
bag warning light to illuminate.  
• If an air bag deploys, there may  
be a loud noise followed by a fine  
dust released in the vehicle.  
These conditions are normal and  
are non-toxic - the air bags are  
packed in this fine powder. The  
dust generated during air bag  
deployment may cause skin or  
eye irritation as well as aggravate  
asthma for some persons.  
Always wash all exposed skin  
areas thoroughly with lukewarm  
water and a mild soap after an  
accident in which the air bags  
were deployed.  
OSL030055N  
C040300AAM  
Occupant Detection System  
(ODS)  
Your vehicle is equipped with an occu-  
pant detection system in the front pas-  
senger's seat.  
• The SRS can function only when  
the ignition switch is in the ON  
position. If the SRS air bag warn-  
ing light does not illuminate, or  
continuously remains on after  
illuminating for about 6 seconds  
when the ignition switch is turned  
to the ON position, or after the  
engine is started, comes on while  
driving, the SRS is not working  
properly. If this occurs, have your  
vehicle immediately inspected by  
an authorized Kia dealer.  
The occupant detection system is  
designed to detect the presence of a  
properly-seated front passenger and  
determine if the passenger's front air bag  
should be enabled (may inflate) or not.  
The driver's front air bag is not affected  
or controlled by the occupant detection  
system.  
WARNING  
Do not put anything in front of the  
(Continued)  
passenger air bag  
indicator.  
3 48  
Downloaded from manuals search engine  
Safety features of your vehicle  
Main components of the occupant  
detection system  
• A detection device located within the  
front passenger seat cushion.  
• An electronic system which deter-  
mines whether the passenger air bag  
systems should be activated or deacti-  
vated.  
• A indicator light located on the instru-  
ment panel which illuminates the  
words PASSENGER AIR BAG “OFF”  
indicating the front passenger air bag  
system is deactivated.  
If the front passenger seat is occupied by  
a person that the system determines to  
be of appropriate size, and he/she sits  
properly (sitting upright with the seatback  
in an upright position, centered on the  
seat cushion with their seat belt on, legs  
comfortably extended and their feet on  
the floor), the PASSENGER AIR BAG  
“OFF” indicator will turn off and the front  
passenger's air bag will be able to inflate,  
if necessary, in frontal crashes.  
You will find the PASSENGER AIR BAG  
“OFF” indicator on the center facia panel.  
This system detects the conditions 1~4  
in the following table and activates or  
deactivates the front passenger air bag  
based on these conditions.  
Always be sure that you and all vehicle  
occupants are seated and restrained  
properly (sitting upright with the seat in  
an upright position, centered on the seat  
cushion, with the person’s legs comfort-  
ably extended, feet on the floor, and  
wearing the safety belt properly) for the  
most effective protection by the air bag  
and the safety belt.  
• The ODS (Occupant Detection System)  
may not function properly if the passen-  
ger takes actions which can defeat the  
detection system. These include:  
(1) Failing to sit in an upright position.  
(2) Leaning against the door or center  
console.  
• The instrument panel air bag warning  
light is interconnected with the occu-  
pant detection system.  
(3) Sitting towards the sides or the front  
of the seat.  
(4) Putting legs on the dashboard or rest-  
ing them on other locations which  
reduce the passenger weight on the  
front seat.  
(5) Improperly wearing the safety belt.  
(6) Reclining the seat back.  
3 49  
Downloaded from manuals search engine  
Safety features of your vehicle  
C040301AMG  
Condition and operation in the front passenger occupant detection system  
WARNING  
Riding in an improper position or  
placing weight on the front passen-  
ger's seat when it is unoccupied by  
a passenger adversely affects the  
Occupant Detection System (ODS).  
Your ODS is designed to resist  
electronic waves, but do not place  
an electronic device such as laptop  
computer on or near the seat cush-  
ion since it may defeat the proper  
functioning of the ODS.  
Indicator/Warning light  
Devices  
Condition detected by the  
occupant detection  
system  
"PASSENGER AIR  
Front passenger  
air bag  
SRS warning light  
Off  
BAG OFF" indicator  
light  
1. Adult *1  
Off  
Activated  
2. Infant *2 or child  
restraint system with  
12 months old *3  
On  
Off  
Deactivated  
3. Unoccupied  
On  
Off  
Off  
On  
Deactivated  
Activated  
(Continued)  
4. Malfunction in the  
system  
*1) The system judges a person of adult. When a smaller adult sits in the front pas-  
senger seat, the system may recognize him/her as a child depending on his/her  
physique and posture.  
*2) Do not allow children to ride in the front passenger seat. When a larger child who  
has outgrown a child restraint system sits in the front passenger seat, the system  
may recognize him/her as an adult depending on his/her physique or posture.  
*3) Never install a child restraint system on the front passenger seat.  
3 50  
Downloaded from manuals search engine  
Safety features of your vehicle  
(Continued)  
OVQ036013N  
1KMN3663  
- Never sit with hips shifted  
towards the front of the seat.  
1KMN3665  
- Never place feet on the dash-  
board.  
- Never put a heavy load or an  
active electronic device on the  
front passenger seat or seatback  
pocket.  
OVQ036014N  
1KMN3662  
1KMN3664  
- Never lean on the door or center  
console.  
- Never sit on one side of the front  
passenger seat.  
- Never place feet on the front pas-  
senger seatback.  
- Never excessively recline the  
front passenger seatback.  
3 51  
Downloaded from manuals search engine  
Safety features of your vehicle  
Proper position  
If the PASSENGER AIR BAG “OFF” indi-  
cator is still on, ask the passenger to  
move to the rear seat.  
NOTICE  
The PASSENGER AIR BAG “OFF”  
indicator illuminates for about 4 sec-  
onds after the ignition switch is turned  
to the ON position or after the engine is  
started. If the front passenger seat is  
occupied, the occupant detection sensor  
will then classify the front passenger  
after several more seconds.  
WARNING  
Do not allow an adult passenger to  
ride in the front seat when the  
PASSENGER AIR BAG OFF” indi-  
cator is illuminated because the air  
bag will not deploy in the event of a  
crash. If the "PASSENGER AIR BAG  
OFF" indicator remains illuminated  
after the adult passenger reposi-  
tions themselves properly and the  
car is restarted, have the passenger  
move to the rear seat because the  
passenger's front air bag will not  
deploy.  
WARNING  
B990A01O  
Do not put a heavy load or an active  
electronic device (ex. laptop com-  
puter, navigation, etc.) in the front  
passenger seatback pocket or on  
the front passenger seat. Do not  
hang onto the front passenger seat.  
Do not hang any items such as  
seatback table on the front passen-  
ger seatback. Do not place feet on  
the front passenger seatback. Do  
not place any items under the front  
passenger seat. Any of these could  
interfere with proper sensor opera-  
tion.  
When an adult is seated in the front pas-  
senger seat, if the PASSENGER AIR  
BAG “OFF” indicator is on, turn the igni-  
tion switch to the LOCK position and ask  
the passenger to sit properly (sitting  
upright with the seat back in an upright  
position, centered on the seat cushion  
with their seat belt on, legs comfortably  
extended and their feet on the floor).  
Restart the engine and have the person  
remain in that position. This will allow the  
system to detect the person and to  
enable the passenger air bag.  
The "PASSENGER AIR BAG OFF"  
indicator will not change according  
to the occupants posture after the  
vehicle has been running for 30  
seconds.  
Front seat passengers must stay  
properly seated to avoid serious  
injury from a deploying air bag.  
3 52  
Downloaded from manuals search engine  
Safety features of your vehicle  
(Continued)  
(Continued)  
WARNING  
• If the front passenger seat is  
occupied by a child who is not in  
a CRS, the "PASSENGER AIR  
BAG OFF" indicator may or may  
not be on and the passenger  
airbag may or may not deploy in a  
collision. Have the child move to  
a rear seat to increase their safe-  
ty.  
• Do not modify or replace the driv-  
er or front passenger seat. Don't  
place anything on or attach any-  
thing such as a blanket or seat  
heater to the driver or front pas-  
senger seat. This can adversely  
affect the occupant detection  
system.  
• Do not place sharp objects on the  
front passenger seat. These may  
damage the occupant detection  
system, if they puncture the seat  
cushion.  
• Do not use accessory seat cov-  
ers on the front seats.  
• Accident statistics show that chil-  
dren are safer if they are  
restrained in the rear, as opposed  
to the front seat. It is recommend-  
ed that child restraints be secured  
in a rear seat, including an infant  
riding in a rear-facing infant seat,  
a child riding in a forward-facing  
child seat and an older child rid-  
ing in a booster seat.  
• Air bags can only be used once –  
have an authorized Kia dealer  
replace the air bag immediately  
after deployment.  
• The occupant detection system  
may not work properly if water,  
coffee or any other liquid includ-  
ing rain gets on the seat. Keep  
the front seat dry at all times.  
• Do not place an electronic device  
such as a laptop computer on the  
front passenger seat. Its electron-  
ic field may cause the ODS to  
switch to the "on" condition and  
thus allow the passenger airbag  
to deploy needlessly in a colli-  
sion, increasing your repair  
costs.  
• Even though your vehicle is  
equipped with the occupant  
detection system, never install a  
child restraint system in the front  
passenger's seat. A deploying air  
bag can forcefully strike a child  
resulting in serious injuries or  
death. Any child age 12 and  
under should ride in the rear seat.  
Children too large for child  
restraints should use the avail-  
able lap/shoulder belts. No matter  
what type of crash, children of all  
ages are safer when restrained in  
the rear seat.  
• If the PASSENGER AIR BAG  
“OFF” indicator is illuminated  
when the front passenger's seat  
is occupied by an adult and  
he/she sits properly (sitting  
upright with the seatback in an  
upright position, centered on the  
seat cushion with their seat belt  
on, legs comfortably extended  
and their feet on the floor), have  
that person sit in the rear seat.  
(Continued)  
(Continued)  
3 53  
Downloaded from manuals search engine  
Safety features of your vehicle  
Driver’s front air bag  
The indication of the system's presence  
are the letters "AIR BAG" embossed on  
the air bag pad cover on the steering  
wheel and the passenger's side front  
panel pad above the glove box.  
WARNING  
If the occupant detection system is  
not working properly, the SRS air  
bag warning light  
on the instru-  
ment panel will illuminate because  
the passenger's front air bag is  
connected with the occupant  
detection system. If there is a mal-  
function of the occupant detection  
system, the PASSENGER AIR BAG  
“OFF” indicator will not illuminate  
and the passenger's front air bag  
will inflate in frontal impact crashes  
even if there is no occupant in the  
front passenger's seat. If the SRS  
air bag warning light does not illu-  
minate when the ignition switch is  
turned to the ON position, remains  
illuminated after approximately 6  
seconds when the ignition switch is  
turned to the ON position, or if it  
illuminates while the vehicle is  
being driven, have an authorized  
Kia dealer inspect the occupant  
detection system and the SRS air  
bag system as soon as possible.  
The SRS consists of air bags installed  
under the pad covers in the center of the  
steering wheel and the passenger's side  
front panel above the glove box.  
The purpose of the SRS is to provide the  
vehicle's driver and/or the front passen-  
ger with additional protection than that  
offered by the seat belt system alone in  
case of a frontal impact of sufficient  
severity. The SRS uses sensors to gath-  
er information about the driver's and front  
passenger's seat belt usage and impact  
severity.  
OSL030037  
Passenger’s front air bag  
OSL030038  
C040400AAM-EU  
Driver's and passenger's front air  
bag  
Your vehicle is equipped with an  
Advanced Supplemental Restraint (Air  
Bag) System and lap/shoulder belts at  
both the driver and passenger seating  
position.  
3 54  
Downloaded from manuals search engine  
Safety features of your vehicle  
These sensors provide the ability to con-  
trol the SRS deployment based on  
whether or not the seat belts are fas-  
tened, and how severe the impact is.  
Additionally, your vehicle is equipped  
with an occupant detection system in the  
front passenger's seat. The occupant  
detection system detects the presence of  
a passenger in the front passenger's seat  
and will turn off the front passenger's air  
bag under certain conditions. For more  
detail, see "Occupant detection system"  
in this section.  
WARNING  
If the occupant detection system is  
not working properly, the SRS air  
bag warning light  
on the instru-  
ment panel will illuminate because  
the SRS air bag warning light is  
connected with the occupant  
detection system. If the SRS air bag  
warning light does not illuminate  
when the ignition switch is turned  
to the ON position, remains illumi-  
nated after approximately 6 sec-  
onds when the ignition switch is  
turned to the ON position, or if it  
illuminates while the vehicle is  
being driven, have an authorized  
Kia dealer inspect the advanced  
SRS air bag system as soon as  
possible.  
The advanced SRS offers the ability to  
control the air bag inflation with two lev-  
els. A first stage level is provided for mod-  
erate-severity impacts. A second stage  
level is provided for more severe impacts.  
WARNING  
The passenger’s front air bag is designed  
to help reduce the injury of children sit-  
ting close to the instrument panel in low  
speed collisions. However, children are  
safer if they are restrained in the rear  
seat.  
• Modification to the seat structure  
can cause the air bag to deploy at  
a different level than should be  
provided.  
• Do not place any objects under-  
neath the front seats as they  
could damage or interfere with  
the occupant detection system.  
According to the impact severity and seat  
belt usage, the SRSCM (SRS Control  
Module) controls the air bag inflation.  
Failure to properly wear seat belts can  
increase the risk or severity of injury in  
an accident.  
The seat belt buckle sensors determine if  
the driver and front passenger's seat  
belts are fastened.  
3 55  
Downloaded from manuals search engine  
Safety features of your vehicle  
NOTICE  
(Continued)  
WARNING  
• Be sure to read information about the  
SRS on the labels provided on the sun-  
visor.  
To reduce the chance of serious or  
fatal injuries and receive the maxi-  
mum safety benefit from your  
restraint system:  
• Never place a child in any child or  
booster seat in the front seat.  
• ABC – Always Buckle Children in  
the back seat. It is the safest  
place for children of any age to  
ride.  
• Front and side air bags can injure  
occupants improperly positioned  
in the front seats.  
• Move your seat as far back as  
practical from the front air bags,  
while still maintaining control of  
the vehicle.  
You and your passengers should  
never sit or lean unnecessarily  
close to the air bags. Improperly  
positioned drivers and passen-  
gers can be severely injured by  
inflating air bags.  
Manufacturers are required by gov-  
ernment regulations to provide a  
contact point concerning modifica-  
tions to the vehicle for persons with  
disabilities, which modifications  
may affect the vehicle’s advanced  
air bag system. However, Kia does  
not endorse nor will it support any  
changes to any part or structure of  
the vehicle that could affect the  
advanced air bag system, including  
the occupant detection system.  
• Advanced air bags are combined with  
pre-tensioner seat belts to help pro-  
vide enhanced occupant protection in  
frontal crashes. Front air bags are not  
intended to deploy in all frontal colli-  
sions in which sufficient protection  
can be provided by the pre-tensioner  
seat belt.  
Specifically, the front passenger  
seat, dashboard or door should not  
be replaced except by an author-  
ized Kia dealer using original Kia  
parts designed for this vehicle and  
model. Any other such replacement  
or modification could adversely  
affect the operation of the occupant  
WARNING  
Always use seat belts and child  
restraints – every trip, every time,  
everyone! Air bags inflate with con-  
siderable force and in the blink of  
an eye. Seat belts help keep occu-  
pants in proper position to obtain  
maximum benefit from the air bag.  
Even with advanced air bags,  
improperly and unbelted occupants  
can be severely injured when the  
air bag inflates. Always follow the  
precautions about seat belts, air  
bags and occupant safety con-  
tained in this manual.  
detection  
system  
and  
your  
advanced air bags. For the same  
reason, do not attach anything to  
the seat, dashboard or door, even  
temporarily. If the system is  
adversely affected, it could cause  
severe personal injuries or death in  
a collision.  
• Never lean against the door or  
center console – always sit in an  
upright position.  
(Continued)  
(Continued)  
3 56  
Downloaded from manuals search engine  
Safety features of your vehicle  
(Continued)  
(Continued)  
(Continued)  
• Do not allow a passenger to ride  
in the front seat when the PAS-  
SENGER AIR BAG “OFF” indica-  
tor is illuminated, because the air  
bag will not deploy in the event of  
a moderate or severe frontal  
crash.  
• No objects should be placed over  
or near the air bag modules on  
the steering wheel, instrument  
panel or the front passenger's  
panel above the glove box,  
because any such object could  
cause harm if the vehicle is in a  
crash severe enough to cause  
the air bags to deploy.  
• If the SRS air bag warning light  
remains illuminated while the  
vehicle is being driven, have an  
authorized Kia dealer inspect the  
air bag system as soon as possi-  
ble.  
• Air bags can only be used once –  
have an authorized Kia dealer  
replace the air bag immediately  
after deployment.  
• The SRS is designed to deploy  
the front air bags only when an  
impact is sufficiently severe and  
when the impact angle is less  
than 30° from the forward longitu-  
dinal axis of the vehicle.  
Additionally, the air bags will only  
deploy once. Seat belts must be  
worn at all times.  
• Front air bags are not intended to  
deploy in side-impact, rear-  
impact or rollover crashes. In  
addition, front air bags will not  
deploy in frontal crashes below  
the deployment threshold.  
(Continued)  
Rear impact  
OEP036096N  
Side impact  
• Never place covers, blankets or  
aftermarket seat warmers on the  
driver or front passenger seats  
as these may interfere with the  
occupant detection system.  
(Continued)  
• Do not tamper with or disconnect  
SRS wiring or other components  
of the SRS system. Doing so  
could result in injury, due to acci-  
dental deployment of the air bags  
or by rendering the SRS inopera-  
tive.  
OVQ036018N  
Rollover  
(Continued)  
1VQA2091  
3 57  
Downloaded from manuals search engine  
Safety features of your vehicle  
(Continued)  
(Continued)  
• Even though your vehicle is  
equipped with the occupant  
detection system, do not install a  
child restraint system in the front  
passenger seat position. A child  
restraint system must never be  
placed in the front seat.The infant  
or child could be severely injured  
or killed by an air bag deployment  
in case of an accident.  
• Children age 12 and under must  
always be properly restrained in  
the rear seat. Never allow chil-  
dren to ride in the front passen-  
ger seat. If a child over 12 must  
be seated in the front seat, he or  
she must be properly belted and  
the seat should be moved as far  
back as possible.  
• Sitting improperly or out of posi-  
tion can result in serious or fatal  
injury in a crash. All occupants  
should sit upright with the seat  
back in an upright position, cen-  
tered on the seat cushion with  
their seat belt on, legs comfort-  
ably extended and their feet on  
the floor until the vehicle is  
parked and the ignition key is  
removed or the engine is shut off.  
• The SRS air bag system must  
deploy very rapidly to provide  
protection in a crash. If an occu-  
pant is out of position because of  
not wearing a seat belt, the air  
bag may forcefully contact the  
occupant causing serious or fatal  
injuries.  
OSL030039  
• For maximum safety protection in  
all types of crashes, all occu-  
pants including the driver should  
always wear their seat belts  
whether or not an air bag is also  
provided at their seating position  
to minimize the risk of severe  
injury or death in the event of a  
crash. Do not sit or lean unneces-  
sarily close to the air bag while  
the vehicle is in motion.  
OLM032310N  
* The actual air bags in the vehicle may differ  
from the illustration.  
C040600AAM-EU  
Side impact air bag  
Your vehicle is equipped with a side  
impact air bag in each front seat.  
(Continued)  
3 58  
Downloaded from manuals search engine  
Safety features of your vehicle  
The purpose of the air bag is to provide  
the vehicle's driver and/or the front pas-  
senger with additional protection than  
that offered by the seat belt alone.  
• The side impact air bags are designed  
to deploy during certain side-impact  
collisions, depending on the crash  
severity, angle, speed and point of  
impact.  
• The side impact air bags do not only  
deploy on the side of the impact but  
also on the opposite side.  
• Also, both sides of the side impact air  
bags deploy in certain rollover situa-  
tions.  
(Continued)  
WARNING  
• Do not install any accessories on  
the side or near the side impact  
air bag.  
• Do not place any objects over the  
air bag or between the air bag  
and yourself.  
• Do not place any objects (an  
umbrella, bag, etc.) between the  
front door and the front seat.  
Such objects may become dan-  
gerous projectiles and cause  
injury if the supplemental side air  
bag inflates.  
• To prevent unexpected deploy-  
ment of the side impact air bag  
that may result in personal injury,  
avoid impact to the side impact  
sensor when the ignition switch  
is on.  
• The side impact air bag is sup-  
plemental to the driver's and the  
passenger's seat belt systems  
and is not a substitute for them.  
Therefore your seat belts must be  
worn at all times while the vehicle  
is in motion. The air bags deploy  
only in certain side impact or  
rollover  
conditions  
severe  
enough to cause significant  
injury to the vehicle occupants.  
• For best protection from the side  
air bag system and to avoid being  
injured by the deploying side air  
bag, both front seat occupants  
should sit in an upright position  
with the seat belt properly fas-  
tened. The driver's hands should  
be placed on the steering wheel  
at the 9:00 and 3:00 positions.  
The passenger's arms and hands  
should be placed on their laps.  
• Do not use any accessory seat  
covers.  
• Use of seat covers could reduce  
or prevent the effectiveness of  
the system.  
• The side impact air bags are not  
designed to deploy in all side impact or  
rollover situations.  
WARNING  
• If seat or seat cover is damaged,  
have the vehicle checked and  
repaired by an authorized Kia  
dealer. Inform the dealer that your  
vehicle is equipped with side  
impact air bags and an occupant  
detection system.  
Do not allow the passengers to lean  
their heads or bodies onto doors,  
put their arms on the doors, stretch  
their arms out of the window, or  
place objects between the doors  
and passengers when they are  
seated on seats equipped with side  
and/or curtain air bags.  
(Continued)  
3 59  
Downloaded from manuals search engine  
Safety features of your vehicle  
They are designed to help protect the  
heads of the front seat occupants and  
the rear outboard seat occupants in cer-  
tain side impact collisions.  
• The curtain air bags are designed to  
deploy during certain side impact colli-  
sions, depending on the crash severity,  
angle, speed and point of impact.  
• The curtain air bags do not only deploy  
on the side of the impact but also on  
the opposite side.  
• Also, both sides of the curtain air bags  
deploy in certain rollover situations.  
(Continued)  
• When children are seated in the  
rear outboard seats, they must be  
seated in the proper child  
restraint system. Make sure to  
position the child restraint sys-  
tem as far away from the door  
side as possible, and secure the  
child restraint system in a locked  
position.  
• Do not allow the passengers to  
lean their heads or bodies  
against the doors, put their arms  
on the doors, stretch their arms  
out of the window or place  
objects between the doors and  
passengers when they are seated  
on seats equipped with side  
impact and/or curtain air bags.  
OXM039055  
• The curtain air bags are not designed  
to deploy in all side impact or rollover  
situations.  
WARNING  
• In order for side and curtain air  
bags to provide the best protec-  
tion, front seat occupants and  
outboard rear occupants should  
sit in an upright position with the  
seat belts properly fastened.  
Importantly, children should sit in  
a proper child restraint system in  
the rear seat.  
• Never try to open or repair any  
components of the side and cur-  
tain air bag system. This should  
only be done by an authorized  
Kia dealer.  
Failure to follow the above men-  
tioned instructions can result in  
injury or death to the vehicle occu-  
pants in an accident.  
OLM032311N  
* The actual air bags in the vehicle may differ  
from the illustration.  
C040700AUN  
Curtain air bag  
(Continued)  
Curtain air bags are located along both  
sides of the roof rails above the front and  
rear doors.  
3 60  
Downloaded from manuals search engine  
Safety features of your vehicle  
C040800AAM  
Why didn’t my air bag go off in a  
collision? (Inflation and non-infla-  
tion conditions of the air bag)  
There are many types of accidents in  
which the air bag would not be expect-  
ed to provide additional protection.  
These include rear impacts, second or  
third collisions in multiple impact  
accidents, as well as low speed  
impacts. In other words, just because  
your vehicle is damaged and even if it  
is totally unusable, don’t be surprised  
that the air bags did not inflate.  
2
3
4
1
OSL030028/OSL030040/OSL030041/OXM039043/OSL030042  
Air bag collision sensors  
(1) SRS control module/  
Rollover sensor  
(3) Side impact sensor  
(4) Side impact sensor  
(2) Front impact sensor  
3 61  
Downloaded from manuals search engine  
Safety features of your vehicle  
(Continued)  
WARNING  
• Problems may arise if the sensor  
installation angles are changed  
due to the deformation of the  
front bumper, front end module,  
body or front doors and/or B pil-  
lar where side collision sensors  
are installed. Have the vehicle  
checked and repaired by an  
authorized Kia dealer.  
Your vehicle has been designed  
to absorb impact and deploy the  
air bag(s) in certain collisions.  
Installing bumper guards (or side  
step or running board) or replac-  
ing a bumper (or front door mod-  
ule) with non-genuine parts may  
adversely affect your vehicle’s  
collision and air bag deployment  
performance.  
• Do not hit or allow any objects to  
impact the locations where air  
bags or sensors are installed.  
This may cause unexpected air  
bag deployment, which could  
result in serious personal injury  
or death.  
• If the installation location or  
angle of the sensors is altered in  
any way, the air bags may deploy  
when they should not or they may  
not deploy when they should,  
causing severe injury or death.  
Therefore, do not try to perform  
maintenance on or around the air  
bag sensors. Have the vehicle  
checked and repaired by an  
authorized Kia dealer.  
1VQA2084  
C040801AAM  
Air bag inflation conditions  
Front air bags  
Front air bags are designed to inflate in a  
frontal collision depending on the intensi-  
ty, speed or angles of impact of the front  
collision.  
(Continued)  
3 62  
Downloaded from manuals search engine  
Safety features of your vehicle  
Also, the side impact and curtain air bags  
are designed to inflate when a rollover is  
detected by a rollover sensor.  
Although the front air bags (driver’s and  
front passenger’s air bags) are designed  
to inflate only in frontal collisions, they  
also may inflate in other types of colli-  
sions if the front impact sensors detect a  
sufficient impact. Side impact and curtain  
air bags are designed to inflate only in  
side impact collisions or rollovers. But  
they may inflate in other type of collisions  
or similar rollover situations, including  
when the vehicle is tilted such as being  
towed if the side impact sensors or  
rollover sensor detect a sufficient impact  
or rollover.  
If the vehicle chassis is impacted by  
bumps or objects on unimproved roads,  
the air bags may deploy. Drive carefully  
on unimproved roads or on surfaces not  
designed for vehicle traffic to prevent  
unintended air bag deployment.  
OVQ036018N  
1VQA2086  
C040802AUN  
Air bag non-inflation conditions  
• In certain low-speed collisions the air  
bags may not deploy. The air bags are  
designed not to deploy in such cases  
because they may not provide benefits  
beyond the protection of the seat belts  
in such collisions.  
OLM032312N  
* The actual air bags in the vehicle may differ  
from the illustration.  
Side impact and/or curtain air bags  
Side impact and/or curtain air bags are  
designed to inflate when an impact is  
detected by side collision sensors  
depending on the strength, speed or  
angles of impact resulting from a side  
impact collision.  
3 63  
Downloaded from manuals search engine  
Safety features of your vehicle  
OUN036087  
OVQ036018N  
1VQA2089  
• Air bags are not designed to inflate in  
rear collisions, because occupants are  
moved backward by the force of the  
impact. In this case, inflated air bags  
would not be able to provide any addi-  
tional benefit.  
• Front air bags may not inflate in side  
impact collisions, because occupants  
move to the direction of the collision,  
and thus in side impacts, frontal air bag  
deployment would not provide addi-  
tional occupant protection.  
• In an angled collision, the force of  
impact may direct the occupants in a  
direction where the air bags would not  
be able to provide any additional bene-  
fit, and thus the sensors may not  
deploy any air bags.  
However, if equipped with side impact  
and curtain air bags, the air bags may  
inflate depending on the intensity, vehi-  
cle speed and angles of impact.  
3 64  
Downloaded from manuals search engine  
Safety features of your vehicle  
1VQA2090  
1VQA2091  
1VQA2092  
• Just before impact, drivers often brake  
heavily. Such heavy braking lowers the  
front portion of the vehicle causing it to  
“ride” under a vehicle with a higher  
ground clearance. Air bags may not  
inflate in this "under-ride" situation  
because deceleration forces that are  
detected by sensors may be signifi-  
cantly reduced by such “under-ride”  
collisions.  
• Front air bags may not inflate in  
rollover accidents because front air  
bag deployment would not provide  
additional occupant protection.  
However, if equipped with side impact  
and curtain air bags, the air bags may  
inflate in a rollover, when it is detected  
by the rollover sensor.  
• Air bags may not inflate if the vehicle  
collides with objects such as utility  
poles or trees, where the point of  
impact is concentrated to one area and  
the full force of the impact is not deliv-  
ered to the sensors.  
3 65  
Downloaded from manuals search engine  
Safety features of your vehicle  
C041100AUN  
(Continued)  
SRS Care  
WARNING  
• If the air bags inflate, they must  
be replaced by an authorized Kia  
dealer.  
• Do not tamper with or disconnect  
SRS wiring, or other components  
of the SRS system. Doing so  
could result in injury, due to acci-  
dental inflation of the air bags or  
by rendering the SRS inopera-  
tive.  
• If components of the air bag sys-  
tem must be discarded, or if the  
vehicle must be scrapped, certain  
safety precautions must be  
observed. An authorized Kia  
dealer knows these precautions  
and can give you the necessary  
information. Failure to follow  
these precautions and proce-  
dures could increase the risk of  
personal injury.  
• If your car was flooded and has  
soaked carpeting or water on  
flooring, you shouldn't try to start  
the engine; have the car towed to  
an authorized Kia dealer.  
• Modification to SRS components  
or wiring, including the addition  
of any kind of badges to the pad  
covers or modifications to the  
body structure, can adversely  
affect SRS performance and lead  
to possible injury.  
The SRS is virtually maintenance-free  
and so there are no parts you can safely  
service by yourself. If the SRS air bag  
warning light does not illuminate, or con-  
tinuously remains on, have your vehicle  
immediately inspected by an authorized  
Kia dealer.  
• For cleaning the air bag pad cov-  
ers, use only a soft, dry cloth or  
one which has been moistened  
with plain water. Solvents or  
cleaners could adversely affect  
the air bag covers and proper  
deployment of the system.  
No objects should be placed over  
or near the air bag modules on the  
steering wheel, instrument panel,  
and the front passenger's panel  
above the glove box, because any  
such object could cause harm if the  
vehicle is in a crash severe enough  
to cause the air bags to inflate.  
Any work on the SRS system, such as  
removing, installing, repairing, or any  
work on the steering wheel, the front  
passenger’s panel, front seats and roof  
rails must be performed by an authorized  
Kia dealer. Improper handling of the SRS  
system may result in serious personal  
injury.  
(Continued)  
3 66  
Downloaded from manuals search engine  
Safety features of your vehicle  
C041300AUN  
Keep occupants away from the air  
bag covers. All occupants should sit  
upright, fully back in their seats with  
their seat belts on and their feet on the  
floor. If occupants are too close to the  
air bag covers, they could be injured if  
the air bags inflate.  
Do not attach or place objects on or  
near the air bag covers. Any object  
attached to or placed on the front or  
side air bag covers could interfere with  
the proper operation of the air bags.  
Do not modify the front seats.  
Modification of the front seats could  
interfere with the operation of the sup-  
plemental restraint system sensing  
components or side air bags.  
Do not place items under the front  
seats. Placing items under the front  
seats could interfere with the operation  
of the supplemental restraint system  
sensing components and wiring har-  
nesses.  
Additional safety precautions  
WARNING  
Never let passengers ride in the  
cargo area or on top of a folded-  
down back seat. All occupants should  
sit upright, fully back in their seats with  
their seat belts on and their feet on the  
floor.  
Passengers should not move out of  
or change seats while the vehicle is  
moving. A passenger who is not wear-  
ing a seat belt during a crash or emer-  
gency stop can be thrown against the  
inside of the vehicle, against other  
occupants, or out of the vehicle.  
Each seat belt is designed to  
restrain one occupant. If more than  
one person uses the same seat belt,  
they could be seriously injured or killed  
in a collision.  
Do not use any accessories on seat  
belts. Devices claiming to improve  
occupant comfort or reposition the seat  
belt can reduce the protection provided  
by the seat belt and increase the  
chance of serious injury in a crash.  
• Sitting improperly or out of posi-  
tion can cause occupants to be  
shifted too close to a deploying  
air bag, strike the interior struc-  
ture or be thrown from the vehicle  
resulting in serious injury or  
death.  
• Always sit upright with the seat-  
back in an upright position, cen-  
tered on the seat cushion with  
your seat belt on, legs comfort-  
ably extended and your feet on  
the floor.  
• Always have the ignition OFF in  
an abnormal situation. The side  
air bags may inflate if the vehicle  
is tilted such as when being  
towed because the rollover sen-  
sor detects it as a rollover situa-  
tion.  
• Be careful not to cause impact to  
the doors when the ignition is  
ON. The air bags may inflate.  
Never hold an infant or child on your  
lap. The infant or child could be seri-  
ously injured or killed in the event of a  
crash. All infants and children should  
be properly restrained in appropriate  
child safety seats or seat belts in the  
rear seat.  
Passengers should not place hard  
or sharp objects between them-  
selves and the air bags. Carrying  
hard or sharp objects on your lap or in  
your mouth can result in injuries if an  
air bag inflates.  
3 67  
Downloaded from manuals search engine  
Safety features of your vehicle  
C041400AUN  
Adding equipment to or modify-  
ing your air bag-equipped vehicle  
If you modify your vehicle by changing  
your vehicle's frame, bumper system,  
front end or side sheet metal or ride  
height, this may affect the operation of  
your vehicle's air bag system.  
OSL030061N  
C041200AUN-EU  
Air bag warning label  
Air bag warning labels, some required by the  
Canada Motor Vehicle Safety Standards  
(CMVSS), are attached to the sunvisor to alert the  
driver and passengers of potential risks of the air  
bag system.  
3 68  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals