1990-2016 Land Rover Defender 90 SUV Controls & instruments -> Heating & ventilation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Controls & instruments -> Heating & ventilation for Your Land Rover Defender 90 SUV First Generation (1990-2016)

Heating & ventilation
39
Fresh air vents
To open the two vents in the windscreen
frame, push the lever to the right and then
downwards to the desired position and
release.
The temperature of air supplied to the fresh air
vents is not controlled by the heater.
NOTE: For vehicles fitted with an air conditioning system, the location and operation of air vents is
described on a later page (see ’Air conditioning’).
Heating & ventilation
40
HEATER CONTROLS
NOTE: For vehicles fitted with an air
conditioning system, the heater controls are
described on a later page (see ’Air
conditioning’).
1. Temperature control
Move the lever downwards (towards the
RED segment) to increase air temperature,
or upwards (towards the BLUE segment)
to reduce air temperature.
2. Air distribution control
• Lever fully up - windscreen vents only.
• Lever midway - foot level and windscreen
vents.
• Lever fully down - foot level vents (also
provides some air to the windscreen).
3. Fan speed control
• Lever at position ’0’ - no air will enter the
vehicle through the blower vents.
• Lever between positions ’0’ and’1’ -
progressively more air will enter the
vehicle, depending solely on the ram effect
of the vehicle moving through the air.
• Lever between positions ’1’ and ’2’ - the
fan will operate and progressively increase
in speed.
Heating & ventilation
41
USING YOUR HEATER
Ensure the front grille and the air intake grille
on the front wing are kept clear of
obstructions (especially snow and ice).
The following examples of basic heater
settings are intended as a general guide; the
air distribution, temperature and blower
controls can then be further adjusted to suit
your comfort requirements.
Always remember that full heating is not
available until the engine has reached its
normal operating temperature.
Maximum heating
• Temperature control - fully down.
• Distribution control - midway.
• Fan speed control - fully down.
• Fresh air vents - fully closed.
Demisting and defrosting
• Temperature control - fully down.
• Distribution control - fully up.
• Fan speed control - fully down.
• Fresh air vents - fully open for demisting
(closed for defrosting).
• Opening a window may improve
ventilation.
Maximum ventilation
• Temperature control - fully up.
• Distribution control - fully down.
• Fan speed control - fully down.
• Fresh air vents - fully open.

Related Topics

Popular Owner Manuals